CaptainSweatpants
commented
4 years ago This broke my serial connection to my printer from octoprint as well. Disabling it returned connection abilities to my SKR 1.4 turbo; I haven't found a solution yet to update firmware via Octoprint with this BTT SKR 1.4 T board. For now, the only way i can update Marlin is to enable usbmount, then plug it into windows and the firmware folder will open there. I drop firmware.bin and reboot the printer. then once updated, back to ssh'ing over to the RPi and disabling usbmount so octoprint can connect again.
This isn't efficient at all.
YHRen
benlye
github-actions[bot]
Hardware Setup Octoprint 1.40 -> SKR 1.4 Turbo Uname: Linux octopi 4.19.75-v7l+ #1270 SMP Tue Sep 24 18:51:41 BST 2019 armv7l GNU/Linux Describe the problem Attempted to setup firmware updater per the instructions on the plugin github. usbmount did not seem to mount the usb micro sd.
Log Files dmesg snip with relevant lines
[ 1.619293] usb 1-1.4: New USB device found, idVendor=1d50, idProduct=6029, bcdDevice= 1.00 [ 1.619328] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.619359] usb 1-1.4: Product: Marlin USB Device [ 1.619383] usb 1-1.4: Manufacturer: marlinfw.org [ 1.619408] usb 1-1.4: SerialNumber: 0D00201CAF37A0805BBFB7B4F50020C3 [ 1.619649] systemd[1]: Detected architecture arm. [ 1.628490] usb-storage 1-1.4:1.2: USB Mass Storage device detected [ 1.629159] scsi host0: usb-storage 1-1.4:1.2 [ 1.629724] systemd[1]: Set hostname to.
[ 1.636809] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[ 1.931871] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[ 1.931933] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[ 1.966844] systemd[1]: /etc/systemd/system/systemd-udevd.service.d/override.conf:3: Unknown lvalue 'Mountflags' in section 'Service', ignoring
[ 2.274485] systemd[1]: Listening on udev Control Socket.
[ 2.275546] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 2.276776] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 2.643644] scsi 0:0:0:0: Direct-Access Marlin SDCard 01 1.0 PQ: 0 ANSI: 0 CCS
[ 2.696548] sd 0:0:0:0: [sda] Attached SCSI removable disk
Octoprint snip when using /tmp as flash location - tells me plugin is working as expected.
2020-05-29 20:33:51,259 - octoprint.startup - INFO - ** 2020-05-29 20:33:51,260 - octoprint.startup - INFO - Starting OctoPrint 1.4.0 2020-05-29 20:33:51,261 - octoprint.startup - INFO - ** 2020-05-29 20:33:51,575 - octoprint.util.connectivity_checker - INFO - Connectivity changed from offline to online 2020-05-29 20:33:51,577 - octoprint.startup - INFO - Blacklist processing done, adding 1 blacklisted plugin versions: roomtemp (any) 2020-05-29 20:33:51,606 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2020-05-29 20:33:52,242 - octoprint.plugin.core - INFO - Found 16 plugin(s) providing 16 mixin implementations, 29 hook handlers 2020-05-29 20:33:52,341 - octoprint.server.heartbeat - INFO - Starting server heartbeat, 900.0s interval 2020-05-29 20:33:52,355 - octoprint.server - INFO - Intermediary server started 2020-05-29 20:33:52,355 - octoprint.plugin.core - INFO - Loading plugins from /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins, /home/pi/.octoprint/plugins and installed plugin packages... 2020-05-29 20:33:52,418 - octoprint.plugin.core - INFO - Found 16 plugin(s) providing 16 mixin implementations, 29 hook handlers 2020-05-29 20:33:52,435 - octoprint.filemanager.storage - INFO - Initializing the file metadata for /home/pi/.octoprint/uploads... 2020-05-29 20:33:52,436 - octoprint.filemanager.storage - INFO - ... file metadata for /home/pi/.octoprint/uploads initialized successfully. 