BES-53248 RCF upgrade process does not account for licensed ports

[ArronKlem]

Page URL

https://docs.netapp.com/us-en/ontap-systems-switches/switch-bes-53248/configure-install-rcf.html

Page title

Install the Reference Configuration File (RCF)

Summary

In the section "Step 2: Configure the Ports", it does not account for customers using any additionally licensed ports, just the base ports 0/1-0/16.

It doesn't account for any additional cluster ports outside that range, and it isn't listed as an "Example" of what the command may look like. It simply says to shut these ports 0/1-0/16 and continue.

Is it possible to either change this to ports 0/1-0/54 to account for any potential cluster port, or add steps to have customers verify if they are using any licensed ports?

Public issues must not contain sensitive information

• [X] This issue contains no sensitive information.

[netapp-yvonneo]

@ArronKlem thanks for your feedback. We'll review your request and update the documentation accordingly.

[netapp-yvonneo]

@ArronKlem thanks for your feedback. We have a new upgrade RCF procedure for the BES-53248 switch, see here: https://docs.netapp.com/us-en/ontap-systems-switches/switch-bes-53248/upgrade-rcf.html. Closing this issue.