search

NebuTech / NBMiner

GPU Miner for ETH, RVN, BEAM, CFX, ZIL, AE, ERGO
https://nbminer.com
3.18k stars 519 forks source link

ERGO LHR unlock for LHR v1 cards #492

Open solidcake420 opened 3 years ago

solidcake420 commented 3 years ago

I have a mix of 3060 v1 and 3060 v2 cards in my system and noticed, that the LHR unlock only works on the new LHR v2 models. Is it possible to enable this for LHR v1 cards as well?

sonicfelipemt commented 3 years ago

For 3060 V1 you need the HDMI to VGA adapter plugged in and 470.11 drivers, I think nothing else works. Even if it did, it doesn't makes sense to use, as the 3060 V1 gets FULL HASH RATE when using the adapter method. AND: check your memory manufacturer. Hynix ones aren't working properly with NBMiner. Samsung ones seem to works OK all the time.

solidcake420 commented 3 years ago

Not correct - LHR unlock works great on ETH with v1 cards, there is no reason it won't work with ERGO. I'm not able to use 470.11 driver as I've got a mix of LHR v1 and v2 cards and the new ones are not compatible with that driver.

sonicfelipemt commented 3 years ago

Not correct - LHR unlock works great on ETH with v1 cards, there is no reason it won't work with ERGO. I'm not able to use 470.11 driver as I've got a mix of LHR v1 and v2 cards and the new ones are not compatible with that driver.

-LHR unlocks 100% of V1? My Asus 3060 ROG Strix V1 didn't worked with this :(

devalian commented 3 years ago

i have a mix of 3060v1 and v2 in same rig. i mine ergo at full hash for both

solidcake420 commented 3 years ago

i have a mix of 3060v1 and v2 in same rig. i mine ergo at full hash for both

Can you share some details on how were you able to achieve this?

devalian commented 3 years ago

i have a mix of 3060v1 and v2 in same rig. i mine ergo at full hash for both

Can you share some details on how were you able to achieve this?

I run it in windows, with 466 driver. Have it run it with slightly different oc settings. I did core lock using afterburner to get full hash

solidcake420 commented 3 years ago

i have a mix of 3060v1 and v2 in same rig. i mine ergo at full hash for both

Can you share some details on how were you able to achieve this?

I run it in windows, with 466 driver. Have it run it with slightly different oc settings. I did core lock using afterburner to get full hash

Ok, thanks for that, I will try with the 466.XX driver then!