search

NextGenRF-Design-Inc / bytepipe_sdk

BytePipe Software Development Kit
Other
5 stars 5 forks source link

USB not accessible on latest version of bpLinux #23

Open cnr-penten opened 1 month ago

cnr-penten commented 1 month ago

Unable to detect USB devices on fresh build of the latest version of bpLinux.

2CG running on HDK.

Followed the steps in https://github.com/NextGenRF-Design-Inc/bytepipe_sdk/blob/main/src/petalinux/README.md to build the Linux image.

Basically:

  1. Clone latest bytepipe_sdk repo
  2. Build rflan/hdl
  3. Build petalinux
  4. Copy to properly formatted uSD card
  5. Boot up on HDK
  6. lsusb -v doesn't show any output

Output of boot below:

root@bpLinux:~# reboot

Broadcast message frV����ѕ��J́:�����"�ݹ�2�Ɂ�����сr=]�jj��(�*���u�э���������չ5J9%Q��U�������ɽ���͕́������ɕ������z*э�J���х�������I5�������5jR�root@bpLinux:~# Stopping haveged:

Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 679)
dropbear.
Stopping internet superserver: inetd.
Stopping syslogd/klogd: stopped syslogd (pid 690)
stopped klogd (pid 693)
done
Stopping tcf-agent: OK
Deconfiguring network interfaces... done.
Sending all processes the TERM signal...
logout
Sending all processes the KILL signal...
Unmounting remote filesystems...
Deactivating swap...
Unmounting local filesystems...
Rebooting... [  463.534172] reboot: Restarting system
Xilinx Zynq MP First Stage Boot Loader
Release 2021.1   Jun  6 2021  -  07:07:32
NOTICE:  ATF running on XCZU2CG/silicon v4/RTL5.1 at 0xfffea000
NOTICE:  BL31: v2.4(release):xlnx_rebase_v2.4_2021.1_update1
NOTICE:  BL31: Built : 08:27:07, Apr 28 2021

U-Boot 2021.01 (Jun 01 2021 - 11:54:06 +0000)

Board: Xilinx ZynqMP
DRAM:  2 GiB
usb dr_mode not found
PMUFW:  v1.1
EL Level:       EL2
Chip ID:        zu2cg
NAND:  0 MiB
MMC:   mmc@ff160000: 0, mmc@ff170000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment

In:    serial   
Out:   serial   
Err:   serial   
Bootmode: SD_MODE1
Reset reason:   SOFT
Net:
ZYNQ GEM: ff0e0000, mdio bus ff0e0000, phyaddr -1, interface rgmii-id
No ethernet found.

Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
2594 bytes read in 24 ms (105.5 KiB/s)
## Executing script at 20000000
Trying to load boot images from mmc1
21582336 bytes read in 1590 ms (12.9 MiB/s)
13154167 bytes read in 983 ms (12.8 MiB/s)
## Loading init Ramdisk from Legacy Image at 04000000 ...
   Image Name:   petalinux-image-minimal-zynqmp-g
   Created:      2011-04-05  23:00:00 UTC
   Image Type:   AArch64 Linux RAMDisk Image (uncompressed)
   Data Size:    13154103 Bytes = 12.5 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 00100000
   Booting using the fdt blob at 0x100000

