Open erdoukki opened 3 years ago
[ 11.278496] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 11.306264] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
[ 17.913709] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xb1 error, result=0x1
[ 17.920969] mwifiex_pcie 0000:01:00.0: Failed to start the BSS
[ 17.927025] mwifiex_pcie 0000:01:00.0: Failed to start AP
[ 23.917702] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xb1 error, result=0x1
[ 23.925641] mwifiex_pcie 0000:01:00.0: Failed to start the BSS
[ 23.931672] mwifiex_pcie 0000:01:00.0: Failed to start AP
[ 29.942278] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xb1 error, result=0x1
[ 29.949971] mwifiex_pcie 0000:01:00.0: Failed to start the BSS
[ 29.956065] mwifiex_pcie 0000:01:00.0: Failed to start AP
root@ULTRA-5G:/# uname -ar
Linux ULTRA-5G 5.4.124 #0 SMP Sun Jun 13 22:02:19 2021 aarch64 GNU/Linux
dmesg / logread give :
Wed Aug 4 14:37:02 2021 kern.info kernel: [ 1440.569280] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
root@ULTRA-5G:~# iw dev
phy#0
Interface wlan0
ifindex 20
wdev 0x1
addr f0:ad:4e:10:0e:c3
type AP
txpower 0.00 dBm
[ 2395.300894] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 2453.187918] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 2489.210316] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
after a reboot, it may works...
It looks like only one client get access successfully...
I add two tweaks in my /etc/rc.local :
# WIFI FIXME
uci set wireless.radio0.legacy_rates='1'
uci commit
wifi
# WIFI FIXME
iw wlan0 set power_save off
But I still get problems... How can I help to analyse, report and fixes this !?
ping @sharvari-nxp
# WIFI FIXME uci set wireless.radio0.legacy_rates='1' uci commit wifi
This help to make the Access Point visible and available...
I have activated the optional verbose debug log on the wifi device : with option log_level '1'
Fri Aug 6 10:58:45 2021 daemon.notice hostapd: wlan0: interface state ACS->ENABLED
Fri Aug 6 10:58:45 2021 daemon.notice hostapd: wlan0: AP-ENABLED
Fri Aug 6 10:58:51 2021 kern.info kernel: [56066.999853] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xb1 error, result=0x1
Fri Aug 6 10:58:51 2021 kern.info kernel: [56067.007152] mwifiex_pcie 0000:01:00.0: Failed to start the BSS
Fri Aug 6 10:58:51 2021 kern.info kernel: [56067.013195] mwifiex_pcie 0000:01:00.0: Failed to start AP
Fri Aug 6 10:58:57 2021 kern.info kernel: [56073.028509] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xb1 error, result=0x1
Fri Aug 6 10:58:57 2021 kern.info kernel: [56073.037282] mwifiex_pcie 0000:01:00.0: Failed to start the BSS
Fri Aug 6 10:58:57 2021 kern.info kernel: [56073.043959] mwifiex_pcie 0000:01:00.0: Failed to start AP
with forcing legacy rates I get it up again :
Fri Aug 6 11:00:24 2021 daemon.notice netifd: Network device 'wlan0' link is up
Fri Aug 6 11:00:24 2021 daemon.notice hostapd: wlan0: interface state ACS->ENABLED
Fri Aug 6 11:00:24 2021 daemon.notice hostapd: wlan0: AP-ENABLED
Clients may still have issues, like Apples clients (iOS iPAD and iPhone) which get no access to the AP... With WPA or WPA2 I get errors and without encryption I get no IP...
I have add a /etc/modules.d/mwifiex file with the following content :
mwifiex reg_alpha2=FR
root@ULTRA-5G:~# dmesg |grep mwifiex_pcie
[ 8.709601] mwifiex_pcie: PCI memory map Virt0: 00000000a3db35c7 PCI memory map Virt2: 000000004005f488
[ 9.892557] mwifiex_pcie 0000:01:00.0: info: FW download over, size 638992 bytes
[ 10.733601] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 10.791178] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.10.p159)
[ 10.799895] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.10.p159)
[ 16.811868] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 29.661153] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 29.704430] mwifiex_pcie 0000:01:00.0: cannot change wiphy params when bss started
[ 30.128058] mwifiex_pcie 0000:01:00.0: cannot register network device
I have add a /etc/modules.d/mwifiex file with the following content :
removed... same !
root@ULTRA-5G:~# ethtool -i wlan0
driver: mwifiex_pcie
version:
firmware-version:
expansion-rom-version:
bus-info: 0000:01:00.0
supports-statistics: no
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no
I test it now also by removing wpad and replacing it by hostapd-openssl
I test it now also by removing wpad and replacing it by hostapd-openssl
with forcing legacy rates I get it up again :
# WIFI FIXME
uci set wireless.radio0.legacy_rates='1'
uci commit
wifi
# WIFI FIXME
iw wlan0 set power_save off
added in /etc/rc.local
now I have 4 clients on it... BUT only without encryption... If I enable WPA2 I get now only one client again, the others get faulty with dmesg error logged :
[ 63.388904] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x5e error, result=0x1
[ 63.396413] mwifiex_pcie 0000:01:00.0: crypto keys added
[ 64.764481] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x5e error, result=0x1
[ 64.771723] mwifiex_pcie 0000:01:00.0: crypto keys added
[ 66.169967] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x5e error, result=0x1
[ 66.177264] mwifiex_pcie 0000:01:00.0: crypto keys added
[ 70.810310] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x5e error, result=0x1
[ 70.817755] mwifiex_pcie 0000:01:00.0: crypto keys added
[ 75.478474] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x5e error, result=0x1
[ 75.485768] mwifiex_pcie 0000:01:00.0: crypto keys added
This commit has not the problem : https://github.com/NXP/mwifiex-firmware/blob/2a0a062e79b5fe9007e57c0fcd285e683e22373e/mrvl/pcieusb8997_combo_v4.bin
wget https://github.com/NXP/mwifiex-firmware/blob/2a0a062e79b5fe9007e57c0fcd285e683e22373e/mrvl/pcieusb8997_combo_v4.bin?raw=true -O /lib/firmware/mrvl/pcieusb8997_combo_v4.bin
reboot
still added wireless.radio0.legacy_rates='1'
root@ULTRA-5G:~# dmesg | grep mwifiex
[ 8.642706] mwifiex_pcie: PCI memory map Virt0: 000000009f690fa7 PCI memory map Virt2: 000000005f0cc217
[ 9.816137] mwifiex_pcie 0000:01:00.0: info: FW download over, size 634228 bytes
[ 10.662822] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 10.733597] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p195)
[ 10.742080] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.1.p195)
[ 17.831804] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 17.910362] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
[ 30.684304] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 30.749067] mwifiex_pcie 0000:01:00.0: cannot change wiphy params when bss started
[ 30.804154] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
[ 31.413758] mwifiex_pcie 0000:01:00.0: cannot register network device
No more crypto keys added error and multi clients on the AP are OK !
