On step 6, could we perhaps link this KB

[ericd-netapp]

Page URL

https://docs.netapp.com/us-en/ontap-systems-switches/switch-cisco-3132q-v/install-rcf-3132q-v.html

Page title

Install the Reference Configuration File (RCF)

Summary

During a switch upgrade of the RCF, if a customer is using the 1st 4, 10GB ports on this switch, these ports will be off when you reset the switch and apply the new RCF. (they are turned off by default)

We do give a warning generically at the bottom of step 6 with this statement:

"The output varies according to your site configuration. Check the port settings and refer to the release notes for any changes specific to the RCF that you have installed."

Is it possible we can link this KB as reminder of a common problem that happens when you forget to manual set this?

https://kb.netapp.com/onprem%2FSwitches%2FCisco%2F10GbE_ports_on_Cisco_3132Q_cluster_switch_do_not_come_online

Public issues must not contain sensitive information

• [X] This issue contains no sensitive information.

[netapp-yvonneo]

@ericd-netapp, thanks your feedback, I'll update the doc accordingly.

[netapp-yvonneo]

@ericd-netapp the updated document is available here: https://docs.netapp.com/us-en/ontap-systems-switches/switch-cisco-3132q-v/install-rcf-3132q-v.html#step-2-configure-and-verify-the-setup

Thanks for your feedback, closing this issue.