2020-05-29 20:33:52,439 - octoprint.server - INFO - Added new permission from plugin action_command_prompt: PLUGIN_ACTION_COMMAND_PROMPT_INTERACT (needs: u"Need(method='role', value=u'plugin_action_command_prompt_interact')") 2020-05-29 20:33:52,440 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_READ (needs: u"Need(method='role', value=u'plugin_announcements_read')") 2020-05-29 20:33:52,440 - octoprint.server - INFO - Added new permission from plugin announcements: PLUGIN_ANNOUNCEMENTS_MANAGE (needs: u"Need(method='role', value=u'plugin_announcements_manage'), Need(method='role', value=u'plug in_announcements_read')") 2020-05-29 20:33:52,441 - octoprint.server - INFO - Added new permission from plugin appkeys: PLUGIN_APPKEYS_ADMIN (needs: u"Need(method='role', value=u'plugin_appkeys_admin')") 2020-05-29 20:33:52,442 - octoprint.server - INFO - Added new permission from plugin backup: PLUGIN_BACKUP_ACCESS (needs: u"Need(method='role', value=u'plugin_backup_access')") 2020-05-29 20:33:52,443 - octoprint.server - INFO - Added new permission from plugin logging: PLUGIN_LOGGING_MANAGE (needs: u"Need(method='role', value=u'plugin_logging_manage')") 2020-05-29 20:33:52,444 - octoprint.server - INFO - Added new permission from plugin pi_support: PLUGIN_PI_SUPPORT_STATUS (needs: u"Need(method='role', value=u'plugin_pi_support_check')") 2020-05-29 20:33:52,444 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_MANAGE (needs: u"Need(method='role', value=u'plugin_pluginmanager_manage')") 2020-05-29 20:33:52,446 - octoprint.server - INFO - Added new permission from plugin pluginmanager: PLUGIN_PLUGINMANAGER_INSTALL (needs: u"Need(method='role', value=u'plugin_pluginmanager_install'), Need(method='role', value=u'pl ugin_pluginmanager_manage')") 2020-05-29 20:33:52,446 - octoprint.server - INFO - Added new permission from plugin printer_safety_check: PLUGIN_PRINTER_SAFETY_CHECK_DISPLAY (needs: u"Need(method='role', value=u'plugin_printer_safety_check_display')") 2020-05-29 20:33:52,447 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_CHECK (needs: u"Need(method='role', value=u'plugin_softwareupdate_check')") 2020-05-29 20:33:52,448 - octoprint.server - INFO - Added new permission from plugin softwareupdate: PLUGIN_SOFTWAREUPDATE_UPDATE (needs: u"Need(method='role', value=u'plugin_softwareupdate_update')") 2020-05-29 20:33:52,457 - octoprint.access.users - INFO - Migrating user billbr to new granular permission system 2020-05-29 20:33:52,484 - octoprint.plugins.softwareupdate - INFO - Version cache was created for another version of OctoPrint, not using it 2020-05-29 20:33:53,036 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-05-29 20:33:53,587 - octoprint.util.pip - INFO - Version of pip is 19.3.1 2020-05-29 20:33:53,588 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2020-05-29 20:33:53,589 - octoprint.util.pip - INFO - ==> pip ok -> yes 2020-05-29 20:33:53,592 - octoprint.plugin.core - INFO - Initialized 16 plugin implementation(s) 2020-05-29 20:33:53,644 - octoprint.plugin.core - INFO - 16 plugin(s) registered with the system: | Action Command Prompt Support (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/action_command_prompt | Announcement Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/announcements | Anonymous Usage Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/tracking | Application Keys Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/appkeys | Backup & Restore (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/backup | Core Wizard (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/corewizard | Discovery (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/discovery | Error Tracking (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/errortracking | Firmware Updater (1.7.0) = /home/pi/oprint/local/lib/python2.7/site-packages/octoprint_firmwareupdater | Logging (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/logging | Login UI (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/loginui | Pi Support Plugin (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pi_support | Plugin Manager (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/pluginmanager | Printer Safety Check (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/printer_safety_check | Software Update (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/softwareupdate | Virtual Printer (bundled) = /home/pi/oprint/lib/python2.7/site-packages/octoprint/plugins/virtual_printer Prefix legend: ! = disabled, # = blacklisted, * = incompatible 2020-05-29 20:33:53,653 - octoprint.environment - INFO - Detected environment is Python 2.7.16 under Linux (linux2). Details: | hardware: | cores: 4 | freq: 1500.0 | ram: 4041732096 | os: | id: linux | platform: linux2 | plugins: | pi_support: | model: Raspberry Pi 4 Model B Rev 1.1 | octopi_version: 0.17.0 | python: | pip: 19.3.1 | version: 2.7.16 | virtualenv: /home/pi/oprint 2020-05-29 20:33:53,660 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/webassets... 