root@ULTRA-5G:~# iwinfo wlan1 info
wlan1 ESSID: "TRIBU"
Access Point: F0:AD:4E:10:0E:C3
Mode: Master Channel: 3 (2.422 GHz)
Center Channel 1: 3 2: unknown
Tx-Power: 15 dBm Link Quality: 47/70
Signal: -63 dBm Noise: -92 dBm
Bit Rate: 13.7 MBit/s
Encryption: WPA2 PSK (CCMP)
Type: nl80211 HW Mode(s): 802.11nac
Hardware: 1B4B:2B42 0000:0000 [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy1
[75068.549574] mwifiex_pcie 0000:01:00.0: mwifiex_cmd_timeout_func: Timeout cmd id = 0xb0, act = 0x1
[75068.558855] mwifiex_pcie 0000:01:00.0: num_data_h2c_failure = 0
[75068.565095] mwifiex_pcie 0000:01:00.0: num_cmd_h2c_failure = 0
[75068.571156] mwifiex_pcie 0000:01:00.0: is_cmd_timedout = 1
[75068.576825] mwifiex_pcie 0000:01:00.0: num_tx_timeout = 0
[75068.582421] mwifiex_pcie 0000:01:00.0: last_cmd_index = 2
[75068.588000] mwifiex_pcie 0000:01:00.0: last_cmd_id: 5e 00 28 00 b0 00 b0 00 28 00
[75068.595732] mwifiex_pcie 0000:01:00.0: last_cmd_act: 01 00 93 00 01 00 01 00 93 00
[75068.603549] mwifiex_pcie 0000:01:00.0: last_cmd_resp_index = 0
[75068.609573] mwifiex_pcie 0000:01:00.0: last_cmd_resp_id: 28 80 28 80 b0 80 28 80 5e 80
[75068.617739] mwifiex_pcie 0000:01:00.0: last_event_index = 2
[75068.623495] mwifiex_pcie 0000:01:00.0: last_event: 58 00 58 00 2e 00 58 00 58 00
[75068.631131] mwifiex_pcie 0000:01:00.0: data_sent=0 cmd_sent=1
[75068.637058] mwifiex_pcie 0000:01:00.0: ps_mode=0 ps_state=0
[75068.642875] mwifiex_pcie 0000:01:00.0: mwifiex_cfg80211_change_beacon: setting mgmt ies failed
[75068.644294] mwifiex_pcie 0000:01:00.0: ===mwifiex driverinfo dump start===
[75068.658893] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p195)
[75068.667442] mwifiex_pcie 0000:01:00.0: PCIE register dump start
[75068.673664] mwifiex_pcie 0000:01:00.0: pcie scratch register:
[75068.679650] mwifiex_pcie 0000:01:00.0: reg:0xcf0, value=0xfedcba00
[75068.679650] reg:0xcf8, value=0x2cf004f
[75068.679650] reg:0xcfc, value=0x1444400
[75068.679650]
[75068.695403] mwifiex_pcie 0000:01:00.0: PCIE register dump end
[75068.701570] mwifiex_pcie 0000:01:00.0: ===mwifiex driverinfo dump end===
[75068.708542] mwifiex_pcie 0000:01:00.0: == mwifiex firmware dump start ==
[75070.231652] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
...<REPEATED MESSAGE !!!>
[75076.140553] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.147088] device wlan1 left promiscuous mode
[75076.151948] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.158425] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.164956] br-lan: port 5(wlan1) entered disabled state
[75076.214180] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.244726] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.251406] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.257878] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.264426] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.270906] mwifiex_pcie 0000:01:00.0: Failed to delete mgmt IEs!
[75076.277192] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.283673] mwifiex_pcie 0000:01:00.0: Failed to stop the BSS
[75076.296785] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.313438] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.465364] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.635037] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.691620] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.783187] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.838125] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.902265] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.935103] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75076.984124] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75077.681523] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75077.703697] mwifiex_pcie 0000:01:00.0: cannot change wiphy params when bss started
[75077.718672] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75077.754913] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75077.951815] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75077.958295] mwifiex_pcie 0000:01:00.0: set mac address failed: ret=-1
[75077.965030] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75081.260379] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75081.412613] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75081.466307] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75081.585980] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75081.649712] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75081.722286] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75081.752879] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75081.793620] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75112.171061] mwifiex_pcie 0000:01:00.0: == mwifiex firmware dump end ==
[75112.180811] mwifiex_pcie 0000:01:00.0: == mwifiex dump information to /sys/class/devcoredump start
[75112.190429] mwifiex_pcie 0000:01:00.0: == mwifiex dump information to /sys/class/devcoredump end
[75112.199685] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[75112.206740] mwifiex_pcie 0000:01:00.0: info: shutdown mwifiex...
