Document best way to use xDrip+ with Tizen

[jamorham]

I don't know anything about this. What is the best way to get xDrip+ data displayed on Tizen watches?

Feel free to add to this issue with any documentation and I will incorporate it to the WatchGuide.md file.

[JayType1]

Hi

Perhaps from previous attempts?

Ill try deleting all and start again?

---

From: Mr-Enigma notifications@github.com Sent: Monday, May 13, 2019 1:13:07 PM To: NightscoutFoundation/xDrip Cc: JayType1; Comment Subject: Re: [NightscoutFoundation/xDrip] Document best way to use xDrip+ with Tizen (#460)

huh that is a odd one, could i see the inside of your tasks? and the expressions on watchmaker?

not sure where it is pulling %NTITLE from.

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/NightscoutFoundation/xDrip/issues/460?email_source=notifications&email_token=AMBWKMN5RQBKWOP45YRC5VTPVFLNHA5CNFSM4FCP2342YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVIDXRA#issuecomment-491797444, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMBWKMK54JTG7PUWJ4X2KT3PVFLNHANCNFSM4FCP234Q.

[Mr-Enigma]

Ah, yeah it could be a issue with a previous attempt then, let me know how you get on :)

[JayType1]

Will Do Thanks

---

From: Mr-Enigma notifications@github.com Sent: Monday, May 13, 2019 1:17:34 PM To: NightscoutFoundation/xDrip Cc: JayType1; Comment Subject: Re: [NightscoutFoundation/xDrip] Document best way to use xDrip+ with Tizen (#460)

Ah, yeah it could be a issue with a previous attempt then, let me know how you get on :)

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/NightscoutFoundation/xDrip/issues/460?email_source=notifications&email_token=AMBWKMMK3YWVJNUUEAMS3B3PVFL55A5CNFSM4FCP2342YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVIEBBQ#issuecomment-491798662, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMBWKMMW3U25PIBAYVQEDCTPVFL55ANCNFSM4FCP234Q.

[JayType1]

If I just delete the profile and clean data that should suffice right?

Jay

---

From: Jai Sav jay.savaniisca@gmail.com Sent: Monday, May 13, 2019 1:19:58 PM To: NightscoutFoundation/xDrip; NightscoutFoundation/xDrip Cc: Comment Subject: Re: [NightscoutFoundation/xDrip] Document best way to use xDrip+ with Tizen (#460)

Will Do Thanks

---

From: Mr-Enigma notifications@github.com Sent: Monday, May 13, 2019 1:17:34 PM To: NightscoutFoundation/xDrip Cc: JayType1; Comment Subject: Re: [NightscoutFoundation/xDrip] Document best way to use xDrip+ with Tizen (#460)

Ah, yeah it could be a issue with a previous attempt then, let me know how you get on :)

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/NightscoutFoundation/xDrip/issues/460?email_source=notifications&email_token=AMBWKMMK3YWVJNUUEAMS3B3PVFL55A5CNFSM4FCP2342YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVIEBBQ#issuecomment-491798662, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMBWKMMW3U25PIBAYVQEDCTPVFL55ANCNFSM4FCP234Q.

[Mr-Enigma]

delete the profile, then the tasks then variables, unfortunately its a bit of effort to delete something in Tasker heh

[JayType1]

Thanks done it

Will redo and report back

---

From: Mr-Enigma notifications@github.com Sent: Monday, May 13, 2019 1:23:19 PM To: NightscoutFoundation/xDrip Cc: JayType1; Comment Subject: Re: [NightscoutFoundation/xDrip] Document best way to use xDrip+ with Tizen (#460)

delete the profile, then the tasks then variables, unfortunately its a bit of effort to delete something in Tasker heh

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/NightscoutFoundation/xDrip/issues/460?email_source=notifications&email_token=AMBWKMJDB7R6D7MDAU2IFFLPVFMTPA5CNFSM4FCP2342YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVIEORQ#issuecomment-491800390, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMBWKMNHDDLL53RLNOQNJ6DPVFMTPANCNFSM4FCP234Q.

[JayType1]

Just re done it all and the same issue

%NTITLE 07.59 stuck there

could it be I imported arty-name profile setting but didn't work

I deleted all but perhaps imported data remains ?

the tasker is functioning perfect

Jay

[Mr-Enigma]

Yeah thats very strange, go ahead and screenshot the profile, and inside the var task. il look it over

[Mr-Enigma]

i have made the Tasker share link that will import straight into Tasker.

https://taskernet.com/shares/?user=AS35m8mcRKL9vYfQfEwRMAUTzig3ksELB0L%2B7jVYBjkl%2Fzdy9QM6q1Cfbgc2sj8ceEMuS9Y%3D&id=Profile%3Anotification

that should create the notification profile, var task and variables automatically.

