[14.0]: after installing all needed gs1 modules, system still can't pares GS1 data matrix 2D code !

yehebihr commented 2 years ago

After installing ( Stock Barcodes ,GS1 Barcode API , Stock Barcodes GS1, and Stock Barcodes GS1 Expiry) system still not able to parse GS1 data matrix 2D codes

So when I receive a product by scanning the GS1 data matrix 2D code, the following should happen:

1- items shows up by recognizing its GTIN 2- lot number get updated 3- SN added 4- Expiry date added

But, what is happing now is showing incorrect barcode warning message showing the whole GS1 code

Do I have to add GS1 nomenclatures to the barcode nomenclatures in order to work ?

Also why [GS1-128/GS1-Datamatrix barcodes] appears in User Right form ? can you explain how to use it ?

@StefanRijnhart @sergio-teruel

yehebihr commented 2 years ago

Help is needed!

yehebihr commented 2 years ago

Hello!! Can anybody help 🥲 please?

rousseldenis commented 2 years ago

@yehebihr Could you please :

Enumerate the modules you've installed.
The exact flow that is problematic ('So when I receive a product by scanning...' - What do you do exactly? - Which screen?...)
The error message you have (if you have one).
Maybe a way to reproduce on runboat

yehebihr commented 2 years ago

Hey @rousseldenis

As requested

Enumerate the modules you've installed:
- stock_barcodes
- stock_barcodes_gs1
- stock_barcodes_gs1_expiry
- base_gs1_barcode (GS1 Barcode API)
The exact flow that is problematic:

After installing the mentioned modules above, system still can't parse gs1 2D data-matrix code. when using barcode interface on a receiving or picking and start scanning gs1 2D data-matrix code, the system generate error.
The error message you have (if you have one). Barcode: 010622107515007821188439251117220727106719015 (Barcode not found)

Can you please provide an explanation on how to configure and use these modules?

sergio-teruel commented 2 years ago

Hi @yehebihr maybe there is any commit that has not applied un v14. I Will rewiew this...

sergio-teruel commented 2 years ago

Fixed here https://github.com/OCA/stock-logistics-barcode/pull/429

@yehebihr Can you test?

yehebihr commented 2 years ago

@sergio-teruel thanks for your fast response!

I tested the module after installing the new updates but still cannot parse the gs1 barcode

Check the below screen shot for the error

sergio-teruel commented 2 years ago

Ok!! I will review more deeply. Can you copy and paste the full GS1 number and I'll check

sergio-teruel commented 2 years ago

With the lastest changes, now you must select in every operation type the proper scann option.

Can you check this??

yehebihr commented 2 years ago

010622107515007821188439251117220727106719015

https://barcode.tec-it.com/barcode.ashx?data=010622107515007821188439251117220727106719015&code=GS1DataMatrix&translate-esc=true&dmsize=Default

yehebihr commented 2 years ago

With the lastest changes, now you must select in every operation type the proper scann option.

Can you check this??

Let me check and get back to you

yehebihr commented 2 years ago

With the lastest changes, now you must select in every operation type the proper scann option.

Can you check this??

@sergio-teruel As requested, I selected the proper scan option for every operation type.

For example

Receipts -> picking in option
Delievry Orders -> picking out option

But, still the system can't parse the gs1 barcode as shown in the picture below.

Now To be in the picture, let me explain my needs:

My process is as follow:

1- I create a PO and send it to vendor 2- Confirm PO once order is confirmed by vendor 3- When order is delivered I go to receipt and start receiving the order using barcode interface 4- the products I'm receiving have gs1 datamatrix barcodes that have info such as GTIN numbers, expiry dates, lot numbers, serial numbers. Im assuming All those info are supposed to be mapped out to the proper fields in the product templates.

5- When selling the products I will be using gs1 datamatrix barcodes in POS to in order to track each product using either SN or LOT NUMBER

lastly, Do you guys have a user manual to learn how to configure these modules. I tried to follow all the provided instructions but I still couldn't figure out how to configure some modules

Thanks for your help, it is highly appreciated

sergio-teruel commented 2 years ago

Thanks for your explanation.

I will review it

We have to change the help documentation....

sergio-teruel commented 2 years ago

Hi..

An error occurs when the module base_gs1_barcode try to decode the barcode

https://github.com/OCA/stock-logistics-barcode/blob/14.0/base_gs1_barcode/models/gs1_barcode.py#L202

The position error is 38. At this moment I don't have a 2d reader so I can't check it

yehebihr commented 2 years ago

Kindly, would you please elaborate more on in more details about the errors ?

Thanks

yehebihr commented 2 years ago

Dears,

Kindly, please any updates on the issue.

Thanks,

yehebihr commented 2 years ago

Hi..

An error occurs when the module base_gs1_barcode try to decode the barcode

https://github.com/OCA/stock-logistics-barcode/blob/14.0/base_gs1_barcode/models/gs1_barcode.py#L202

The position error is 38. At this moment I don't have a 2d reader so I can't check it

@sergio-teruel

Any update regarding the issue please ?!

Also, I have a question regarding the POS operation, what scanning option should we assign? Do we use "pick out" ?

yehebihr commented 2 years ago

Hi..

An error occurs when the module base_gs1_barcode try to decode the barcode

https://github.com/OCA/stock-logistics-barcode/blob/14.0/base_gs1_barcode/models/gs1_barcode.py#L202

The position error is 38. At this moment I don't have a 2d reader so I can't check it

@rousseldenis @sergio-teruel

Could you please help ?

sergio-teruel commented 2 years ago

Sorry @yehebihr I had some tests with a Zebra MC93 and I think that your code is not good.. Have you any picture (Not generated by you) of a barcode datamatrix 2d?

yehebihr commented 2 years ago

Sorry @yehebihr I had some tests with a Zebra MC93 and I think that your code is not good..

Have you any picture (Not generated by you) of a barcode datamatrix 2d?

@sergio-teruel thanks for getting back to me

I've attached a few examples of the gs1 data matrix barcode below:

Your support is greatly appreciated

Thanks,

yehebihr commented 2 years ago

@sergio-teruel

Soft reminder

yehebihr commented 1 year ago

@rousseldenis @sergio-teruel

Is there any update on this please?

yehebihr commented 1 year ago

@LoisRForgeFlow Can you please help?

yehebihr commented 1 year ago

@sergio-teruel @rousseldenis @rvalyi

Still can't make it works!

Any help please?

github-actions[bot] commented 1 year ago

There hasn't been any activity on this issue in the past 6 months, so it has been marked as stale and it will be closed automatically if no further activity occurs in the next 30 days. If you want this issue to never become stale, please ask a PSC member to apply the "no stale" label.

OCA / stock-logistics-barcode

[14.0]: after installing all needed gs1 modules, system still can't pares GS1 data matrix 2D code ! #406