[75112.499259] mwifiex_pcie 0000:01:00.0: info: dnld wifi firmware from 177740 bytes
[75113.892508] mwifiex_pcie 0000:01:00.0: info: FW download over, size 634228 bytes
[75114.618970] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[75114.669483] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p195)
[75114.677955] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.1.p195)
[ 434.412893] mwifiex_pcie 0000:01:00.0: mwifiex_cmd_timeout_func: Timeout cmd id = 0x28, act = 0x93
[ 434.422232] mwifiex_pcie 0000:01:00.0: num_data_h2c_failure = 0
[ 434.428488] mwifiex_pcie 0000:01:00.0: num_cmd_h2c_failure = 0
[ 434.434624] mwifiex_pcie 0000:01:00.0: is_cmd_timedout = 1
[ 434.440335] mwifiex_pcie 0000:01:00.0: num_tx_timeout = 0
[ 434.445944] mwifiex_pcie 0000:01:00.0: last_cmd_index = 1
[ 434.451524] mwifiex_pcie 0000:01:00.0: last_cmd_id: 28 00 28 00 28 00 b0 00 5e 00
[ 434.459267] mwifiex_pcie 0000:01:00.0: last_cmd_act: 93 00 93 00 93 00 01 00 01 00
[ 434.467100] mwifiex_pcie 0000:01:00.0: last_cmd_resp_index = 0
[ 434.473138] mwifiex_pcie 0000:01:00.0: last_cmd_resp_id: 28 80 b1 80 28 80 b0 80 5e 80
[ 434.481315] mwifiex_pcie 0000:01:00.0: last_event_index = 2
[ 434.487090] mwifiex_pcie 0000:01:00.0: last_event: 2e 00 2c 00 2c 00 58 00 58 00
[ 434.494740] mwifiex_pcie 0000:01:00.0: data_sent=0 cmd_sent=1
[ 434.500667] mwifiex_pcie 0000:01:00.0: ps_mode=0 ps_state=0
[ 434.508398] mwifiex_pcie 0000:01:00.0: ===mwifiex driverinfo dump start===
[ 434.515599] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p195)
[ 434.524095] mwifiex_pcie 0000:01:00.0: PCIE register dump start
[ 434.530202] mwifiex_pcie 0000:01:00.0: pcie scratch register:
[ 434.536161] mwifiex_pcie 0000:01:00.0: reg:0xcf0, value=0xfedcba00
[ 434.536161] reg:0xcf8, value=0x224004f
[ 434.536161] reg:0xcfc, value=0x1b6b620
[ 434.536161]
[ 434.551775] mwifiex_pcie 0000:01:00.0: PCIE register dump end
[ 434.557805] mwifiex_pcie 0000:01:00.0: ===mwifiex driverinfo dump end===
[ 434.564728] mwifiex_pcie 0000:01:00.0: == mwifiex firmware dump start ==
[ 440.812993] mwifiex_pcie 0000:01:00.0: cmd_wait_q terminated: -110
[ 440.819535] mwifiex_pcie 0000:01:00.0: mwifiex_cfg80211_change_beacon: setting mgmt ies failed
Slow and very unstable !
Slow and very unstable !
[ 434.515599] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p195)
Crash at network restart !
Only reboot get the WiFi working, since network restart, and reboot required again !
I give a try to : MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p145) from https://github.com/NXP/mwifiex-firmware/blob/5446916b53de395245d89400dea566055ec4502c/mrvl/pcieusb8997_combo_v4.bin
[ 9.846954] mwifiex_pcie 0000:01:00.0: info: FW download over, size 631012 bytes
[ 10.692912] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 10.755992] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p145)
[ 10.764556] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.1.p145)
I give a try to : MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p145)
Network could now be restarted... Better results with this version for now ! Will test longer...
I give a try to : MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p145)
Still buggy :
[ 3048.066459] ------------[ cut here ]------------
[ 3048.071327] NETDEV WATCHDOG: wlan0 (mwifiex_pcie): transmit queue 1 timed out
[ 3048.079046] WARNING: CPU: 0 PID: 0 at 0xffffffc010639750
[ 3048.084559] Modules linked in: xt_connlimit pppoe ppp_async option nf_conncount iptable_nat cdc_mbim xt_state xt_nat xt_helper xt_conntrack xt_connmark xt_connbytes xt_REDIRECT xt_MASQUERADE xt_FLOWOFFLOAD xt_CT usb_wwan qmi_wwan pppox ppp_generic nf_nat nf_flow_table_hw nf_flow_table nf_conntrack mwifiex_pcie mwifiex ipt_REJECT cfg80211 cdc_ncm xt_time xt_tcpudp xt_tcpmss xt_statistic xt_recent xt_multiport xt_mark xt_mac xt_limit xt_length xt_hl xt_ecn xt_dscp xt_comment xt_TCPMSS xt_LOG xt_HL xt_DSCP xt_CLASSIFY usbserial usbnet slhc rtc_pcf8563 nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_raw iptable_mangle iptable_filter ipt_ECN ip_tables crc_ccitt compat cdc_wdm i2c_pxa xt_set ip_set_list_set ip_set_hash_netportnet ip_set_hash_netport ip_set_hash_netnet ip_set_hash_netiface ip_set_hash_net ip_set_hash_mac ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_hash_ipport ip_set_hash_ipmark ip_set_hash_ip ip_set_bitmap_port ip_set_bitmap_ipmac ip_set_bitmap_ip ip_set
