search

NightscoutFoundation / xDrip

Nightscout version of xDrip+
https://jamorham.github.io/#xdrip-plus
GNU General Public License v3.0
1.4k stars 1.15k forks source link

Contour plus one - measuring glucose over Bluetooth #1076

Closed mustang011 closed 3 years ago

mustang011 commented 5 years ago

The Contour plus one meter does not connect to Bluetooth with xdrip when measuring blood. Data from the meter is imported only when pairing the device. The signal for measuring sugar and taking the measurement from the meter works only immediately after pairing the device. The next day, xdrip no longer connects to xdrip. You need to pair the meter again.

mk886714 commented 5 years ago

I use a accucheck aviva connect that worked in the beginning without any problems. after a xdrip update it is the same, after pairing works, after 1h must be paired again. I think it's the bluetooth settings of xdrip

mk886714 commented 5 years ago

I have not looked for the cause, because I only need BG to calibrate for the cgm

mustang011 commented 5 years ago

I use nightscout as an electronic diabetes diary and show these results to a doctor. The doctor looks at statistics, how many percent of time I am in a good range of sugars.

The more often I calibrate the sensor (I have FreeStyle Libre), the xdrip shows results closer to those of a blood test. The sensor still shows large discrepancies for other ranges (differently for 50 mg / dl, 120mg / dl, 180mg / dl, 250 mg / dl). I calibrate / measure sugar with a glucometer 3-4 times a day. When I feel weak, I increase the number of blood measurements to 6-11 times a day.

Navid200 commented 3 years ago

@mustang011 Would you please close this issue if your questions have been answered. If not, you can try the facebook group or the Gitter room. https://www.facebook.com/groups/xDripG5 https://gitter.im/jamorham/xDrip-plus

mustang011 commented 3 years ago

Ok.