VideoTrackerCalibrationUtility doesnt detect the HDK

OSVR / OSVR-Docs

Unified documentation for the OSVR projects.

Apache License 2.0

89 stars 49 forks source link

VideoTrackerCalibrationUtility doesnt detect the HDK #95

Open TheUberMedic opened 7 years ago

TheUberMedic commented 7 years ago

The numbers dont appear on the white lights. It just stays on keeping the hdk infront of the camera and close.

jflemieux commented 7 years ago

Same here, could it be a sync cable malfunction? Unplugging and re plugging the camera's sync cable does nothing.

Balderick commented 7 years ago

Do not run osvr server before running videotrackingcalibration utility.

jflemieux commented 7 years ago

The OSVR Server is not running before/while running the utility. I can see the leds, but they are flashing about 2 times per second on the video feed, and all at the same time.

VRguy commented 7 years ago

This low-frequency flash means that the IR board is not receiving sync signals from the camera.

Could be:

Cable not securely connected to camera
"Y" sync cable not used
Some faulty part

jflemieux commented 7 years ago

After some plugging/unplugging, I've found that the cables must have been mishandled by the previous owner and fail when moving the HMD in certain ways (confirmable via console "Device not connected" and windows "new hardware" sounds).

The faulty/loose cables are the IR sync cable and one on top of the HMD.

I will attempt a refund.

Thanks for the help and sorry for the hassle.