[ 3048.085365] nfnetlink nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 zram zsmalloc mii gpio_button_hotplug
[ 3048.191007] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.137 #0
[ 3048.197237] Hardware name: Globalscale Marvell ESPRESSOBin Ultra Board (DT)
[ 3048.204468] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 3048.209446] pc : 0xffffffc010639750
[ 3048.213078] lr : 0xffffffc010639750
[ 3048.216705] sp : ffffffc010003dc0
[ 3048.220155] x29: ffffffc010003dc0 x28: ffffffc0109350c0
[ 3048.225685] x27: 0000000000000140 x26: 00000000ffffffff
[ 3048.231214] x25: 0000000000000000 x24: 0000000000000000
[ 3048.236742] x23: 0000000000000001 x22: ffffff803c89c800
[ 3048.242270] x21: ffffff803c89cc80 x20: ffffffc010936000
[ 3048.247798] x19: 0000000000000001 x18: 0000000000000000
[ 3048.253325] x17: 0000000000000000 x16: 0000000000000000
[ 3048.258851] x15: 0000000000000000 x14: ffffffc0109a2a12
[ 3048.264378] x13: 0000000000000000 x12: ffffffc0109a2000
[ 3048.269908] x11: ffffffc010946000 x10: 0000000000000010
[ 3048.275434] x9 : 0000000000000000 x8 : 756575712074696d
[ 3048.280961] x7 : 736e617274203a29 x6 : 0000000000000001
[ 3048.286487] x5 : 0000000000000000 x4 : 0000000000000000
[ 3048.292014] x3 : 0000000000000000 x2 : ffffff803fdcebd0
[ 3048.297539] x1 : ffffff803fdcc578 x0 : 0000000000000041
[ 3048.303066] Call trace:
[ 3048.305630] 0xffffffc010639750
[ 3048.308904] 0xffffffc01010cb08
[ 3048.312178] 0xffffffc01010cdf8
[ 3048.315451] 0xffffffc0100812d4
[ 3048.318724] 0xffffffc0100a5404
[ 3048.321996] 0xffffffc0100f2634
[ 3048.325268] 0xffffffc0100810ac
[ 3048.328540] 0xffffffc010082df0
[ 3048.331813] 0xffffffc0100864f0
[ 3048.335085] 0xffffffc0100d1ffc
[ 3048.338357] 0xffffffc0100d2180
[ 3048.341628] 0xffffffc01077eec8
[ 3048.344900] 0xffffffc0108c086c
[ 3048.348174] 0xffffffc0108c0d28
[ 3048.351449] ---[ end trace 1168348e711ed524 ]---
[ 3048.356613] mwifiex_pcie 0000:01:00.0: 4295242133 : Tx timeout(#1), bss_type-num = 1-0
[ 3054.546288] mwifiex_pcie 0000:01:00.0: 4295242752 : Tx timeout(#2), bss_type-num = 1-0
[ 3060.306044] mwifiex_pcie 0000:01:00.0: 4295243328 : Tx timeout(#3), bss_type-num = 1-0
[ 3066.065733] mwifiex_pcie 0000:01:00.0: 4295243904 : Tx timeout(#4), bss_type-num = 1-0
[ 3381.097672] mwifiex_pcie 0000:01:00.0: 4295275408 : Tx timeout(#1), bss_type-num = 1-0
[ 3391.097460] mwifiex_pcie 0000:01:00.0: 4295276408 : Tx timeout(#2), bss_type-num = 1-0
[ 3401.097404] mwifiex_pcie 0000:01:00.0: 4295277408 : Tx timeout(#3), bss_type-num = 1-0
[ 3411.097611] mwifiex_pcie 0000:01:00.0: 4295278408 : Tx timeout(#4), bss_type-num = 1-0
[ 3421.097061] mwifiex_pcie 0000:01:00.0: 4295279408 : Tx timeout(#5), bss_type-num = 1-0
[ 3616.054327] mwifiex_pcie 0000:01:00.0: 4295298904 : Tx timeout(#1), bss_type-num = 1-0
[ 3621.094253] mwifiex_pcie 0000:01:00.0: 4295299408 : Tx timeout(#2), bss_type-num = 1-0
[ 3631.094131] mwifiex_pcie 0000:01:00.0: 4295300408 : Tx timeout(#3), bss_type-num = 1-0
[ 3641.094082] mwifiex_pcie 0000:01:00.0: 4295301408 : Tx timeout(#4), bss_type-num = 1-0
[ 3651.094035] mwifiex_pcie 0000:01:00.0: 4295302408 : Tx timeout(#5), bss_type-num = 1-0
[ 3661.093977] mwifiex_pcie 0000:01:00.0: 4295303408 : Tx timeout(#6), bss_type-num = 1-0
[ 3821.093104] mwifiex_pcie 0000:01:00.0: 4295319408 : Tx timeout(#1), bss_type-num = 1-0
[ 3831.093062] mwifiex_pcie 0000:01:00.0: 4295320408 : Tx timeout(#2), bss_type-num = 1-0
[ 3841.092999] mwifiex_pcie 0000:01:00.0: 4295321408 : Tx timeout(#3), bss_type-num = 1-0
[ 3851.092853] mwifiex_pcie 0000:01:00.0: 4295322408 : Tx timeout(#4), bss_type-num = 1-0
[ 3861.092955] mwifiex_pcie 0000:01:00.0: 4295323408 : Tx timeout(#5), bss_type-num = 1-0
[ 3871.092876] mwifiex_pcie 0000:01:00.0: 4295324408 : Tx timeout(#6), bss_type-num = 1-0
[ 3881.092845] mwifiex_pcie 0000:01:00.0: 4295325408 : Tx timeout(#7), bss_type-num = 1-0
[ 3881.101189] mwifiex_pcie 0000:01:00.0: tx_timeout_cnt exceeds threshold. Triggering card reset!
[ 3881.123091] mwifiex: Have pending ack frames!
[ 3881.127618] mwifiex: Have pending ack frames!
[ 3881.132133] mwifiex: Have pending ack frames!
[ 3881.136674] mwifiex: Have pending ack frames!
[ 3881.141186] mwifiex: Have pending ack frames!
[ 3881.145712] mwifiex: Have pending ack frames!
[ 3881.150212] mwifiex: Have pending ack frames!
[ 3881.154734] mwifiex: Have pending ack frames!
[ 3881.159234] mwifiex: Have pending ack frames!
[ 3881.163741] mwifiex: Have pending ack frames!
[ 3881.168244] mwifiex: Have pending ack frames!