ZYNQ GEM: ff0e0000, mdio bus ff0e0000, phyaddr -1, interface rgmii-id
   Loading Ramdisk to 7d088000, end 7dd13737 ... OK
   Loading Device Tree to 000000007d07b000, end 000000007d087e20 ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 5.10.0-xilinx-v2021.1 (oe-user@oe-host) (aarch64-xilinx-linux-gcc (GCC) 10.2.0, GNU ld (GNU Binutils) 2.35.1) #1 SMP Fri Jun 4 15:57:16 UTC 2021
[    0.000000] Machine model: xlnx,zynqmp
[    0.000000] earlycon: cdns0 at MMIO 0x00000000ff000000 (options '115200n8')
[    0.000000] printk: bootconsole [cdns0] enabled
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 256 MiB at 0x000000006d000000
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000000000-0x000000007fefffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x000000003dffffff]
[    0.000000]   node   0: [mem 0x000000003ff08000-0x000000003fffffff]
[    0.000000]   node   0: [mem 0x0000000041000000-0x000000007fefffff]
[    0.000000] Zeroed struct page in unavailable ranges: 256 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fefffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 22 pages/cpu s50968 r8192 d30952 u90112
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: ARM erratum 845719
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 503804
[    0.000000] Kernel command line:  earlycon console=ttyPS0,115200 clk_ignore_unused init_fatal_sh=1
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 1711044K/2047968K available (13952K kernel code, 980K rwdata, 3916K rodata, 2112K init, 588K bss, 74780K reserved, 262144K cma-reserved)
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU event tracing is enabled.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] random: get_random_bytes called from start_kernel+0x31c/0x524 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 99.99MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x171015c90f, max_idle_ns: 440795203080 ns
[    0.000004] sched_clock: 56 bits at 99MHz, resolution 10ns, wraps every 4398046511101ns
[    0.008361] Console: colour dummy device 80x25
[    0.012408] Calibrating delay loop (skipped), value calculated using timer frequency.. 199.99 BogoMIPS (lpj=399996)
[    0.022753] pid_max: default: 32768 minimum: 301
[    0.027518] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.034703] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.044112] rcu: Hierarchical SRCU implementation.
[    0.047551] EFI services will not be available.
[    0.051865] smp: Bringing up secondary CPUs ...
[    0.056734] Detected VIPT I-cache on CPU1
[    0.056806] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.056897] smp: Brought up 1 node, 2 CPUs
[    0.070759] SMP: Total of 2 processors activated.
[    0.075431] CPU features: detected: 32-bit EL0 Support
[    0.080534] CPU features: detected: CRC32 instructions
[    0.085682] CPU: All CPU(s) started at EL2
[    0.089717] alternatives: patching kernel code
[    0.095378] devtmpfs: initialized
[    0.102973] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.107106] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.123818] pinctrl core: initialized pinctrl subsystem
[    0.124635] DMI not present or invalid.
[    0.127587] NET: Registered protocol family 16
[    0.133460] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
[    0.138765] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.146575] audit: initializing netlink subsys (disabled)
[    0.151990] audit: type=2000 audit(0.108:1): state=initialized audit_enabled=0 res=1
[    0.159605] cpuidle: using governor menu
[    0.163557] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.170254] ASID allocator initialised with 65536 entries
[    0.175710] Serial: AMBA PL011 UART driver
[    0.204120] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.205178] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.211854] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.218503] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    1.365723] cryptd: max_cpu_qlen set to 1000
[    1.395391] DRBG: Continuing without Jitter RNG
[    1.474284] raid6: neonx8   gen()  1960 MB/s
[    1.542338] raid6: neonx8   xor()  1465 MB/s
[    1.610417] raid6: neonx4   gen()  2009 MB/s
[    1.678481] raid6: neonx4   xor()  1435 MB/s
[    1.746557] raid6: neonx2   gen()  1904 MB/s
[    1.814617] raid6: neonx2   xor()  1316 MB/s
[    1.882700] raid6: neonx1   gen()  1627 MB/s
