Open ZB2ham opened 1 year ago
Oh I do know I have the callsign blank in the screenshot, in use I have my legit callsign in there
不清楚FT-710与FT-DX10在CAT上是否有差异。 没有输出的原因一般有以下: 1.ALC过低。可以提高手机的音量来改善ALC 2.音频没有被输出到FT-710。请检查音频线,FT-710应该是支持虚拟声卡,请检查USB Cable,或检查OTG转接 3.电台设置。有些电台的设置也会影响音频的传输,请检查电台的设置,可以参照JTDX、WSJT-X的相关的设置。
Google Translate on text above.... ########################################## It is not clear whether there is a difference in CAT between FT-710 and FT-DX10. The reasons for no output are generally as follows:
I also read that ferrite beads on the USB cable may help. I have ten beads and placed them all on the USB cable, but still no output.
Many thanks, Ken
Having considered the issues above, I investigated forcing audio to appear at the USB-c connector on my 'phone. It transpires that the availability of audio at the 'phone's USB-c connector has been removed as from Android 12! It cannot be restored in developer mode. One solution is to use a USB soundcard. Another technologically easier solution is to make a cable using a 4-pole 3.5mm connector for the 'phone's audio in and out, and connect this directly to the radio's mic and speaker-out connectors, with appropriate attenuators and DC-blocking capacitors. This should work for any version of Android to work with any radio, with no setup required. Of course changes in frequency at either end of the cable will not be reflected at the other, but this was never crucial. Of course this will not work for those 'phones that have no sockets at all. Ken
是的,USB声卡是比较好的方案。
bg7yoz
On a separate issue, is it possible to export a QSO log file in a format other than ADI eg XLS or CSV?
This would be much more useful for personal use than an ADI file. I cannot find a converter utility on the www.
Many thanks
Ken Ruiz
Sent from my HAL9000 computer
From: bg7yoz @.> Sent: Tuesday, May 9, 2023 12:43:29 PM To: N0BOY/FT8CN @.> Cc: ZB2ham @.>; Author @.> Subject: Re: [N0BOY/FT8CN] FT-710 will not transmit (Issue #38)
是的,USB声卡是比较好的方案。
bg7yoz
― Reply to this email directly, view it on GitHubhttps://github.com/N0BOY/FT8CN/issues/38#issuecomment-1539934413, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A7R67UVS2WZDZKKLBHW5X7TXFINVDANCNFSM6AAAAAAXTHLJ4I. You are receiving this because you authored the thread.Message ID: @.***>
暂时不支持CSV或XLS格式,以后也许会考虑增加这个选项。
Many thanks. I have a work- around meanwhile. I was made aware of an ADI to CSV converter at https://ad1c.us/software/ADIF_to_CSV/index.html which is read by Excel.
A few macros and l have my logbook!
Many thanks,
Ken Ruiz
Sent from my HAL9000 computer
From: bg7yoz @.> Sent: Monday, May 15, 2023 4:02:04 AM To: N0BOY/FT8CN @.> Cc: ZB2ham @.>; Author @.> Subject: Re: [N0BOY/FT8CN] FT-710 will not transmit (Issue #38)
暂时不支持CSV或XLS格式,以后也许会考虑增加这个选项。
― Reply to this email directly, view it on GitHubhttps://github.com/N0BOY/FT8CN/issues/38#issuecomment-1547089760, or unsubscribehttps://github.com/notifications/unsubscribe-auth/A7R67UR4GAENC22OTN2SZG3XGGFBZANCNFSM6AAAAAAXTHLJ4I. You are receiving this because you authored the thread.Message ID: @.***>
I have posted my personal low-tech, low-cost solution to lack of audio at the USB-C connector in Android 12.
See Discussions > Categories > Show & Tell > Audio Link
I hope this is of some use.
Ken
Hi. Have the latest version of FT8CN, v.0.88 All works as advertised using a Motorola android smartphone, lining to the rig with a (USB-B - to - USB-A cable) and a (USB A-to-C) OTG adaptor. I have tried a (USB A to C) cable but this will not permit the phone to recognise a radio. The decoding happens without issue, and everything works fine EXCEPT THAT the radio will NOT transmit. When the time comes to transmit, the rig is activated accordingly but no output ensues. Without a specific profile for the 710, I have entered the nearest available which is the FT-DX10 profile I have uploaded a screenshot of my settings Help!