[JayType1]

[Image]

[Image]

[Image]

[Image]

I deleted my settings and imported yours and below are screenshots From: Mr-Enigma notifications@github.com Sent: Monday, May 13, 2019 1:36:41 PM To: NightscoutFoundation/xDrip Cc: JayType1; Comment Subject: Re: [NightscoutFoundation/xDrip] Document best way to use xDrip+ with Tizen (#460)

i have made the Tasker share link that will import straight into Tasker. https://taskernet.com/shares/?user=AS35m8mcRKL9vYfQfEwRMAUTzig3ksELB0L%2B7jVYBjkl%2Fzdy9QM6q1Cfbgc2sj8ceEMuS9Y%3D&id=Profile%3Anotification that should create the notification profile, var task and variables automatically. — You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/NightscoutFoundation/xDrip/issues/460?email_source=notifications&email_token=AMBWKMNJ5MHIRNUO2GW5SHLPVFVGTA5CNFSM4FCP2342YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVIKRAQ#issuecomment-491825282, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMBWKMJJX4V6HRV5HNELZZ3PVFVGTANCNFSM4FCP234Q. [Image]

[JayType1]

[Image]

Success with your settings

Once again thank you

---

From: Jai Sav jay.savaniisca@gmail.com Sent: Monday, May 13, 2019 2:53:42 PM To: NightscoutFoundation/xDrip; NightscoutFoundation/xDrip Cc: Comment Subject: Re: [NightscoutFoundation/xDrip] Document best way to use xDrip+ with Tizen (#460)

[Image]

[Image]

[Image]

[Image]

I deleted my settings and imported yours and below are screenshots From: Mr-Enigma notifications@github.com Sent: Monday, May 13, 2019 1:36:41 PM To: NightscoutFoundation/xDrip Cc: JayType1; Comment Subject: Re: [NightscoutFoundation/xDrip] Document best way to use xDrip+ with Tizen (#460)

i have made the Tasker share link that will import straight into Tasker. https://taskernet.com/shares/?user=AS35m8mcRKL9vYfQfEwRMAUTzig3ksELB0L%2B7jVYBjkl%2Fzdy9QM6q1Cfbgc2sj8ceEMuS9Y%3D&id=Profile%3Anotification that should create the notification profile, var task and variables automatically. — You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/NightscoutFoundation/xDrip/issues/460?email_source=notifications&email_token=AMBWKMNJ5MHIRNUO2GW5SHLPVFVGTA5CNFSM4FCP2342YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVIKRAQ#issuecomment-491825282, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMBWKMJJX4V6HRV5HNELZZ3PVFVGTANCNFSM4FCP234Q. [Image]

[Mr-Enigma]

i dont see the images unfortunately but im glad its working now :)

[Mr-Enigma]

i have uploaded my current watch file, this is as below and will have the expressions needed for the Tasker Command. opening this file should import the face into WatchMaker

file: https://www.dropbox.com/sh/74stjd0xr3415oa/AADqzitDVQCSoD1rnIdjlOaaa?dl=0

screenshot:

[JayType1]

[Image]

[Image]

[Image]

---

From: Mr-Enigma notifications@github.com Sent: Monday, May 13, 2019 2:58:06 PM To: NightscoutFoundation/xDrip Cc: JayType1; Comment Subject: Re: [NightscoutFoundation/xDrip] Document best way to use xDrip+ with Tizen (#460)

i dont see the images unfortunately but im glad its working now :)

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/NightscoutFoundation/xDrip/issues/460?email_source=notifications&email_token=AMBWKMJAFH3HJLCWEMFFZP3PVFXW5A5CNFSM4FCP2342YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVIMRQA#issuecomment-491833536, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMBWKMOV72SJITY5KUFGBIDPVFXW5ANCNFSM4FCP234Q.

[JayType1]

[Image]

[Image]

[Image]

These are my settings

---

From: Jai Sav jay.savaniisca@gmail.com Sent: Monday, May 13, 2019 3:02:55 PM To: NightscoutFoundation/xDrip; NightscoutFoundation/xDrip Cc: Comment Subject: Re: [NightscoutFoundation/xDrip] Document best way to use xDrip+ with Tizen (#460)

[Image]

[Image]

[Image]

---

From: Mr-Enigma notifications@github.com Sent: Monday, May 13, 2019 2:58:06 PM To: NightscoutFoundation/xDrip Cc: JayType1; Comment Subject: Re: [NightscoutFoundation/xDrip] Document best way to use xDrip+ with Tizen (#460)

i dont see the images unfortunately but im glad its working now :)

— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/NightscoutFoundation/xDrip/issues/460?email_source=notifications&email_token=AMBWKMJAFH3HJLCWEMFFZP3PVFXW5A5CNFSM4FCP2342YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVIMRQA#issuecomment-491833536, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AMBWKMOV72SJITY5KUFGBIDPVFXW5ANCNFSM4FCP234Q.

