search

NARUTOfzr / Neptune_3_Pro_Plus_Max

Firmware file
180 stars 22 forks source link

M355 values no longer in EEProm ? #65

Open Rudi56 opened 1 year ago

Rudi56 commented 1 year ago

Neptune 3 Pro Since 1.1.5.1.b the Value for M355 are not longer stored in EEProm with the M500 command. In Prior versions the M500 stores the values for the LED Brigtness and the ON/OFF Status in Eprom, so next Power on set the same values. (Values are set with M355 S1 P32 and tryed to store with M500.

Can You please use the Values for M355 again in the EEProm.

Thanks, Rudi

NARUTOfzr commented 11 months ago

hi! @Rudi56 I tried the operation you described, set M355 S1 P32 in the online state, save with M500, then restart the machine, and then use M355 S1 control to turn on the LED, as shown in the following picture.

image

This is version 1.1.5.1b, and the M500 can still store the Settings of the M355. I wonder if that's what you're talking about? I also consulted the software engineer and he said that he had not changed this item.