Firewall section is repeated twice

[netapp-bcammett]

Page URL

https://docs.netapp.com/us-en/bluexp-cloud-volumes-ontap/reference-networking-gcp.html

Page title

Networking requirements for Cloud Volumes ONTAP in Google Cloud

Summary

The "Outbound internet access" section includes a definition of firewall rules that should be removed. Firewall rules are described in another section lower on the page.

This is the text that should be removed:

Firewall rules::
You don't need to create firewall rules because BlueXP does that for you. If you need to use your own, refer to the firewall rules listed below.
+
Note that two sets of firewall rules are required for an HA configuration:
+
* One set of rules for HA components in VPC-0. These rules enable data access to Cloud Volumes ONTAP. <<Firewall rules,Learn more>>.
* Another set of rules for HA components in VPC-1, VPC-2, and VPC-3. These rules are open for inbound & outbound communication between the HA components. <<Firewall rules,Learn more>>.

If you want to tier cold data to a Google Cloud Storage bucket, the subnet in which Cloud Volumes ONTAP resides must be configured for Private Google Access (if you're using an HA pair, this is the subnet in VPC-0). For instructions, refer to https://cloud.google.com/vpc/docs/configure-private-google-access[Google Cloud documentation: Configuring Private Google Access^].

For additional steps required to set up data tiering in BlueXP, see link:task-tiering.html[Tiering cold data to low-cost object storage].

Public issues must not contain sensitive information

• [X] This issue contains no sensitive information.

[netapp-manini]

Noted, @netapp-bcammett, will take this up in the next cycle of update.

[netapp-manini]

This is fixed at https://docs.netapp.com/us-en/bluexp-cloud-volumes-ontap/reference-networking-gcp.html.