Open GoogleCodeExporter opened 8 years ago
Its certainly a possibility for the future, but not soon.
Original comment by h.lepp...@gmail.com
on 27 Oct 2011 at 9:28
Also, sample that was encoded with Dolby Surround enabled would be nice.
Original comment by h.lepp...@gmail.com
on 27 Oct 2011 at 9:28
i think you can use almost all stereo content on tv-satellite. when you hear a
"stereo" stream, then the voice comes out of the center with dolby surround
analog.
almost all stereo content's on tv are dolby surround encoded.
now with lavfilters the problem is, that with stereo sources, the signal is
only on left and right speaker. no voice from center speaker.
Original comment by phaig...@gmail.com
on 31 Oct 2011 at 6:45
Issue 208 has been merged into this issue.
Original comment by h.lepp...@gmail.com
on 5 Mar 2012 at 3:43
The trick to getting the stereo sound to be decoded by the AVR is to output the
sound as Stereo. Currently, it doesn't change the windows speaker config, so
it decodes the stereo sound to the left and right channels, but then sends all
6 channels out to the receiver (the extra ones being silent). ReClock, on the
other hand, will actually change the speaker config to match the audio
channels, so the AVR can do it's thing.
Original comment by CraziFu...@gmail.com
on 6 Nov 2012 at 1:18
Original issue reported on code.google.com by
phaig...@gmail.com
on 23 Oct 2011 at 10:11