search

NARUTOfzr / Neptune_3_Pro_Plus_Max

Firmware file
180 stars 22 forks source link

Doesn't Save Fan Control Settings #52

Closed AhmedShaalan closed 1 year ago

AhmedShaalan commented 1 year ago

I have updated my machine to 1.4.1 for the screen, and 1.1.5.1a for the board. and since then, I enable Fan Control from the Settings Menu. However, the settings gets turned off automatically between print jobs and when the machine turns off.

I think this is critical because it might melt down the extruder.

NARUTOfzr commented 1 year ago

@AhmedShaalan When the temperature at the hot end is higher than 50 ° C, the fan at the hot end automatically starts. The fan turned on in this setting is the model cooling fan. Model cooling fan on both sides of the print head: Usually turned on when printing the second layer, this is controlled by the G-code of the print file, which will be turned off when printing is complete.