[    1.950763] raid6: neonx1   xor()  1117 MB/s
[    2.018840] raid6: int64x8  gen()  1317 MB/s
[    2.086910] raid6: int64x8  xor()   706 MB/s
[    2.154991] raid6: int64x4  gen()  1467 MB/s
[    2.223057] raid6: int64x4  xor()   749 MB/s
[    2.291126] raid6: int64x2  gen()  1281 MB/s
[    2.359189] raid6: int64x2  xor()   687 MB/s
[    2.427281] raid6: int64x1  gen()   946 MB/s
[    2.495348] raid6: int64x1  xor()   474 MB/s
[    2.495391] raid6: using algorithm neonx4 gen() 2009 MB/s
[    2.499339] raid6: .... xor() 1435 MB/s, rmw enabled
[    2.504271] raid6: using neon recovery algorithm
[    2.509593] iommu: Default domain type: Translated
[    2.514020] SCSI subsystem initialized
[    2.517632] usbcore: registered new interface driver usbfs
[    2.522909] usbcore: registered new interface driver hub
[    2.528171] usbcore: registered new device driver usb
[    2.533232] mc: Linux media interface: v0.10
[    2.537423] videodev: Linux video capture interface: v2.00
[    2.542902] EDAC MC: Ver: 3.0.0
[    2.546541] zynqmp-ipi-mbox mailbox@ff990400: Registered ZynqMP IPI mbox with TX/RX channels.
[    2.554729] zynqmp-ipi-mbox mailbox@ff990600: Registered ZynqMP IPI mbox with TX/RX channels.
[    2.563061] FPGA manager framework
[    2.566445] Advanced Linux Sound Architecture Driver Initialized.
[    2.572781] Bluetooth: Core ver 2.22
[    2.575910] NET: Registered protocol family 31
[    2.580304] Bluetooth: HCI device and connection manager initialized
[    2.586624] Bluetooth: HCI socket layer initialized
[    2.591466] Bluetooth: L2CAP socket layer initialized
[    2.596489] Bluetooth: SCO socket layer initialized
[    2.601702] clocksource: Switched to clocksource arch_sys_counter
[    2.607567] VFS: Disk quotas dquot_6.6.0
[    2.611332] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.623035] NET: Registered protocol family 2
[    2.623577] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    2.630937] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.638900] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    2.646486] TCP: Hash tables configured (established 16384 bind 16384)
[    2.652656] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.659242] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.666435] NET: Registered protocol family 1
[    2.671082] RPC: Registered named UNIX socket transport module.
[    2.676507] RPC: Registered udp transport module.
[    2.681166] RPC: Registered tcp transport module.
[    2.685836] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.692945] PCI: CLS 0 bytes, default 64
[    2.696283] Trying to unpack rootfs image as initramfs...
[    3.365011] Freeing initrd memory: 12844K
[    3.450959] Initialise system trusted keyrings
[    3.451158] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    3.457081] NFS: Registering the id_resolver key type
[    3.461273] Key type id_resolver registered
[    3.465362] Key type id_legacy registered
[    3.469362] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.476033] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    3.522085] NET: Registered protocol family 38
[    3.522137] xor: measuring software checksum speed
[    3.530208]    8regs           :  2166 MB/sec
[    3.534091]    32regs          :  2565 MB/sec
[    3.538803]    arm64_neon      :  2182 MB/sec
[    3.538846] xor: using function: 32regs (2565 MB/sec)
[    3.543647] Key type asymmetric registered
[    3.547705] Asymmetric key parser 'x509' registered
[    3.552582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    3.559906] io scheduler mq-deadline registered
[    3.564399] io scheduler kyber registered
[    3.570916] ps_pcie_dma init()
[    3.600845] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.603131] Serial: AMBA driver
[    3.607627] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    3.616693] brd: module loaded
[    3.622643] loop: module loaded
[    3.623715] mtdoops: mtd device (mtddev=name/number) must be supplied
[    3.628377] libphy: Fixed MDIO Bus: probed
[    3.632185] tun: Universal TUN/TAP device driver, 1.6
[    3.635780] CAN device driver interface
[    3.640400] usbcore: registered new interface driver asix
[    3.644894] usbcore: registered new interface driver ax88179_178a
[    3.650893] usbcore: registered new interface driver cdc_ether
[    3.656686] usbcore: registered new interface driver net1080
[    3.662309] usbcore: registered new interface driver cdc_subset
