What would be interesting to have in the SDCard configuration

Tiagoeem commented 5 years ago

Describe i the comments what would be nice to have in the SDcard configuration, that may help in some sort of debug or test.

Tiagoeem commented 5 years ago

Option to change between patterns

Tiagoeem commented 5 years ago

@ericolucasm and @rodmarfran, which is the option/feature that you should configure in the RMAP Header in order make Lesia's parser SW work with the Simucam?

rodmarfran commented 5 years ago

@ericolucasm and @rodmarfran, which is the option/feature that you should configure in the RMAP Header in order make Lesia's parser SW work with the Simucam?

I don't know if the RMAP header needs to be changed. The Data Packet Protocol ID need to be changed between 0xF0 (Data Packet Protocol Identifier) ans 0x02 (CCSDS Protocol Identifier), for the LESIA software to collect the data and show in screen. The issue #11 was created for this purpose.

The data can be of the UINT8 type (allows for any Protocol ID) or of the BOOL type (only selectable between Data Packet Protocol Identifier and CCSDS Protocol Identifier).

rodmarfran commented 5 years ago

Change the Data Packet Logical Address from 0x50 (DPU Logical Address), for tests and debug. The issue #12 was created for this purpose.

The data need to be of the UINT8 type.

rodmarfran commented 5 years ago

Change the RMAP Logical Address from 0x51 (FEE Logical Address) and RMAP Key from 0xD1 (FEE Key), for tests and debug.

Both data need to be of the UINT8 type.

NSEE / SimuCam_Development_NFEE

What would be interesting to have in the SDCard configuration #10