search

NARUTOfzr / Neptune_3_Pro_Plus_Max

Firmware file
187 stars 23 forks source link

Rolling back the firmware #24

Closed br0cker closed 1 year ago

br0cker commented 1 year ago

Hi.

I have updated the screen firmware to 1_5beta_20230114.tft. I wanted to bring back the firmware, but when updating I get a message: Model does not match, TJC4827X243_011C, File info ERROR! I tried [V1_4_1_20230210.tft] [elegooui_20221122.tft] And I still get this message. Please help me.

Neptune 3 Pro

BenKmann commented 1 year ago

Hi, my Fan starts working at around the third layer. Have you tried waiting?

NARUTOfzr commented 1 year ago

@br0cker

  1. Download the firmware package and decompress it to obtain the firmware. image

  2. Format TF card to FAT32 4096 bytes

  3. Update the screen firmware

NARUTOfzr commented 1 year ago

Hi, my Fan starts working at around the third layer. Have you tried waiting?

This is usually set by the slicing software: image

br0cker commented 1 year ago

Hi. Thank you very much. I did it. My mistake was that I did not download the entire archive, but the files separately. Good luck.

br0cker commented 1 year ago

Hi, my Fan starts working at around the third layer. Have you tried waiting?

Hi. Thanks for the reply. I was scared, I thought it was because of the new firmware. It turned out that everything is exactly as you write. Have a nice day.