Miner reports way less accepted shares than on pool

[webcmrj]

Hi everyone.

Have anyone seen this happens before? On HiveOS NBMiner says 50 accepted total but on pool (tried more than one) its showing 250 accepted shares.

This is causing a real hashrate and real average hashrate to be a third of the reported hashrates on pool.

Any guesses? Thanks in advance people!

[webcmrj]

Here a visual explanation:

[webcmrj]

And the consequences are(different pool from original post but same results):

[pdieppa]

I'm not sure if this is the case but every time the miner restarts, the stats on HiveOs will reset. In your last graph, it shows two dips in reported hash rate making me wonder if the miner restated at some point.

[webcmrj]

You are right @pdieppa are those miner’s resets the reason for real x reported hashrate discrepancy here?

![Uploading 831081EA-12C1-49E8-9FB1-CB1025DA3547.jpeg…]()

[pdieppa]

There is always a small variation in the reported hash rate, but in your case the hash rate is dropping down to 0 which makes the think the miner or even the whole rig is restating. Check the stats for that rig in HiveOs and look at the power. This is one of my rigs and you can see the dips when I restated it.

[webcmrj]

@pdieppa the rig itself is not restarting...status on HiveOS is good...could the problem be something on the communication between miner and pool? Check this:

[webcmrj]

And lots of times on pool goes to ZERO as you could see on graphs

[pdieppa]

I'm not sure if the problem is the pool since Flexpool.io is pretty large. One sure way to check it is to point your rig to another pool and let it run for while to see that the hash rate is at the pool and at nbminer.

[GDMalyska]

Much Love );G

[webcmrj]

It was the LHR thing....I accidentally released 100% of power but it didn't reflect on the pool results. I was wrongly using lhr code on the latest drives of nvidia on Hive.

lhr-mode: 1 lhr: 100

This released full power for my 3060 LHR but unfortunatelly it decreases the real power to less than 20% on the pool. Maybe this can end pointing a new way to release full power for 3060 cards in a near future 🙏🏼

[GDMalyska]

Awesome great work tho all around guys I swear the best in the biz I care not high five no touch mad props to all

On Wed, Oct 13, 2021, 5:40 PM webcmrj @.***> wrote:

It was the LHR thing....I accidentally released 100% of power but it didn't reflect on the pool results. I was wrongly using lhr code on the latest drives of nvidia on Hive.

lhr-mode: 1 lhr: 100

This released full power for my 3060 LHR but unfortunatelly it decreases the real power to less than 20% on the pool. Maybe this can end pointing a new way to release full power for 3060 cards in a near future 🙏🏼

— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/NebuTech/NBMiner/issues/522#issuecomment-942741682, or unsubscribe https://github.com/notifications/unsubscribe-auth/AUGEAC7LIJ6M5EW5VPHJFJDUGX4DDANCNFSM5F45DHBA .