[ 3881.172747] mwifiex: Have pending ack frames!
[ 3881.177245] mwifiex: Have pending ack frames!
[ 3881.181883] mwifiex: Have pending ack frames!
[ 3881.186457] mwifiex: Have pending ack frames!
[ 3881.198336] mwifiex_pcie 0000:01:00.0: info: shutdown mwifiex...
[ 3881.204602] mwifiex: Have pending ack frames!
[ 3881.209098] mwifiex: Have pending ack frames!
[ 3881.213624] mwifiex: Have pending ack frames!
[ 3881.218117] mwifiex: Have pending ack frames!
[ 3881.222609] mwifiex: Have pending ack frames!
[ 3881.227558] mwifiex_pcie 0000:01:00.0: PREP_CMD: card is removed
[ 3881.233782] mwifiex_pcie 0000:01:00.0: Failed to delete mgmt IEs!
[ 3881.240068] mwifiex_pcie 0000:01:00.0: PREP_CMD: card is removed
[ 3881.246276] mwifiex_pcie 0000:01:00.0: Failed to stop the BSS
[ 3881.253680] br-lan: port 5(wlan0) entered disabled state
[ 3881.265873] device wlan0 left promiscuous mode
[ 3881.270484] br-lan: port 5(wlan0) entered disabled state
[ 3881.314089] mwifiex_pcie 0000:01:00.0: PREP_CMD: card is removed
[ 3881.320447] mwifiex_pcie 0000:01:00.0: PREP_CMD: card is removed
[ 3881.673173] mwifiex_pcie 0000:01:00.0: info: dnld wifi firmware from 174940 bytes
[ 3883.063810] mwifiex_pcie 0000:01:00.0: info: FW download over, size 631012 bytes
[ 3883.782802] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 3883.842146] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p145)
[ 3883.850682] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.1.p145)
[ 4077.794696] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 4077.823906] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
[ 4078.073527] br-lan: port 5(wlan1) entered blocking state
[ 4078.079042] br-lan: port 5(wlan1) entered disabled state
[ 4078.084936] device wlan1 entered promiscuous mode
best results get with the NXP firmware from here : https://github.com/NXP/imx-firmware/tree/master/nxp/FwImage_8997
@erdoukki Could you try to use firmware from the linux-firmware repository? https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/
@pali
Already done https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/mrvl?id=b7c134f0d3491113958276d631b4e69771a6c5be latest at https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/ refer to: WLAN (PCIE) firmware version: W16.68.10.p159
It was already tested and was buggy ! The only and more stable I have tested for now is the nxp Firmware version: W16.68.10.p16
I can do more test if you want…
Could you try older binaries from linux-firmware.git repository?
I'm asking because if you find some older stable version in linux-firmware.git history, it can be reverted. I'm not sure how many people test new versions and providing feedback for linux-firmware.git maintainers could really help.
Sure, I'll get some more tests on the linux-firmware history ! Will report.
I look to make a list of past firmwares from linux-firmare git...
I also verified the one used atually from NXP/imx-firmware and took some notes !
best results get with the NXP firmware from here : https://github.com/NXP/imx-firmware/tree/master/nxp/FwImage_8997
root@ULTRA-5G:~# wget https://github.com/NXP/imx-firmware/raw/master/nxp/FwImage_8997/pcieuart8997_combo_v4.bin -O /lib/firmware/mrvl/pcieusb8997_combo_v4.bin
May be a mistake, but my workaround may not work with Bluetooth !
root@ULTRA-5G:~# dmesg | grep wifi
[ 9.629598] mwifiex_pcie: PCI memory map Virt0: 0000000005a3499a PCI memory map Virt2: 000000004d4fe816
[ 10.675157] mwifiex_pcie 0000:01:00.0: info: FW download over, size 627620 bytes
[ 11.523802] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 11.581313] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.10.p16)
[ 11.589871] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.10.p16)
[ 17.988243] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 18.016874] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
[ 43.048214] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
root@ULTRA-5G:~# cat /etc/config/wireless
config wifi-device 'radio0'
option type 'mac80211'
option path 'soc/d0070000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
option htmode 'HT20'
option hwmode '11g'
option channel 'auto'
option log_level '1'
option cell_density '0'
option country 'FR'
option legacy_rates '1'
...
I then find an unresolved problems ! I have to rename the file... And may be the USB/Bluetooth, still untested, will bug !?
Open an issue at NXP/imx-firmware repository : https://github.com/NXP/imx-firmware/issues/2
There are seven versions of pcieusb8997_combo_v4.bin firmware in linux-firmware repository: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/log/mrvl/pcieusb8997_combo_v4.bin
Check which version is working and which not. Ideally which version / commit broke it.
The two last versions were already tested... But get some problems if I looking to my notes !
I will check again all the seven to test which ones works.
2021-07-16 linux-firmware: update NXP 8897/8997 firmware images20210716 Sharvari Harisangam 1 -0/+0
linux-firmware: update NXP 8897/8997 firmware images20210716
SDSD-8897:
WLAN (SDIO) firmware version: W15.68.19.p54
Bluetooth (SDIO) firmware version: 15.26.19.p54
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIEUSB-8997:
WLAN (PCIE) firmware version: W16.68.10.p159
Bluetooth (USB) firmware version: W16.26.10.p159
The combo image can be downloaded through WLAN only.
Signed-off-by: Rakesh Parmar <rakesh.parmar@nxp.com>
Signed-off-by: Sharvari Harisangam <sharvari.harisangam@nxp.com>
Signed-off-by: Josh Boyer <jwboyer@kernel.org>
2019-02-12 linux-firmware: update Marvell PCIe-USB8997 firmware image Ganapathi Bhat 1 -0/+0
linux-firmware: update Marvell PCIe-USB8997 firmware image
WLAN (PCIe) firmware version: W16.68.1.p195
Bluetooth (USB) firmware version: 16.26.1.p195
In PCIe-USB chipset, WLAN is over PCIe whereas bluetooth is over
USB. The combo image will be downloaded through WLAN only.
