search

NebuTech / NBMiner

GPU Miner for ETH, RVN, BEAM, CFX, ZIL, AE, ERGO
https://nbminer.com
3.17k stars 516 forks source link

RTX 3070 FE - NVIDIA 496 & 497.09 DRIVERS #713

Open PsykoRider opened 2 years ago

PsykoRider commented 2 years ago

[18:01:12] ERROR - ethash #12 Share invalid. [DEVICE 0, #12] [18:01:12] INFO - ethash - #12 Share rejected: {"error":"Provided PoW solution is invalid!"}, 39 ms. [DEVICE 0, #12]

pdieppa commented 2 years ago

What are your OC settings? This could mean they are too aggressive.

PsykoRider commented 2 years ago

https://ibb.co/gyc0npH

PsykoRider commented 2 years ago

https://ibb.co/rFWs4w2

pdieppa commented 2 years ago

Try 1100 for the core instead of 795

PsykoRider commented 2 years ago

Try 1100 for the core instead of 795

I can reduce and increase the CC but it is not stable. Can I adjust and maintain the 1100 with msi afterburner?

pdieppa commented 2 years ago

Yes you can use Afterburner to adjust the core clock.

PsykoRider commented 2 years ago

Yes you can use Afterburner to adjust the core clock.

I think you have not understood. I ask if I can configure to keep the core clock constant at 1100MHz. And if possible, how do I have to do?

xrtw commented 2 years ago

lock core with msi afterburner

PsykoRider commented 2 years ago

lock core with msi afterburner

After searching and searching I managed to find how to do it. You have to use the curve editor. It is finally set correctly. It would have been more useful if you had told me to look for information related to the curve editor. Anyway, thanks for your interest in answering my questions. Cheers

xrtw commented 2 years ago

easier to do your own research instead discussing about how to...