LHR-Mode Problems with RTX 3070ti

[Bassmaker87]

I get unstable hashrates by using the Version 39.4 and 39.5 the GPU´s go into the LHR mode, NBminer drops down the LHR- speed about -0.1 and then the same again. 39.3 works perfect with 57MH/s ETH Hashrate.

Here a Picture about the issue

[sahimg]

Same issue with my 3070...

[Kali123411]

Same went back to 39.2, with 39.5 mining ETH even at -lhr 70 it get's lhr lock detected constantly and throttles down

[satsukiyatoshi]

same here get constant lhr lock with my 3070ti , but i switched to t-rex instead, get 4.2MH/s more with it compared to same gpu/mem/power consumtion setting compared to nbminer 39.2

//Edited MH/s results after full 24h tests//

[ButterMeWaffle]

3080ti also has this issue on the same versions, hash sits around 35 but still get lock issues. going back to older versions brings the hash rate back up to 72

[waseem852]

3080ti also has this issue on the same versions, hash sits around 35 but still get lock issues. going back to older versions brings the hash rate back up to 72

Can you tell us exactly which version you used to make this work? :-)

[ButterMeWaffle]

3080ti also has this issue on the same versions, hash sits around 35 but still get lock issues. going back to older versions brings the hash rate back up to 72

Can you tell us exactly which version you used to make this work? :-)

Should be 39.2

[sonicfelipemt]

I get unstable hashrates by using the Version 39.4 and 39.5 the GPU´s go into the LHR mode, NBminer drops down the LHR- speed about -0.1 and then the same again. 39.3 works perfect with 57MH/s ETH Hashrate.

Here a Picture about the issue

Check your GPU mem. Hynix has some problems. Samsung usually goes OK.

[Bassmaker87]

I get unstable hashrates by using the Version 39.4 and 39.5 the GPU´s go into the LHR mode, NBminer drops down the LHR- speed about -0.1 and then the same again. 39.3 works perfect with 57MH/s ETH Hashrate. Here a Picture about the issue

Check your GPU mem. Hynix has some problems. Samsung usually goes OK.

I have two different 3070ti one is a Gigabyte Eagle and the other is a Manli. This two Cards works with Micron Memory

Here my Overclock Settings: -Power Limit 71% -Core Clock -502 -memory clock +1600 -Fan Speed 100%

My Temperatures when they work: GPU 55-60°C MEM: 90-100°C

[satsukiyatoshi]

@Bassmaker87 Tried your setting but lhr keep locking. Asus TUF 3070ti

Here's my best mining settings Afterburner: +CC -502 +Power limit 71 +memory clock +2000 +Fan 100%

Temps: gpu : 54-58°C (both t-rex and nbminer) ram : 92°-100° (t-rex) // 92°-98° (nbminer (39.2, other version keep lhr lock and down even in mode 2))

Average mining (24h on idle computer) : T-rex defautl settings + LHR 5 = 62.2MH/s Eff/W = 315 Nbminer 39.2 + LHR 70 = 58MH/s Eff/W = 290

Realy hope that nbminer will solve the lhr lock feature, because the current mode1 is realy better for ram temps

[sonicfelipemt]

I get unstable hashrates by using the Version 39.4 and 39.5 the GPU´s go into the LHR mode, NBminer drops down the LHR- speed about -0.1 and then the same again. 39.3 works perfect with 57MH/s ETH Hashrate. Here a Picture about the issue

Check your GPU mem. Hynix has some problems. Samsung usually goes OK.

I have two different 3070ti one is a Gigabyte Eagle and the other is a Manli. This two Cards works with Micron Memory

Here my Overclock Settings: -Power Limit 71% -Core Clock -502 -memory clock +1600 -Fan Speed 100%

My Temperatures when they work: GPU 55-60°C MEM: 90-100°C

WOW! You're toasting that GPU's v-ram. Put the speed down to +1300 to 1400 at least. I also got 1 RTX 3070ti (Zotac Trinity) with Micron mem and I now get 52~55 mh/s, oscilating. My settings: -Core clock stuck @ 990Mhz (str8 line on the voltage curve editor [MSI Afterburner]). -mem +1100 -pwr @ 65% -temp limit 70°C -fan speed @ 75%

[satsukiyatoshi]

just optimised my computer case air flow and now here's my results :

+CC -502 +Power limit 71 +memory clock +2200 (with external tools as afterburner can't do it) +Fan 83%

Temps: gpu : 47-50°C (both t-rex and nbminer) ram : 88°-92° (t-rex) // 86°-90° (nbminer (39.2, other version keep lhr lock and down even in mode 2))

Average mining (24h on idle computer) : T-rex defautl settings + LHR 5 = 64MH/s Eff/W = 330 Nbminer 39.2 + LHR 70 = 59.5MH/s Eff/W = 300

[jcadena338]

New version doesn't work with 3080ti for me either, I am also experiencing the lhr lock issue, and I had to go back to 39.2.