Need to add bullet to move 6-1/6-2 sub-slot blank cartridges over to new NVRAM11 module

[andris-ntap]

Page: Retire node1

Field feedback is showing some confusion about what to do with the blank modules that go into 6-1 and 6-2. I'd like to add this 1st bullet in the list in this section (Stage 2) and the equivalent section in Stage 4 (for node 2).

You must install the AFF A900 or FAS9500 NVRAM and controller modules that you received for the upgrade on node1.

• Move all blank filler modules in slots 6-1 and 6-2 from the old NVRAM module to the new NVRAM module.
• Do NOT move the coredump device from the AFF A700 NVRAM module to the AFF A900 NVRAM module.
• Move all flash cache modules installed in the FAS9000 NVRAM module to the FAS9500 NVRAM module.

Similar addition in Stage 4.

[netapp-pcarriga]

@andris-ntap - Thanks for providing this feedback, tracking in BURT 1506458.

[netapp-pcarriga]

@andris-ntap The updates are now published on the following pages: Install the AFF A900 or FAS9500 NVRAM and controller modules on node1 Install the AFF A900 or FAS9500 NVRAM and controller modules on node2 Thanks again!