[    3.668188] usbcore: registered new interface driver zaurus
[    3.673741] usbcore: registered new interface driver cdc_ncm
[    2.563061] FPGA manager framework
[    2.566445] Advanced Linux Sound Architecture Driver Initialized.
[    2.572781] Bluetooth: Core ver 2.22
[    2.575910] NET: Registered protocol family 31
[    2.580304] Bluetooth: HCI device and connection manager initialized
[    2.586624] Bluetooth: HCI socket layer initialized
[    2.591466] Bluetooth: L2CAP socket layer initialized
[    2.596489] Bluetooth: SCO socket layer initialized
[    2.601702] clocksource: Switched to clocksource arch_sys_counter
[    2.607567] VFS: Disk quotas dquot_6.6.0
[    2.611332] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.623035] NET: Registered protocol family 2
[    2.623577] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[    2.630937] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.638900] TCP bind hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    2.646486] TCP: Hash tables configured (established 16384 bind 16384)
[    2.652656] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.659242] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    2.666435] NET: Registered protocol family 1
[    2.671082] RPC: Registered named UNIX socket transport module.
[    2.676507] RPC: Registered udp transport module.
[    2.681166] RPC: Registered tcp transport module.
[    2.685836] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.692945] PCI: CLS 0 bytes, default 64
[    2.696283] Trying to unpack rootfs image as initramfs...
[    3.365011] Freeing initrd memory: 12844K
[    3.450959] Initialise system trusted keyrings
[    3.451158] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    3.457081] NFS: Registering the id_resolver key type
[    3.461273] Key type id_resolver registered
[    3.465362] Key type id_legacy registered
[    3.469362] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    3.476033] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    3.522085] NET: Registered protocol family 38
[    3.522137] xor: measuring software checksum speed
[    3.530208]    8regs           :  2166 MB/sec
[    3.534091]    32regs          :  2565 MB/sec
[    3.538803]    arm64_neon      :  2182 MB/sec
[    3.538846] xor: using function: 32regs (2565 MB/sec)
[    3.543647] Key type asymmetric registered
[    3.547705] Asymmetric key parser 'x509' registered
[    3.552582] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    3.559906] io scheduler mq-deadline registered
[    3.564399] io scheduler kyber registered
[    3.570916] ps_pcie_dma init()
[    3.600845] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.603131] Serial: AMBA driver
[    3.607627] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    3.616693] brd: module loaded
[    3.622643] loop: module loaded
[    3.623715] mtdoops: mtd device (mtddev=name/number) must be supplied
[    3.628377] libphy: Fixed MDIO Bus: probed
[    3.632185] tun: Universal TUN/TAP device driver, 1.6
[    3.635780] CAN device driver interface
[    3.640400] usbcore: registered new interface driver asix
[    3.644894] usbcore: registered new interface driver ax88179_178a
[    3.650893] usbcore: registered new interface driver cdc_ether
[    3.656686] usbcore: registered new interface driver net1080
[    3.662309] usbcore: registered new interface driver cdc_subset
[    3.668188] usbcore: registered new interface driver zaurus
[    3.673741] usbcore: registered new interface driver cdc_ncm
[    3.680489] usbcore: registered new interface driver uas
[    3.684647] usbcore: registered new interface driver usb-storage
[    3.691458] rtc_zynqmp ffa60000.rtc: registered as rtc0
[    3.695787] rtc_zynqmp ffa60000.rtc: setting system clock to 2105-06-09T13:10:11 UTC (4273996211)
[    3.704636] i2c /dev entries driver
[    3.709840] usbcore: registered new interface driver uvcvideo
[    3.713753] USB Video Class driver (1.1.1)
[    3.718411] Bluetooth: HCI UART driver ver 2.3
[    3.722234] Bluetooth: HCI UART protocol H4 registered
[    3.727333] Bluetooth: HCI UART protocol BCSP registered
[    3.732628] Bluetooth: HCI UART protocol LL registered
[    3.737713] Bluetooth: HCI UART protocol ATH3K registered
[    3.743093] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    3.749342] Bluetooth: HCI UART protocol Intel registered
[    3.754688] Bluetooth: HCI UART protocol QCA registered