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
2018-01-16 linux-firmware: update Marvell PCIe-USB8897/8997 firmware image to add WPA2 v... Xinming Hu 1 -0/+0
linux-firmware: update Marvell PCIe-USB8897/8997 firmware image to add WPA2 vulnerability fix
PCIe/USB-8897:
WLAN (PCIe) firmware version: V15.68.7.p154
Bluetooth (USB) firmware version: 15.28.7.p154
The combo image will be downloaded through WLAN only.
'V' flag indicate the firmware image fix the WPA2
vulnerability issue.
PCIe/USB-8997:
WLAN (PCIe) firmware version: V16.68.1.p145
Bluetooth (USB) firmware version: 16.26.1.p145
The combo image will be downloaded through WLAN only.
'V' flag indicate the firmware image fix the WPA2
vulnerability issue.
Signed-off-by: Xinming Hu <huxm@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: James Cao <jcao@marvell.com>
2017-10-31 linux-firmware: update Marvell PCIe-USB8997 firmware image Ganapathi Bhat 1 -0/+0
linux-firmware: update Marvell PCIe-USB8997 firmware image
Firmware version for this image is 16.68.1.p140
In PCIe-USB chipset, WLAN is over PCIe whereas bluetooth is over
USB.
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: James Cao <jcao@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
2017-08-01 linux-firmware: update Marvell PCIe-USB8997 firmware image Ganapathi Bhat 1 -0/+0
linux-firmware: update Marvell PCIe-USB8997 firmware image
Firmware version for this image is 16.68.1.p133
In PCIe-USB chipset, WLAN is over PCIe whereas bluetooth is over
USB.
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
2017-02-20 linux-firmware: update Marvell PCIe-USB8997 firmware image Amitkumar Karwar 1 -0/+0
linux-firmware: update Marvell PCIe-USB8997 firmware image
Firmware version for this image is 16.68.1.p97
In PCIe-USB chipset, WLAN is over PCIe whereas bluetooth is over
USB.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
2016-09-12 linux-firmware: add Marvell PCIe8997 firmware images Amitkumar Karwar 1 -0/+0
linux-firmware: add Marvell PCIe8997 firmware images
Firmware version for these images is 16.68.1.p70
PCIe-USB and PCIe-UART are two variant of PCIe8997 chipset in which WLAN
is over PCIe whereas bluetooth can be over USB or UART bus.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Cathy Luo <cluo@marvell.com>
* W16.68.10.p159
root@ULTRA-5G:~# dmesg | grep wifi
[ 8.830319] mwifiex_pcie: PCI memory map Virt0: 000000009ee15f82 PCI memory map Virt2: 000000002d03ecb5
[ 10.014029] mwifiex_pcie 0000:01:00.0: info: FW download over, size 638992 bytes
[ 10.852904] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 10.921439] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.10.p159)
[ 10.930105] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.10.p159)
[ 17.203330] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 17.254578] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
[ 42.003874] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
Problem: only 1 client can access wifi AP !
[30621.850480] wlo1: authenticated
[30621.853426] wlo1: associate with f0:ad:4e:10:0e:c3 (try 1/3)
[30621.857296] wlo1: RX AssocResp from f0:ad:4e:10:0e:c3 (capab=0x431 status=0 aid=2)
[30621.859372] wlo1: associated
[30622.866529] wlo1: deauthenticated from f0:ad:4e:10:0e:c3 (Reason: 3=DEAUTH_LEAVING)
[30623.409278] wlo1: authenticate with f0:ad:4e:10:0e:c3
root@ULTRA-5G:~# dmesg
Sat Sep 25 17:17:58 2021 kern.info kernel: [ 623.289605] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x5e error, result=0x1
Sat Sep 25 17:17:58 2021 kern.info kernel: [ 623.296916] mwifiex_pcie 0000:01:00.0: crypto keys added
root@ULTRA-5G:~# dmesg | grep wifi
[ 8.936601] mwifiex_pcie: PCI memory map Virt0: 0000000094d3ece2 PCI memory map Virt2: 000000007a972d37
[ 10.080626] mwifiex_pcie 0000:01:00.0: info: FW download over, size 638992 bytes
[ 10.922970] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 10.984209] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.10.p159)
[ 10.992807] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.10.p159)
[ 18.969282] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 19.001999] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
[ 44.483426] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 102.986783] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x5e error, result=0x1
[ 102.994725] mwifiex_pcie 0000:01:00.0: crypto keys added
[ 103.950206] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xb5 error, result=0x1
[ 105.768934] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x5e error, result=0x1
[ 105.776304] mwifiex_pcie 0000:01:00.0: crypto keys added
[ 107.214448] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x5e error, result=0x1
[ 107.221783] mwifiex_pcie 0000:01:00.0: crypto keys added
[ 108.767586] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x5e error, result=0x1
[ 108.774865] mwifiex_pcie 0000:01:00.0: crypto keys added
[ 110.222929] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x5e error, result=0x1
[ 110.230283] mwifiex_pcie 0000:01:00.0: crypto keys added
[ 111.230652] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xb5 error, result=0x1
W16.68.1.p195
root@ULTRA-5G:~# dmesg | grep wifi
[ 9.226031] mwifiex_pcie: PCI memory map Virt0: 00000000722055c8 PCI memory map Virt2: 0000000003774465
[ 10.441357] mwifiex_pcie 0000:01:00.0: info: FW download over, size 634228 bytes
[ 11.282976] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 11.341402] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p195)
[ 11.350021] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.1.p195)
[ 19.118151] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 19.156338] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
Problem: only 1 client can access wifi AP !
