FT8CN ver 0.90 (checked w/ 0.88 (problem confirmed) /0.87(not sure about version)).
Rig Yaesu FT-991A
Problem: incorrect MODE setting while using FT8CN.
Reproduce:
rig is powered on, freq is set to 18100, MODE = DATA-USB, width, agc, already set as expected.
connecting cable to smartphone, run FT8CN - freq still here, MODE changed to USB (here is problem = limited bw and transmission not possible at all) = expected mode DATA-USB (MD0C?)
change MODE to D-U/DATA-USB manually, freq shifting +70hz, manually correct it on rig = made some some good stuff, CQ and DXing, works perfectly
... until I go to Settings to change freq, for example - MODE change again to USB, need to revert it back after completing setup.
Of course, rig already checked and work just fine on WSJT-X setup in field and stationary.
Not a big deal, but sometimes it's a bit annoying especially when forgot to change settings and lost interesting CQ :face_with_spiral_eyes:
Also this can be my ordinary mistake and some kind of mis-configuration on rig, I'll can get it )
FT8CN ver 0.90 (checked w/ 0.88 (problem confirmed) /0.87(not sure about version)).
Rig Yaesu FT-991A
Problem: incorrect MODE setting while using FT8CN.
Reproduce:
Of course, rig already checked and work just fine on WSJT-X setup in field and stationary.
Not a big deal, but sometimes it's a bit annoying especially when forgot to change settings and lost interesting CQ :face_with_spiral_eyes:
Also this can be my ordinary mistake and some kind of mis-configuration on rig, I'll can get it )
TNX DE UB6LUM