search

NARUTOfzr / Neptune_3_Pro_Plus_Max

Firmware file
180 stars 22 forks source link

Front right value not storing #61

Open ChrisCopter opened 1 year ago

ChrisCopter commented 1 year ago

Hey guys,

I have a Neptune 3 Pro printer. After leveling, the front right value does not store, while all the other values do. Additionally, the nozzle hits the bed after confirming the leveling prompt, even though I have a perfect offset from the last leveling and the correct values set. Firmware is 1.5.1a.

What could be causing these issues?

Please help me troubleshoot this problem.

Thank you!

NARUTOfzr commented 1 year ago

Hi! Usually restoring the factory Settings or updating the firmware can fix this problem, please try it.

---Original--- From: @.> Date: Sat, May 27, 2023 03:17 AM To: @.>; Cc: @.***>; Subject: [NARUTOfzr/Neptune_3_Pro_Plus_Max] Front right value not storing (Issue #61)

Hey guys,

I have a Neptune 3 Pro printer. After leveling, the front right value does not store, while all the other values do. Additionally, the nozzle hits the bed after confirming the leveling prompt, even though I have a perfect offset from the last leveling and the correct values set. Firmware is 1.5.1a.

What could be causing these issues?

Please help me troubleshoot this problem.

Thank you!

— Reply to this email directly, view it on GitHub, or unsubscribe. You are receiving this because you are subscribed to this thread.Message ID: @.***>