root@ULTRA-5G:~# dmesg | grep wifi
[ 68.982841] mwifiex_pcie 0000:01:00.0: mwifiex_cmd_timeout_func: Timeout cmd id = 0xb0, act = 0x1
[ 68.992070] mwifiex_pcie 0000:01:00.0: num_data_h2c_failure = 0
[ 68.998282] mwifiex_pcie 0000:01:00.0: num_cmd_h2c_failure = 0
[ 69.004388] mwifiex_pcie 0000:01:00.0: is_cmd_timedout = 1
[ 69.010057] mwifiex_pcie 0000:01:00.0: num_tx_timeout = 0
[ 69.015692] mwifiex_pcie 0000:01:00.0: last_cmd_index = 3
[ 69.021285] mwifiex_pcie 0000:01:00.0: last_cmd_id: 5e 00 28 00 28 00 b0 00 b0 00
[ 69.029062] mwifiex_pcie 0000:01:00.0: last_cmd_act: 01 00 93 00 93 00 01 00 01 00
[ 69.036925] mwifiex_pcie 0000:01:00.0: last_cmd_resp_index = 2
[ 69.042981] mwifiex_pcie 0000:01:00.0: last_cmd_resp_id: 5e 80 28 80 28 80 28 80 b0 80
[ 69.051159] mwifiex_pcie 0000:01:00.0: last_event_index = 1
[ 69.056980] mwifiex_pcie 0000:01:00.0: last_event: 58 00 2e 00 58 00 58 00 58 00
[ 69.064652] mwifiex_pcie 0000:01:00.0: data_sent=0 cmd_sent=1
[ 69.070588] mwifiex_pcie 0000:01:00.0: ps_mode=1 ps_state=0
[ 69.076681] mwifiex_pcie 0000:01:00.0: mwifiex_cfg80211_change_beacon: setting mgmt ies failed
[ 69.077882] mwifiex_pcie 0000:01:00.0: ===mwifiex driverinfo dump start===
[ 69.092734] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p195)
[ 69.101244] mwifiex_pcie 0000:01:00.0: PCIE register dump start
[ 69.107398] mwifiex_pcie 0000:01:00.0: pcie scratch register:
[ 69.113379] mwifiex_pcie 0000:01:00.0: reg:0xcf0, value=0xfedcba00
[ 69.113379] reg:0xcf8, value=0x22f00f8
[ 69.113379] reg:0xcfc, value=0x1c9c900
[ 69.113379]
[ 69.129027] mwifiex_pcie 0000:01:00.0: PCIE register dump end
[ 69.135091] mwifiex_pcie 0000:01:00.0: ===mwifiex driverinfo dump end===
[ 69.142014] mwifiex_pcie 0000:01:00.0: == mwifiex firmware dump start ==
[ 111.707705] mwifiex_pcie 0000:01:00.0: == mwifiex firmware dump end ==
[ 111.717239] mwifiex_pcie 0000:01:00.0: == mwifiex dump information to /sys/class/devcoredump start
[ 111.726869] mwifiex_pcie 0000:01:00.0: == mwifiex dump information to /sys/class/devcoredump end
[ 111.736066] mwifiex_pcie 0000:01:00.0: PREP_CMD: FW is in bad state
[ 111.743106] mwifiex_pcie 0000:01:00.0: info: shutdown mwifiex...
[ 111.749765] mwifiex_pcie 0000:01:00.0: PREP_CMD: card is removed
[ 111.756146] mwifiex_pcie 0000:01:00.0: Failed to delete mgmt IEs!
[ 111.762490] mwifiex_pcie 0000:01:00.0: PREP_CMD: card is removed
[ 111.768815] mwifiex_pcie 0000:01:00.0: Failed to stop the BSS
V16.68.1.p145 ('V' flag indicate the firmware image fix the WPA2 vulnerability issue.)
root@ULTRA-5G:~# dmesg | grep wifi
[ 9.496391] mwifiex_pcie: PCI memory map Virt0: 00000000bd2a9cb2 PCI memory map Virt2: 000000006fcb6bbf
[ 10.651346] mwifiex_pcie 0000:01:00.0: info: FW download over, size 631012 bytes
[ 11.495627] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 11.553501] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p145)
[ 11.561964] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.1.p145)
[ 19.399508] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 19.432497] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
[ 46.339066] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
two clients : OK looks to work fine !
16.68.1.p140
root@ULTRA-5G:~# dmesg | grep wifi
[ 8.923516] mwifiex_pcie: PCI memory map Virt0: 0000000096d3b7c6 PCI memory map Virt2: 000000000fcae741
[ 10.091709] mwifiex_pcie 0000:01:00.0: info: FW download over, size 622532 bytes
[ 10.933277] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 10.996724] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p140)
[ 11.005299] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.1.p140)
[ 18.975739] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 19.005051] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
[ 44.923101] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
two clients : OK looks to work fine !
16.68.1.p133
root@ULTRA-5G:~# dmesg | grep wifi
[ 8.986976] mwifiex_pcie: PCI memory map Virt0: 000000004831567e PCI memory map Virt2: 0000000027b0c31e
[ 10.154634] mwifiex_pcie 0000:01:00.0: info: FW download over, size 620800 bytes
[ 10.993007] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 11.044965] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p133)
[ 11.053476] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.1.p133)
[ 18.708355] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 18.741340] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
[ 44.358715] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
two clients : OK looks to work fine !
16.68.1.p97
root@ULTRA-5G:~# dmesg | grep wifi
[ 8.807778] mwifiex_pcie: PCI memory map Virt0: 00000000cd449e21 PCI memory map Virt2: 0000000097a3ae41
[ 9.974986] mwifiex_pcie 0000:01:00.0: info: FW download over, size 597136 bytes
[ 10.702868] mwifiex_pcie 0000:01:00.0: WLAN FW is active
[ 10.764722] mwifiex_pcie 0000:01:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (16.68.1.p97)
[ 10.773164] mwifiex_pcie 0000:01:00.0: driver_version = mwifiex 1.0 (16.68.1.p97)
[ 18.761495] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
[ 18.798401] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0xd1 error, result=0x1
[ 44.430588] mwifiex_pcie 0000:01:00.0: CMD_RESP: cmd 0x20 error, result=0x1
two clients : OK looks to work fine !
