Closed GoogleCodeExporter closed 8 years ago
Sorry, that should not be a "Defect".
How to set the type to "Enhancement"?
Original comment by g.mue...@gmail.com
on 25 May 2010 at 9:18
Original comment by danhe...@gmail.com
on 25 May 2010 at 9:45
There is an RS274X statement that indicates the data is mirrored and I think the
import routine supports this.
Even if it doesn't, the drill operations perform on the locations of the
points. If
you mirror the points then the drilling operations will move with them. I use
the
gEDA tools and they produce their graphics as seen from the top as well.
For the file attached, I imported the drill file where the points appeared
above the
line. I added the circles as locations for drilling mounting holes. I then
mirrored
both the drilling points and the mounting hole circles about the line. I then
imported the trace data and mirrored these sketches about the line as well.
Finally
I imported the silk-screen data while selecting the 'generate centre-line
sketches'
option.
It does work if you mirror the graphics. The machine operations just follow
them.
Having said all of this, it would not be difficult to implement an 'import and
mirror' option.
Original comment by David.Ni...@gmail.com
on 25 May 2010 at 9:48
Attachments:
I have added options to import and mirror the data for drill, trace centrelines
and
isolation trace data.
Original comment by David.Ni...@gmail.com
on 26 May 2010 at 9:29
David, thanks a lot for implementing my wishes!
When mirroring by hand, I could not mirror the drills at first. I just selected
the
outlines and points by the rubberband rectangle. This actually does not select
the
"Operations" automatically. I now found out that it would have worked when
selecting
the "Operations" manually.
David, Dan and all the others: Great work!
Guido
Original comment by g.mue...@gmail.com
on 26 May 2010 at 8:03
Original issue reported on code.google.com by
g.mue...@gmail.com
on 25 May 2010 at 9:15