search

NARUTOfzr / Neptune_3

source code
71 stars 26 forks source link

Neptune 3：Specify the print layer pause function #38

Open NARUTOfzr opened 1 year ago

NARUTOfzr commented 1 year ago

Tutorial in progress... 如图所示切片保存即可。 As shown in the picture. image image

denoogle commented 1 year ago

Hi @NARUTOfzr, I've tried 'Pause at Height' with Cura. Is it possible it only works with files saved on SD Card and not if the printer is connect by USB cable?

NARUTOfzr commented 1 year ago

@denoogle Online printing is cura as the upper computer software, and cura does not recognize the M0 code, so cura online can not use M0 to pause. I try toprint using octoprint and print using TF card, both of which can be paused using M0.

vpn commented 1 year ago

Z-Axis is 5mm higher after the pause. Using latest beta version of firmware and used the same settings as above. @NARUTOfzr any idea why? G Code result when I search for "pause"

NARUTOfzr commented 1 year ago

M0 and the pause button are the same function. Use M0 code, no need to add other gcode.

---Original--- From: @.> Date: Sun, Mar 5, 2023 08:53 AM To: @.>; Cc: @.**@.>; Subject: Re: [NARUTOfzr/Neptune_3] Neptune 3：Specify the print layer pause function (Issue #38)

Z-Axis is 5mm higher after the pause. Using latest beta version of firmware and used the same settings as above. @NARUTOfzr any idea why?

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you were mentioned.Message ID: @.***>