Issure for coupling running SOWFA and openFAST2.6.0 as "example.NREL5MW.ALMAdvancedFAST8"

[chatianming]

I install the SOWFA and openFAST 2.6.0. I have some problems when I run the case named "example.NREL5MW.ALMAdvancedFAST8", becaue the case named "example.NREL5MW.ALMAdvancedFAST8" is for fastV8, so I copy the relevant files in r-test2.6.0 and mend the .fst. All my files are uploaded in attachment. Could you give the case that can be running if possible, very thank you. best wishes the errors are as follow:

openFAST input file heading: FAST Certification Test #26: NREL 5.0 MW Baseline Wind Turbine (Onshore)

Running ElastoDyn. Nodal outputs section of ElastoDyn input file not found or improperly formatted. Running BeamDyn. Nodal outputs section of BeamDyn input file not found or improperly formatted. Running BeamDyn. Nodal outputs section of BeamDyn input file not found or improperly formatted. Running BeamDyn. Nodal outputs section of BeamDyn input file not found or improperly formatted. Running AeroDyn. AD15 Nodal Outputs: Nodal output section of AeroDyn input file not found or improperly formatted. Skipping nodal outputs. Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 1, blade 1) Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 2, blade 1) Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 3, blade 1) Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 4, blade 1) Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 1, blade 2) Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 2, blade 2) Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 3, blade 2) Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 4, blade 2) Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 1, blade 3) Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 2, blade 3) Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 3, blade 3) Warning: Turning off Unsteady Aerodynamics because C_nalpha is 0. (node 4, blade 3) [0] #0 Foam::error::printStack(Foam::Ostream&) at ??:? [0] #1 Foam::sigSegv::sigHandler(int) at ??:? [0] #2 ? in "/lib/x86_64-linux-gnu/libpthread.so.0" [0] #3 fast_subs_MOD_fast_initializeall at ??:? [0] #4 fast_subs_MOD_fast_initializeall_t at ??:? [0] #5 FAST_OpFM_Init at ??:? [0] #6 fast::OpenFAST::init() at ??:? [0] #7 Foam::turbineModels::horizontalAxisWindTurbinesALMOpenFAST::initialize() at ??:? [0] #8 Foam::turbineModels::horizontalAxisWindTurbinesALMOpenFAST::horizontalAxisWindTurbinesALMOpenFAST(Foam::GeometricField<Foam::Vector, Foam::fvPatchField, Foam::volMesh> const&) at ??:? [0] #9 ? in "/home/zhao/OpenFOAM/zhao-2.4.x/platforms/linux64GccDPOpt/bin/pisoFoamTurbine.ALMAdvancedOpenFAST" [0] #10 __libc_start_main in "/lib/x86_64-linux-gnu/libc.so.6" [0] #11 ? in "/home/zhao/OpenFOAM/zhao-2.4.x/platforms/linux64GccDPOpt/bin/pisoFoamTurbine.ALMAdvancedOpenFAST" [ubuntu:04880] Process received signal [ubuntu:04880] Signal: Segmentation fault (11) [ubuntu:04880] Signal code: (-6) ----------------------------------------------------------------------------------------------------------------------- example.NREL5MW.ALMAdvancedFAST8.zip

[ewquon]

I would recommend doing a test run of your modified FAST input files with standalone openfast (you'll need to set CompInflow in the .fst from 2 to 1, and give an appropriate InflowWind input). After you've verified that that is working, then the next thing to check is your turbineArrayProperties and make sure the inputs being passed to OpenFAST are reasonable. https://github.com/NREL/SOWFA/blob/103832ebbae07b62220858a1e3da4b5e7d6375bd/src/turbineModels/turbineModelsOpenFAST/horizontalAxisWindTurbinesALMOpenFAST/horizontalAxisWindTurbinesALMOpenFAST.C#L409-L454

[chatianming]

Very thank you, and I want to confirm that the SOLVERS of "pisoFoamTurbine.ALMAdvancedOpenFAST" completly installed. So I really need a complete case to test the solvers of "pisoFoamTurbine.ALMAdvancedOpenFAST" coupled of 2.4.x and openFAST 2.6, but the case in the GitHub is for fastV8, so could you upload a complete case to help me to test the solver.

in addition, I also want to know how to run a openFAST2.6 case in the linux system? where should I find or compile those files such DISCON_glin32.so for openFAST2.6 in Linux ?

very thank you! @ewquon

[ewquon]

You can find an example controller here: https://github.com/OpenFAST/r-test/tree/main/glue-codes/openfast Or you can use a more general generic controller from here: https://github.com/NREL/ROSCO

Unfortunately, we don't have the bandwidth to support any of these old codes, so I don't have any test cases to share. Given that this is open-source, you should look at https://github.com/NREL/SOWFA/tree/master/src/turbineModels/turbineModelsOpenFAST/horizontalAxisWindTurbinesALMOpenFAST to help resolve any issues you encounter at runtime.

If you use https://github.com/NREL/SOWFA-6/tree/dev, we have more up-to-date turbine ALM coupled to OpenFAST.

[Didi-X]

@ewquon I want to confirm whether the current SOWFA does not support the operation of beamdyn module. When I set CompElast in the.fst file to 1=ElastoDyn, the coupling case can run. But when I set it to 2=ElastoDyn + BeamDyn for blades. It starts with the following error: Running BEM. [0] #0 Foam::error::printStack(Foam::Ostream&) at ??:? [0] #1 Foam::sigSegv::sigHandler(int) at ??:? [0] #2 ? in "/lib/x86_64-linux-gnu/libpthread.so.0" [0] #3 modmesh_mpmeshcopy at ??:? [0] #4 openfoam_mp_initopfm at ??:? [0] #5 fast_subs_mp_fastinitializeall at ??:? [0] #6 fast_subs_mp_fast_initializeallt at ??:? [0] #7 FAST_OpFM_Init at ??:? [0] #8 fast::OpenFAST::init() at ??:? [0] #9 Foam::turbineModels::horizontalAxisWindTurbinesALMOpenFAST::initialize() at ??:? [0] #10 Foam::turbineModels::horizontalAxisWindTurbinesALMOpenFAST::horizontalAxisWindTurbinesALMOpenFAST(Foam::GeometricField<Foam::Vector, Foam::fvPatchField, Foam::volMesh> const&) at ??:?

I want to confirm is whether the error is caused by the use of the beamdyn module.I checked the horizontalAxisWindTurbinesALMOpenFAST in the make/options .It contains the beamdyn library -laerodynlib \ -lbeamdynlib \ -lelastodynlib \ I look forward to hearing from you. Thank you very much