I've printed and assembled all the parte. It is working with the FASTLED demos. Now I want to install this but I'm getting the following error:
esp8266-fastled-desk-light:464:5: error: 'alexa_main' was not declared in this scope
alexa_main->setColor(r.toInt(),g.toInt(),b.toInt());
^
Here is my configuration:
/*######################## MAIN CONFIG ########################*/
#define DATA_PIN D4 // Should be GPIO02 on other boards like the NodeMCU
#define LED_TYPE WS2813 // You might also use a WS2811 or any other strip that is fastled compatible
#define COLOR_ORDER GRB // Change this if colors are swapped (in my case, red was swapped with green)
#define MILLI_AMPS 2000 // IMPORTANT: set the max milli-Amps of your power supply (4A = 4000mA)
#define VOLTS 5 // Voltage of the Power Supply
#define LINE_COUNT 8 // Amount of led strip pieces
#define LEDS_PER_LINE 8 // Amount of led pixel per single led strip piece
const bool apMode = false; // set to true if the esp8266 should open an access point
//#define SOUND_REACTIVE // Uncomment to enable the Sound reactive mode
#define SOUND_SENSOR_PIN A0 // An Analog sensor should be connected to an analog pin
#define SENSOR_TYPE 0 // 0: Dumb Sensors, 1: MAX4466 Sound Sensor, 2: MAX9814 Sound Sensor
#define HOSTNAME "ESP8266 Desk Lamp" // Name that appears in your network
#define CORRECTION UncorrectedColor // If colors are weird use TypicalLEDStrip
//#define RANDOM_AUTOPLAY_PATTERN // if enabled the next pattern for autoplay is choosen at random,
// if commented out patterns will play in order
//#define ENABLE_ALEXA_SUPPORT // Espalexa library required
/*######################## MAIN CONFIG END ####################*/
Hello,
I've printed and assembled all the parte. It is working with the FASTLED demos. Now I want to install this but I'm getting the following error:
Here is my configuration:
Any help?