[    3.759887] usbcore: registered new interface driver bcm203x
[    3.765509] usbcore: registered new interface driver bpa10x
[    3.771047] usbcore: registered new interface driver bfusb
[    3.776495] usbcore: registered new interface driver btusb
[    3.781957] usbcore: registered new interface driver ath3k
[    3.787469] EDAC MC: ECC not enabled
[    3.791086] EDAC DEVICE0: Giving out device to module zynqmp-ocm-edac controller zynqmp_ocm: DEV ff960000.memory-controller (INTERRUPT)
[    3.803501] sdhci: Secure Digital Host Controller Interface driver
[    3.809169] sdhci: Copyright(c) Pierre Ossman
[    3.813489] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.819505] ledtrig-cpu: registered to indicate activity on CPUs
[    3.825104] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    3.831532] zynqmp_firmware_probe Platform Management API v1.1
[    3.837279] zynqmp_firmware_probe Trustzone version v1.0
[    3.900934] alg: No test for xilinx-zynqmp-aes (zynqmp-aes)
[    3.901094] zynqmp_aes firmware:zynqmp-firmware:zynqmp-aes: AES Successfully Registered
[    3.909103] alg: No test for xilinx-keccak-384 (zynqmp-keccak-384)
[    3.915208] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa)
[    3.920768] usbcore: registered new interface driver usbhid
[    3.926067] usbhid: USB HID core driver
[    3.933202] ARM CCI_400_r1 PMU driver probed
[    3.933783] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
[    3.941064] usbcore: registered new interface driver snd-usb-audio
[    3.947681] pktgen: Packet Generator for packet performance testing. Version: 2.75
[    3.954953] Initializing XFRM netlink socket
[    3.958505] NET: Registered protocol family 10
[    3.963399] Segment Routing with IPv6
[    3.966660] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[    3.972817] NET: Registered protocol family 17
[    3.976761] NET: Registered protocol family 15
[    3.981171] can: controller area network core
[    3.985517] NET: Registered protocol family 29
[    3.989894] can: raw protocol
[    3.992825] can: broadcast manager protocol
[    3.996990] can: netlink gateway - max_hops=1
[    4.001425] Bluetooth: RFCOMM TTY layer initialized
[    4.006166] Bluetooth: RFCOMM socket layer initialized
[    4.011276] Bluetooth: RFCOMM ver 1.11
[    4.014990] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.020250] Bluetooth: BNEP filters: protocol multicast
[    4.025444] Bluetooth: BNEP socket layer initialized
[    4.030372] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.036254] Bluetooth: HIDP socket layer initialized
[    4.041354] 9pnet: Installing 9P2000 support
[    4.045453] Key type dns_resolver registered
[    4.049946] registered taskstats version 1
[    4.053735] Loading compiled-in X.509 certificates
[    4.060079] Btrfs loaded, crc32c=crc32c-generic
[    4.075596] ff000000.serial: ttyPS0 at MMIO 0xff000000 (irq = 46, base_baud = 6249999) is a xuartps
[    4.084639] printk: console [ttyPS0] enabled
[    4.084639] printk: console [ttyPS0] enabled
[    4.088950] printk: bootconsole [cdns0] disabled
[    4.088950] printk: bootconsole [cdns0] disabled
[    4.098680] ff010000.serial: ttyPS1 at MMIO 0xff010000 (irq = 47, base_baud = 6249999) is a xuartps
[    4.111868] of-fpga-region fpga-full: FPGA Region probed
[    4.118183] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[    4.125408] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[    4.132648] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[    4.139870] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[    4.147086] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[    4.154305] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[    4.161524] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[    4.168755] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[    4.176053] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
[    4.183274] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
[    4.190494] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
[    4.197720] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
[    4.204942] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
[    4.212163] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
[    4.219376] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
[    4.226596] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
[    4.234090] xilinx-zynqmp-dpdma fd4c0000.dma-controller: Xilinx DPDMA engine is probed
