search

NightscoutFoundation / xDrip

Nightscout version of xDrip+
https://jamorham.github.io/#xdrip-plus
GNU General Public License v3.0
1.41k stars 1.15k forks source link

xDrip does not recognise new G7 sensor, despite correct code, and it working on Tandem T-slim pump #3688

Closed shrewsdog closed 1 month ago

shrewsdog commented 1 month ago

Discussed in https://github.com/NightscoutFoundation/xDrip/discussions/3687

Originally posted by **shrewsdog** September 28, 2024 Issue is xDrip not recognising a new sensor (which is working on Tandem T-Slim pump). System Status has correct TX ID for new sensor, but transmitter days and battery voltages are clearly for the old transmitter as days are 10, and voltage a 280 and b 176. Data source is shown as G6/G7/1/1+ Transmitter, and xDrip version is dfcbe80-20240917. Phone is Motorola Moto g(6) Play. Catalogue of errors by me. Had G7 on day nine. Had been erratic, so inserted new one early. Then realised I needed to stop the first one. Used stop sensor which stopped both (at this point I believed I had not paired sensor 2). Then removed the 2 sensor TXs from bluetooth list on my phone and rebooted. Inserted sensor 3, paired it with pump which is receiving data correctly. New TX ID on phone is correct, but the status page is showing the old day nine sensor and battery data, and the main page records sensor error and 'Ends 7.48' tomorrow. I opted to put an incorrect TX ID in Xdrip, allowed it to try to connect, and when it failed reinputted the correct TX, but no change. Both the expiring sensor and its replacement have been sat in microwave for hours. Applicator code for new sensor is correct. It is as though the tx data for the first sensor is 'locked' on the phone.
Navid200 commented 1 month ago

I think I asked you to bring this to GitHub. If yes, thanks for doing it. But, I didn't ask you to convert it to an issue. Please let it be a discussion. If it turns out that needs to be converted to an issue, it will be.

shrewsdog commented 1 month ago

Apologies - I was not sure what I needed to do.

Screenshot attached. After the 'notional' expiry of the original sensor this morning, I changed the tx id, and it returned the expected mismatch message. I then restarted my phone, re-entered the correct code, and the main screen reports "G7 State isn't currently known. Next connection will update this", but the attached shows otherwise.

From: Navid @.> Sent: 28 September 2024 11:55 To: NightscoutFoundation/xDrip @.> Cc: shrewsdog @.>; Author @.> Subject: Re: [NightscoutFoundation/xDrip] xDrip does not recognise new G7 sensor, despite correct code, and it working on Tandem T-slim pump (Issue

3688)

I think I asked you to bring this to GitHub. If yes, thanks for doing it. But, I didn't ask you to convert it to an issue. Please let it be a discussion. If it turns out that needs to be converted to an issue, it will be.

- Reply to this email directly, view it on GitHub https://github.com/NightscoutFoundation/xDrip/issues/3688#issuecomment-2380 601531 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AKHL5S6C3JQEIID43BYYNXLZY 2DHDAVCNFSM6AAAAABPAMRY5WVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGOBQGYYDC NJTGE . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AKHL5SZ2II77HPZW54OCQI3ZY2DHDA5CNFS M6AAAAABPAMRY5WWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTU N4UMLW.gif Message ID: < @.> @.>