Open DavidHuber-NOAA opened 1 month ago
@DavidHuber-NOAA The ip/5.0.0 has been installed on acorn for preparation testing. Please load and test: module use /lfs/h1/emc/nceplibs/noscrub/hpc-stack/libs/hpc-stack/modulefiles/compiler/intel/19.1.3.304 module load ip/5.0.0
Thank you @Hang-Lei-NOAA. Unfortunately, I do not have a good way to test this installation on Acorn. The GSI, UFS_Utils, and GSI-utils all use this library, but they are not currently ported to Acorn and I'm not sure how extensively these applications would test the library.
@edwardhartnett @AlexanderRichert-NOAA Could you point me to a test (tests) to verify that the IP library is working correctly?
@David Our unit test cannot guarantee its working in the model. Therefore, modeling test is the necessary step for verification.
On Mon, Sep 16, 2024 at 3:59 PM David Huber @.***> wrote:
Thank you @Hang-Lei-NOAA https://github.com/Hang-Lei-NOAA. Unfortunately, I do not have a good way to test this installation on Acorn. The GSI, UFS_Utils, and GSI-utils all use this library, but they are not currently ported to Acorn and I'm not sure how extensively these applications would test the library.
@edwardhartnett https://github.com/edwardhartnett @AlexanderRichert-NOAA https://github.com/AlexanderRichert-NOAA Could you point me to a test (tests) to verify that the IP library is working correctly?
— Reply to this email directly, view it on GitHub https://github.com/NOAA-EMC/WCOSS2-requests/issues/9#issuecomment-2353800057, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKWSMFGZGLYKIY4BL4IONL3ZW42ANAVCNFSM6AAAAABOGAPDOKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNJTHAYDAMBVG4 . You are receiving this because you were mentioned.Message ID: @.***>
@DavidHuber-NOAA would you be able to use the stack-stack 1.7.0 or 1.8.0 installations on Acorn to test? Both have ip 5.0.
Alright, I will try getting the GSI on Acorn. Working with the spack-stack installation there should make that effort much easier.
@AlexanderRichert-NOAA I do not see a module file for crtm under /lfs/h1/emc/nceplibs/noscrub/spack-stack/spack-stack-1.8.0/envs/ue-intel-19.1.3.304/install/modulefiles/intel/19.1.3.304
. Am I looking in the right place?
Ah, disregard. I see I should be looking in the mpich suite of modules.
@DavidHuber-NOAA did you get to ip-5.0.0 and did it work for you?
@edwardhartnett I need to finish porting/testing the GSI on Acorn first, then I can test this installation. I hope to finish with all of that by the end of the week.
Opened GSI port to Acorn PR https://github.com/NOAA-EMC/GSI/pull/793.
I have been on sick leave the latter half of the week, so I won’t get to this today. I’ll try again next week.
Briefly: initial results show differences between ip 2.3.3 and 5.0 in (IIRC) the RRFS regression test.
@Hang-Lei-NOAA As a prerequisite to porting the GSI to Acorn, I will also need CRTM v2.4.0.1 installed there. This version is already installed on Cactus and Dogwood, so I would only need the Acorn install. Should I open another request for that?
All software installed on cactus must have been installed on acorn already. No test no delivery. @David Huber - NOAA Affiliate @.***> please remember that /lfs/h1/emc/nceplibs/noscrub/hpc-stack/libs/hpc-stack/modulefiles is our EMC maintained library structure on acorn, It should contain the largest available sets for EMC use.
Please check out module use /lfs/h1/emc/nceplibs/noscrub/hpc-stack/libs/hpc-stack/modulefiles/compiler/intel/19.1.3.304 module load crtm/2.4.0.1
On Wed, Oct 2, 2024 at 1:59 PM David Huber @.***> wrote:
@Hang-Lei-NOAA https://github.com/Hang-Lei-NOAA As a prerequisite to porting the GSI to Acorn, I will also need CRTM v2.4.0.1 installed there. This version is already installed on Cactus and Dogwood, so I would only need the Acorn install. Should I open another request for that?
— Reply to this email directly, view it on GitHub https://github.com/NOAA-EMC/WCOSS2-requests/issues/9#issuecomment-2389294699, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKWSMFFKWOWPQINF4QWYKODZZQYBHAVCNFSM6AAAAABOGAPDOKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGOBZGI4TINRZHE . You are receiving this because you were mentioned.Message ID: @.***>
Ah, very good. Thanks for the reminder @Hang-Lei-NOAA.
@Hang-Lei-NOAA I tested IP v5.0.0 within the GSI and all results are identical to IP v3.3.3/SP v2.3.3, so I think we are good to go.
Okay, I will go ahead to process it.
On Fri, Oct 4, 2024 at 11:50 AM David Huber @.***> wrote:
@Hang-Lei-NOAA https://github.com/Hang-Lei-NOAA I tested IP v5.0.0 within the GSI and all results are identical to IP v3.3.3/SP v2.3.3, so I think we are good to go.
— Reply to this email directly, view it on GitHub https://github.com/NOAA-EMC/WCOSS2-requests/issues/9#issuecomment-2393988510, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKWSMFCATFXQAXZZ2ZWRKRLZZ2ZTTAVCNFSM6AAAAABOGAPDOKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGOJTHE4DQNJRGA . You are receiving this because you were mentioned.Message ID: @.***>
Has this been submitted to NCO?
Not yet, any other issues on this?
On Mon, Oct 7, 2024 at 9:15 AM Edward Hartnett @.***> wrote:
Has this been submitted to NCO?
— Reply to this email directly, view it on GitHub https://github.com/NOAA-EMC/WCOSS2-requests/issues/9#issuecomment-2396904141, or unsubscribe https://github.com/notifications/unsubscribe-auth/AKWSMFE6QDPTKK7L4YRN2N3Z2KCOPAVCNFSM6AAAAABOGAPDOKVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGOJWHEYDIMJUGE . You are receiving this because you were mentioned.Message ID: @.***>
The R2O delivery instruction is : https://docs.google.com/document/d/1Fl_lmsqkbpRnRGlfJCgONYYAsKQK-EcBeLz097DK_pE/edit?usp=sharing
Any progress on this issue?
It’s still on NCO’s waiting list for installation.
The new ip library version acquired the all sp functionallity, rendering the latter obsolete. It would be convenient for multiple repositories to have ip v5.0.0 installed on all platforms so that CMake recipes can be updated to exclude sp.