[Mr-Enigma]

still cant see the images, might just be me heh

[JayType1]

Huh Ive checked on laptop and their not showing either

jay

[JayType1]

Ill try upload through laptop

[JayType1]

hopefully will work now

[Mr-Enigma]

yep that all looks good, should work fine :)

[JayType1]

Yes Should but only worked after importing your profile. Im not tech savvy to understand the errors I made lol

Jay

On Mon, 13 May 2019, 15:45 Mr-Enigma, notifications@github.com wrote:

yep that all looks good, should work fine :)

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/NightscoutFoundation/xDrip/issues/460?email_source=notifications&email_token=AMBWKMLEVMG5U6HWHZRAS43PVF5H5A5CNFSM4FCP2342YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVIRG5Q#issuecomment-491852662, or mute the thread https://github.com/notifications/unsubscribe-auth/AMBWKMPLARSKE77UXKI3JDTPVF5H5ANCNFSM4FCP234Q .

[Mr-Enigma]

it was mostly likely a bug because you imported the other profile, i would not worry about it.

[Robkeano]

Yes Ive now set up Xdrip on my Galaxy watch with no issues. I always have connection now as well. Been running for two weeks and looks great with original graph. The solution came from this group chat from Artys guidance and others.

I couldnt find wearable widgets with watchface anymore on samsung store and used the wearable widget straight ap. The problems I was having was connection. Now resolved by

1. turning off trust auto connect in bluetooth settings in Xdrip.
2. On S9 uploading latest security patch in May
3. Turn off Adaptive Battery In Settings > device care > battery > triple dots top right of phone > settings > switch off > adaptive battery.
4. plus set Battery to optimised or Full performance.

Now have no connection problems and looks great and has graph making fully functional.

So dont see a need to go down tasker way. Unless something similar comes out of playing with it as wearable widgets not updated anymore and could start to have problems in the future.

Rob

On Sun, 12 May 2019, 19:20 tinybunni, notifications@github.com wrote:

Is there any way to make the wearable widget show as a widget you scroll over to rather than as a watchface?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/NightscoutFoundation/xDrip/issues/460#issuecomment-491617527, or mute the thread https://github.com/notifications/unsubscribe-auth/ALZVHPTKX53WBLCEX6ZETF3PVBNYTANCNFSM4FCP234Q .

[Robkeano]

Oh yeh switched off all display functions apart from time so fits in wearable widget display screen area.

Rob

On Tue, 14 May 2019, 08:50 Rob Keane, robkeano@gmail.com wrote:

Yes Ive now set up Xdrip on my Galaxy watch with no issues. I always have connection now as well. Been running for two weeks and looks great with original graph. The solution came from this group chat from Artys guidance and others.

I couldnt find wearable widgets with watchface anymore on samsung store and used the wearable widget straight ap. The problems I was having was connection. Now resolved by

1. turning off trust auto connect in bluetooth settings in Xdrip.
2. On S9 uploading latest security patch in May
3. Turn off Adaptive Battery In Settings > device care > battery > triple dots top right of phone > settings > switch off > adaptive battery.
4. plus set Battery to optimised or Full performance.

Now have no connection problems and looks great and has graph making fully functional.

So dont see a need to go down tasker way. Unless something similar comes out of playing with it as wearable widgets not updated anymore and could start to have problems in the future.

Rob

On Sun, 12 May 2019, 19:20 tinybunni, notifications@github.com wrote:

Is there any way to make the wearable widget show as a widget you scroll over to rather than as a watchface?

— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/NightscoutFoundation/xDrip/issues/460#issuecomment-491617527, or mute the thread https://github.com/notifications/unsubscribe-auth/ALZVHPTKX53WBLCEX6ZETF3PVBNYTANCNFSM4FCP234Q .

[mikaelkleman]

wearable widegets as watch face is removed by samsung. i want to se my bs in the watch face so i want the tasker way to work. but something makes it to not update and i want to find out if it´s only me or if anybode else have this problem. watchmaker seems to be the problem, when i lost connection and open watchmaker and the transfer to watch button i get "can´t connect to watch" and have to go to galaxy store, klick on use watchmaker and then back to watchmaker and now i can transfer to watch. after that it workt some time again before connection drops again.

