Start up procedures + systems.

NikolaiVChr / f16

General Dynamics F-16 for Flightgear flight simulator

GNU General Public License v2.0

121 stars 39 forks source link

Start up procedures + systems. #204

Open JMaverick16 opened 4 years ago

JMaverick16 commented 4 years ago

Follow up from older issue:

[X] SEC warning lights
[x] Probe heat test + on
[x] Fire & Oheat detect btn test
[x] EPU GEN test.
[x] FWD/AFT FUEL LOW warn lights in QTY SEL TEST.
[x] MFD self-test boot (lines+prism)
[x] DED BRT knob to 0
[x] Trim panel
[x] Trim AP DISC
[x] FLCS BIT, DBU ON/OFF.
[ ] ENG CONT PRI/SEC: Secondary Engine Control System (nozzle > 0 deg; to check nozzle)
[ ] IFF/AUX COMM panel: Master + C&I Backup/UFC knobs, TACAN switches
[ ] Avionics: INS ALIGN (DED page w/ progress timer when knob NORM, should last 5 to 7 mins).
[ ] Stby ADI uncage knob.
[ ] MFD TEST page
[ ] TWA: RWR PWR (CMDS)
[ ] Comms panel.
[ ] Trim panel indicators

NikolaiVChr commented 4 years ago

MFD power up "lines", initial + TEST page, error CLR.

Can you find info on how this looks? (that does not come from Falcon or DCS)

JMaverick16 commented 4 years ago

These are power up lines plus the "multicolor prism": Schermata 2020-04-17 alle 13 35 58 https://www.youtube.com/watch?v=VOeXKWRxaMc https://www.youtube.com/watch?v=5joEoIjN4MI

For initial test page and error clear, I saw them in our BMS session. DCS if it has should be a recent addition, will ask around.

JMaverick16 commented 4 years ago

Airbus code for ADIRS might be useful for INS alignment and implementation.

Reaper313sqn commented 4 years ago

The things I miss in the F-16 startup sequence are:

Secondary Engine Control System (nozzle > 0 deg; to check nozzle)
EPU Check (EPU Generator test; done with oxygen)

I can provide procedures for both (RNLAF F-16AM M2), also for FLCS BIT, INS ALIGN and some other if required.

JMaverick16 commented 4 years ago

Included both in the list.

JMaverick16 commented 4 years ago

Schermata 2020-08-02 alle 17 44 18 From Mudspike's DCS guide. Lines reference.

legoboyvdlp commented 4 years ago

Trim partly done, need 3D pointers though.

JMaverick16 commented 4 years ago

@legoboyvdlp Could you have a look at the SEC lights when you've got spare time?

legoboyvdlp commented 4 years ago

sure!

legoboyvdlp commented 4 years ago

If DCS manual is correct, we have a bug.

FLCS PMG should illuminate when FLCS TEST comes on.

In flightgear, FLCS PMG illuminates when you push to TEST and then release. It does not illuminate when switch is in TEST, but rather afterwards. It should extinguish after you release TEST, and then come on when JFS switch is set to 1 or 2.

Also, when you switch from BATT to MAIN PWR, ELEC SYS and SEC lights should turn on.

JMaverick16 commented 4 years ago

Never trust DCS too much. I think @NikolaiVChr made it according to the HAF manual, I guess better waiting for him to confirm. And yes we are missing the SEC lights on the warn panel. I recall saying it to you in Discord also ;)

JMaverick16 commented 3 years ago

cross lines and prism were added by Jake a few months ago

JMaverick16 commented 2 years ago

Both DBU and FLCS implemented by Jake