"system ethernet switch" CLI is actually "system switch ethernet"

[andris-ntap]

Page: Install the Reference Configuration File (RCF)

Please scrub the 3132Q-V docs for the incorrect CLI string "system ethernet switch" Example: For ONTAP 9.8 and later, use the command system ethernet switch show -is-monitoring-enabled-operational true.

The correct CLI syntax is "system switch ethernet". Ref: https://docs.netapp.com/us-en/ontap-cli-98/system-switch-ethernet-show.html

2nd item on this page: There's misformatted text at the end of this bulleted list in Step 6.

When you check the output to verify you have the correct RCF, make sure that the following information is correct:

• The RCF banner
• The node and port settings
• Customizations The output varies according to your site configuration. Check the port settings and refer to the release notes for any changes specific to the RCF that you have installed.

The last bullet has munged text after it. It should probably look like:

• Customizations

The output varies according to your site configuration. Check the port settings and refer to the release notes for any changes specific to the RCF that you have installed.

[netapp-yvonneo]

@andris-ntap thanks for the feedback. I'll update the docs accordingly.

[netapp-yvonneo]

@andris-ntap, updates are live, see here: https://docs.netapp.com/us-en/ontap-systems-switches/switch-cisco-3132q-v/install-rcf-3132q-v.html. Thanks