[ghost]

wearable widegets as watch face is removed by samsung. i want to se my bs in the watch face so i want the tasker way to work. but something makes it to not update and i want to find out if it´s only me or if anybode else have this problem. watchmaker seems to be the problem, when i lost connection and open watchmaker and the transfer to watch button i get "can´t connect to watch" and have to go to galaxy store, klick on use watchmaker and then back to watchmaker and now i can transfer to watch. after that it workt some time again before connection drops again.

I had the same problem. I completed the tasker programming and it worked for a while but then stopped updating. I had to resend the watchface from Watchmaker to reset it. Wearable widgets would continue to collect correctly, but as you say, it's not on the home screen and there's no way of using the data from it for a watch face. I'm afraid I gave up and returned my Samsung watch. It's a shame because it's a great looking watch with a good battery life and a useful phone app, but I also wanted the watch to be a collector (e.g. for swimming) so it was never perfect. I've switched to the Fossil Sport (OS Wear) and it seems better, though I can update you in a couple of days if you like.

[JayType1]

Yes Ive now set up Xdrip on my Galaxy watch with no issues. I always have connection now as well. Been running for two weeks and looks great with original graph. The solution came from this group chat from Artys guidance and others. I couldnt find wearable widgets with watchface anymore on samsung store and used the wearable widget straight ap. The problems I was having was connection. Now resolved by 1. turning off trust auto connect in bluetooth settings in Xdrip. 2. On S9 uploading latest security patch in May 3. Turn off Adaptive Battery In Settings > device care > battery > triple dots top right of phone > settings > switch off > adaptive battery. 4. plus set Battery to optimised or Full performance. Now have no connection problems and looks great and has graph making fully functional. So dont see a need to go down tasker way. Unless something similar comes out of playing with it as wearable widgets not updated anymore and could start to have problems in the future. Rob … On Sun, 12 May 2019, 19:20 tinybunni, @.***> wrote: Is there any way to make the wearable widget show as a widget you scroll over to rather than as a watchface? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#460 (comment)>, or mute the thread https://github.com/notifications/unsubscribe-auth/ALZVHPTKX53WBLCEX6ZETF3PVBNYTANCNFSM4FCP234Q .

Rob are you saying you've got xdrip working on watch as stand alone without the need for phone to process and transmit data?

please forgive me if I come across dim but am totally new to this

Jay

[Mr-Enigma]

@JayType1 pretty sure he means Wearable Widget on his Galaxy watch rather than a collector.

[JayType1]

Oh cool

Thanks

On Tue, 14 May 2019, 13:58 Mr-Enigma, notifications@github.com wrote:

@JayType1 https://github.com/JayType1 pretty sure he means Wearable Widget on his Galaxy watch rather than a collector.

— You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub https://github.com/NightscoutFoundation/xDrip/issues/460?email_source=notifications&email_token=AMBWKMOO4PT6KGULWJXSTF3PVKZOHA5CNFSM4FCP2342YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGODVLMOHY#issuecomment-492226335, or mute the thread https://github.com/notifications/unsubscribe-auth/AMBWKMKZDWBARQKKCJNUE4DPVKZOHANCNFSM4FCP234Q .

[mesaknz]

It is a shame Samsung removed Wearable Widgets watchface from Samsung Store. It was so easy to set up and use. I had it on my Samsung 42mm and lost it after upgrading to Samsung 46mm watch. I have tried to follow instructions for method using Tasker and Watch Maker but no success and not being very technically savvy I have no idea what I am doing wrong. Wearable Widgets watch face was a life saver and I wish Samsung allows it bsck. Is there any other app which will let me set Xdrip + to replicate on my Samsung 46mm? Any help or suggestions will be really appreciated.

[JayType1]

If you download Mr Enigma's settings, once you have Tasker, Autonotification, Watchmaker and watchmaker companion on watch

It should work

Jay

[Ecco5]

Wearable Widgets installed as a widget is a good solution. Swipe your watchface left to get immediate access to the Wearable Widgets widget where your glucose value and curve are displayed. I have a self made Watchmaker watchface on my watch (displayed somewhere above) and de WW widget as an extra if I swipe left.

[tinybunni]

I cannot for the life of me find wearable widgets... Can someone please explain to me how to get this for my watch (not the watchface) because I am apparently inept.

[Ecco5]

If you cannot find it on the app store, maybe the following approach will work. Open your browser on the phone. Then goto wearablewidgets.com. There select 'start here'. Then there is a link 'open the listing' directly.

