search

NRC-Research / SNAP-issues

This repository was created to provide a public location to record and display the status of "issues" for the SNAP application. The SNAP developers will acknowledge, provide (and maybe request) feedback on the reported issues, and in general use the information to improve SNAP code.
3 stars 0 forks source link

PROGRAM MELGEN BLOCK DOESN'T EXIST BUT IS REQUIRED #18

Closed NRCgg closed 2 years ago

NRCgg commented 2 years ago

From Chang Hyun Song in Hanyang university in Republic of Korea:

We are using MELCOR code through SNAP program. we were using the SNAP 3.1.3 version that there is a no calculation error. However, After we update to the recent version of SNAP which is 3.1.9 version, additional error is occurring despite the same MELCOR input. So, we can't calculate additional analysis. Please confirm the below error message and advise how to resolve this issue.

hanyang-issue
wrd-apt commented 2 years ago

I was unable to reproduce this error using models we have available for testing. Would it be possible to transmit the MED file or the original MELGEN input file? I expect that an error is occurring during the ASCII export process that is preventing the model from exporting correctly. If you cannot send the input file, perhaps you could send the model editor screen file (/.snap/3.0/me.screen).

dul-apt commented 2 years ago

Newer versions of the MELCOR plug-in have been tested with a suite of input models from 1.86 to 2.2. The error reported has not been encountered.