I really need help with Nebra device as per below.
As per advance troubleshooter i have done all of the below.
External lights:
Amber Light - this is working perfectly fine.
Green Light - This light is not turning it on after typical one minutes. I have opened up nebra hotspot and checked everything, removed 2 usb and ram and daughterboard, cleaned all and put back on but no luck.
Nebra CM3 Daughterboard Lights: The one near the USB port is under some EMF tape, this should be a solid green once power is applied. This is working fine as its described.
The second near the jumpers is a blue LED, this one coming as red and solid. This is not turning as blue its red so can some one please explain me what does this mean?
Daughterboard Jumpers: JP3 - Power Jumper: this is not connected so it is on normal operational mode. JP4 - Onboard Flash Jumper: jumper is in normal position 1+2.
I really need help with Nebra device as per below.
As per advance troubleshooter i have done all of the below.
External lights:
Can someone please help me to sort this out.
Kind regards,
Originally posted by @Jayeshloveworld in https://github.com/NebraLtd/Helium-Guides/issues/167