[mesaknz]

Wearable Widgets watch face has been removed by Samsung due to copyrights and image with Watch Face showing Airbus airplane (person who made app told me this in reply to my email). I am able to find Wearable Widgets itself, just not watch face

Get Outlook for Android

On Sun, May 26, 2019 at 6:45 PM +1200, "Ecco5" notifications@github.com wrote:

If you cannot find it on the app store, maybe the following approach will work.

Open your browser on the phone. Then goto wearablewidgets.com. There select 'start here'.

Then there is a link 'open the listing' directly.

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or mute the thread.

[tinybunni]

I don't want the watchface, I have never been able to find the app version. I'll try that to get the listing. Thank you guys!

[mesaknz]

Wearable Widgets app is available from Google Play and Samsung Galaxy store

M & M Kafedžić

On Mon, May 27, 2019 at 3:22 AM +1200, "tinybunni" notifications@github.com wrote:

I don't want the watchface, I have never been able to find the app version. I'll try that to get the listing. Thank you guys!

— You are receiving this because you commented. Reply to this email directly, view it on GitHub, or mute the thread.

[miz012-om]

Hello,

version with widget is great. I am testing now S3 Frontier and Gear Sport to see which one to take... And I think S3 is winner :)

Can I ask you regarding your great post, how to add time stamp into widget? I didn't find it at all :(

Thanks

Ondrej

It is therefore advisable to add the time to your widget (you do this in xdrip) to see if the bgl displayed on your watch is the actual level and not a value from hours ago (the time of the widget gets updated by the phones widget together with the bgl). If you want to use the watchface mind that the time of the widget may lag behind the actual time a few minutes.

[JayType1]

Hello All

I have been using Mr Enigma's settings with my Samsung S7 and Galaxy watch, whilst there are disconnection issues with buggy Samsung Bluetooth and Xdrip so need reset of Miaomiao if moved away from phone rage.

whilst not perfect I am very happy with this setup and would like to thank Arty name and Mr. Enigma for there help in organising this setup

Jay

[Mr-Enigma]

Youre most welcome @JayType1 :)

[MTA619]

Hi! I use a GW and Mr-Enigma's guide to display my value on the watch. As I am a beginner at Tasker and Watchmaker (and Tizen) I do not solve how I get the watchface to look like I want. Is it possible to make a line change after the arrow so I can make the Gluco value and the arrow larger? If possible to show how many minutes since the latest update unlike the clock now so it doesn't take much space? And that I would like to remove the text Delta and mmol / l-.

I had so on my SW3 watch when I was running Android Wear.

Is there anyone who knows if it is possible and can explain to me how to proceed?

Thanks in advance!

[NLT1D]

@Mr-Enigma Thank you for your elaborate explanation!

Do miss the graph a little though, I blame samsung for that, haha. Still it is really nice to use my Galaxy watch again!

[Mr-Enigma]

@Mr-Enigma Thank you for your elaborate explanation!

Do miss the graph a little though, I blame samsung for that, haha. Still it is really nice to use my Galaxy watch again!

:) no problem, looks good!

[mesaknz]

@Mr-Enigma can you please advise how did you manage to add this to your watch?

[Mr-Enigma]

@mesaknz scroll up :) theres a step by step guide and my setting files

[mesaknz]

@Mr-Enigma I am sorry for being a pain in the neck, where about exactly are your steps to set it up? I have tried to do it using step by step guide from different site and using Tasker but still can't get it to show on my Galaxy Watch. I am so annoyed by Samsung removing Wearable Widgets Watch face, it was awesome.

[Ecco5]

Look above for : "arty-name commented on 25 Oct 2018" for a step by step procedure to constuct your own watchface using Tasker and Watchmaker. (Thanks again arty-name!) As an extra you can install 'Wearable Widgets' on your phone and Galaxy watch. You have to place this widget immediately next to your watchface (1st position of the widgets on your watch). This way, when you swipe left on the Watchmaker watchface on your watch, you get the display of the first widget (which is Wearable Widgets). This is important because bluetooth updates aren't always persistent on the watch. If you swipe left-right-left, you force a bluetooth refresh. You can compare the watchface screen with the widget (both on the watch) and insure updated values. Wearable Widgets is very reliable if you swipe this way. The watchmaker watchface is often reliable but not all the time. I use a Galaxy S8+ smartphone and a Galaxy S3 watch.

[st0ber]

@Mr-Enigma Can you upload your Watchface again? Please

[Mr-Enigma]

@st0ber yeah, looks like that link is broken, shoved it in my dropbox:

https://www.dropbox.com/sh/74stjd0xr3415oa/AADqzitDVQCSoD1rnIdjlOaaa?dl=0

[st0ber]

@Mr-Enigma Thank you