16.68.1.p70
KO Not loading firmware
root@ULTRA-5G:~# dmesg | grep wifi
[ 8.823912] mwifiex_pcie: PCI memory map Virt0: 0000000065b7d8bd PCI memory map Virt2: 00000000fcc32dbc
[ 9.016220] mwifiex_pcie 0000:01:00.0: mwifiex_prog_fw_w_helper: Card failed to ACK download
[ 9.025042] mwifiex_pcie 0000:01:00.0: prog_fw failed ret=0xffffffff
[ 9.031610] mwifiex_pcie 0000:01:00.0: info: _mwifiex_fw_dpc: unregister device
[ 9.040320] mwifiex_pcie 0000:01:00.0: performing cancel_work_sync()...
[ 9.047282] mwifiex_pcie 0000:01:00.0: cancel_work_sync() done
Tests (quick tests) made only with ONE AP and TWO CLIENTS on the AP...
Config used : cat /etc/config/wireless
config wifi-device 'radio0'
option type 'mac80211'
option path 'soc/d0070000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
option htmode 'HT20'
option hwmode '11g'
option channel 'auto'
option log_level '1'
option cell_density '0'
option country 'FR'
option legacy_rates '1'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option ssid 'ACCESSPOINT'
option key 'PASSWORD'
option encryption 'psk2'
option skip_inactivity_poll '1'
@pali hope I forget nothing ! ;-)
[ 9.016220] mwifiex_pcie 0000:01:00.0: mwifiex_prog_fw_w_helper: Card failed to ACK download
Error message Card failed to ACK download
is here:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/wireless/marvell/mwifiex/pcie.c?h=v5.14#n2386
And is caused by loop retries, up the MAX_POLL_TRIES
= 100
tries.
MAX_POLL_TRIES
is defined here:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/wireless/marvell/mwifiex/fw.h?h=v5.14#n126
You could try to increase MAX_POLL_TRIES
if it helps (maybe firmware is slower). E.g. to very big value 1000000
.
Thanks for the information @pali ... I think this old 16.68.1.p70 firmware from 2016-09-12 may be forget !
V16.68.1.p145
I will test more with the V16.68.1.p145 ! latest which allow more than 1 clients...
Well, driver should work with any firmware version. Above MAX_POLL_TRIES
is used for lot of other actions. And if that retry count is small it could mean that also other commands could timeout / cause issues. So if changing retry count for older firmware version helps it could mean that driver needs more tweaks also for new firmware versions.
I get issue in old tests with V16.68.1.p145 : https://github.com/NXP/mwifiex-firmware/issues/1#issuecomment-895921503 Hope the BSOD where from other components !
Well, driver should work with any firmware version. Above
MAX_POLL_TRIES
is used for lot of other actions. And if that retry count is small it could mean that also other commands could timeout / cause issues. So if changing retry count for older firmware version helps it could mean that driver needs more tweaks also for new firmware versions.
Okay, but I have not compile the OpenWrt firmware I actually use on my ULTRA. I use only an official one 21.02.x ! If you want tests with the recommended value, I can do, but later. I have first to make a custom firmware.
You can also put this card into any other device (for which you can re-compile kernel easily).
- W16.68.10.p159 = KO
- W16.68.1.p195 = KO
- V16.68.1.p145 = OK
- 16.68.1.p140 = OK
- 16.68.1.p133 = OK
- 16.68.1.p97 = OK
- 16.68.1.p70 = KO
Perfect! So obviously problematic is version W16.68.1.p195.
Version W16.68.1.p195
of pcieusb8997_combo_v4.bin
was included into linux-firmware repository by this pull request:
https://lore.kernel.org/all/CA+5PVA5yQbjg3vaT7F8120B6ngLn7+sZC0OWt0KoUiQR9hS4FA@mail.gmail.com/
And latest version W16.68.10.p159
of pcieusb8997_combo_v4.bin
by this pull request:
https://lore.kernel.org/linux-firmware/CA+5PVA5on7+CRtEV7tThPxgucwt3W9i-tEXm4cgH-AmMB-Jrtg@mail.gmail.com/
Please send this test summary to linux-firmware@kernel.org
mailing list and to Josh Boyer (merged above pull requests to linux-firmware repository) and explain this issue. It is obviously critical usability error. Also add into copy all people from above two pull request emails, so they would be notified about this issue. Also add linux-wireless@vger.kernel.org
to copy so other developers would see this issue (you can browse archive to see that mwifiex is under active discussion). And add also me to the copy :)
Either responsible people will come up with patches (to firmware or to driver) OR firmware files in linux-fimware would be revered.
MVEBU - EspressoBin ULTRA wifi - BUGS with OpenWrt 21.02-RC https://github.com/NXP/mwifiex-firmware/commit/312ca028298317d2babb54080c056408cdb9448b
Can anyone help with this bug ? https://github.com/kaloz/mwlwifi/issues/397 https://forum.openwrt.org/t/openwrt-21-02-0-third-release-candidate/99363/32
EDIT: Hardware used for testing: EspressoBin-ULTRA from GlobalScaleTechnologies. Official Product: https://globalscaletechnologies.com/product/espressobin-ultra/ CNX review: https://www.cnx-software.com/2019/12/30/espressobin-ultra-gateway-features-5-gigabit-ethernet-ports-wifi-5-supports-4g-lte-cellular-connectivity/ Block Diagram: http://espressobin.net/wp-content/uploads/2020/05/ESPRESSOBin-Ultra-V1_-Block-diagram_.pdf
OS info (from OpenWrt 21.02.x):
EDIT: A summary of my tests here: https://github.com/NXP/mwifiex-firmware/issues/1#issuecomment-927145355
Tests (quick tests) made only with ONE AP and TWO CLIENTS on the AP...
Config used : cat /etc/config/wireless