[    4.242301] xilinx-psgtr fd400000.phy: Invalid reference clock number 3
[    4.248920] zynqmp-display fd4a0000.display: failed to get PHY lane 0
[    4.255403] zynqmp-display: probe of fd4a0000.display failed with error -22
[    4.263100] macb ff0e0000.ethernet: Not enabling partial store and forward
[    4.270026] macb ff0e0000.ethernet: invalid hw address, using random
[    4.283375] libphy: MACB_mii_bus: probed
[    4.287376] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x50070106 at 0xff0e0000 irq 36 (f6:cd:74:72:a7:38)
[    4.297930] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
[    4.304593] xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM
[    4.311195] xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM
[    4.317810] xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM
[    4.345800] cdns-i2c ff030000.i2c: 400 kHz mmio ff030000 irq 38
[    4.352264] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer with timeout 60s
[    4.359824] cdns-wdt ff150000.watchdog: Xilinx Watchdog Timer with timeout 10s
[    4.367607] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 1099999989 (-34)
[    4.376360] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1099999 KHz, changing to: 1099989 KHz
[    4.387161] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP for freq 1099999989 (-34)
[    4.403187] of_cfs_init
[    4.405692] of_cfs_init: OK
[    4.408649] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.429731] mmc0: SDHCI controller on ff160000.mmc [ff160000.mmc] using ADMA 64-bit
[    4.429743] mmc1: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit
[    4.485333] mmc1: new high speed SDHC card at address aaaa
[    4.491463] mmcblk1: mmc1:aaaa SC16G 14.8 GiB
[    4.501605] mmc0: new HS200 MMC card at address 0001
[    4.501651]  mmcblk1: p1
[    4.510058] mmcblk0: mmc0:0001 W62704 3.53 GiB
[    4.514902] mmcblk0boot0: mmc0:0001 W62704 partition 1 2.00 MiB
[    4.525845] mmcblk0boot1: mmc0:0001 W62704 partition 2 2.00 MiB
[    4.531859] mmcblk0rpmb: mmc0:0001 W62704 partition 3 512 KiB, chardev (245:0)
[    4.540313]  mmcblk0: p1
[    4.592098] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.598642] clk: Not disabling unused clocks
[    4.603121] ALSA device list:
[    4.606081]   No soundcards found.
[    4.610058] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.618667] cfg80211: failed to load regulatory.db
[    4.624828] Freeing unused kernel memory: 2112K
[    4.641753] Run /init as init process
INIT: version 2.97 booting
[    4.731644] /dev/root: Can't open blockdev
Starting udev   
[    4.776694] udevd[251]: starting version 3.2.9
[    4.781777] random: udevd: uninitialized urandom read (16 bytes read)
[    4.788324] random: udevd: uninitialized urandom read (16 bytes read)
[    4.794818] random: udevd: uninitialized urandom read (16 bytes read)
[    4.807736] udevd[252]: starting eudev-3.2.9
[    4.966541] remoteproc remoteproc0: ff9a0000.rf5ss:r5f_0 is available
[    5.051551] random: fast init done
[    5.286692] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.296824] vfat filesystem being mounted at /media/sd-mmcblk0p1 supports timestamps until 2107 (0x10391447e)
[    5.501892] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[    5.511993] vfat filesystem being mounted at /media/sd-mmcblk1p1 supports timestamps until 2107 (0x10391447e)
[    5.999335] urandom_read: 6 callbacks suppressed
[    5.999344] random: dd: uninitialized urandom read (512 bytes read)
[    6.154183] macb ff0e0000.ethernet eth0: PHY [ff0e0000.ethernet-ffffffff:09] driver [Generic PHY] (irq=POLL)
[    6.164060] macb ff0e0000.ethernet eth0: configuring for phy/rgmii-id link mode
[   16.207994] random: crng init done
Starting tcf-agent: OK

root@bpLinux:~# lsusb -v
root@bpLinux:~#
arexngr23 commented 1 week ago

What is the OS name and version that you used to build bpLinux ? Also, could you share the bpLinux image files your build produced?

cnr-penten commented 1 week ago

This was built on Ubuntu 18.04 with Vivado / Vitis 2021.1

I'm out of the country right now and don't have access to my build machine. Will upload when I have access again.

Thanks for looking into it

arexngr23 commented 4 days ago

system-user.zip

Could you try replacing your system-user.dtsi with the one inside this zip file? It worked for me.

The file uploader tool didn't find the .dtsi extension so I zipped it