2020-05-29 20:33:53,674 - octoprint.server - INFO - Reset webasset folder /home/pi/.octoprint/generated/.webassets-cache... 2020-05-29 20:33:54,127 - octoprint.server - INFO - Shutting down intermediary server... 2020-05-29 20:33:54,286 - octoprint.server - INFO - Intermediary server shut down 2020-05-29 20:33:54,287 - octoprint.events - INFO - Processing startup event, this is our first event 2020-05-29 20:33:54,289 - octoprint.events - INFO - Adding 1 events to queue that were held back before startup event 2020-05-29 20:33:54,293 - octoprint.filemanager - INFO - Adding backlog items from all storage types to analysis queue... 2020-05-29 20:33:54,315 - octoprint.server.util.watchdog - INFO - Running initial scan on watched folder... 2020-05-29 20:33:54,329 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2020-05-29 20:33:54,339 - octoprint.server.util.watchdog - INFO - ... initial scan done. 2020-05-29 20:33:54,476 - octoprint.filemanager - INFO - Added 0 items from storage type "local" to analysis queue 2020-05-29 20:33:54,590 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _http._tcp 2020-05-29 20:33:54,825 - octoprint.plugins.discovery - INFO - Registered 'OctoPrint instance on octopi' for _octoprint._tcp 2020-05-29 20:33:55,007 - octoprint.plugins.discovery - INFO - Registered OctoPrint instance on octopi for SSDP 2020-05-29 20:33:55,236 - octoprint.server - INFO - Listening on http://127.0.0.1:5000 2020-05-29 20:33:55,443 - octoprint.plugins.pluginmanager - INFO - Loaded plugin repository data from disk, was still valid 2020-05-29 20:33:55,929 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2020-05-29 20:33:56,094 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.114 2020-05-29 20:33:56,356 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-05-29 20:33:56,357 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-05-29 20:33:56,374 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages (writable -> yes), --user flag needed -> no, virtual env -> yes 2020-05-29 20:33:56,377 - octoprint.util.pip - INFO - ==> pip ok -> yes 2020-05-29 20:33:56,434 - octoprint.plugins.pluginmanager - INFO - Loaded notice data from disk, was still valid 2020-05-29 20:33:56,457 - octoprint.server.util.flask - INFO - Passively logging in user billbr from ::ffff:192.168.1.114 2020-05-29 20:33:56,458 - octoprint.access.users - INFO - Logged in user: billbr 2020-05-29 20:33:56,473 - octoprint.server.util.sockjs - INFO - User billbr logged in on the socket from client ::ffff:192.168.1.114 2020-05-29 20:33:56,600 - octoprint.util.pip - INFO - Using "/home/pi/oprint/bin/python2 -m pip" as command to invoke pip 2020-05-29 20:33:58,158 - octoprint.server.util.flask - INFO - Passively logging in user billbr from ::ffff:192.168.1.114 2020-05-29 20:33:58,158 - octoprint.access.users - INFO - Logged in user: billbr 2020-05-29 20:33:58,603 - octoprint.util.pip - INFO - pip installs to /home/pi/oprint/lib/python2.7/site-packages/ (writable -> yes), --user flag needed -> no, virtual env -> yes 2020-05-29 20:33:58,604 - octoprint.util.pip - INFO - ==> pip ok -> yes 2020-05-29 20:33:58,622 - octoprint.plugins.softwareupdate - INFO - Saved version cache to disk 2020-05-29 20:33:58,700 - octoprint.server.preemptive_cache - INFO - Preemptively caching / (ui _default) for {'query_string': 'l10n=en', 'path': '/', 'base_url': 'http://192.168.1.204/'} 2020-05-29 20:33:59,424 - octoprint.plugins.tracking - INFO - Sent tracking event ping, payload: {'octoprint_uptime': 6} 2020-05-29 20:34:00,538 - octoprint.plugins.tracking - INFO - Sent tracking event pong, payload: {'plugins': u'firmwareupdater:1.7.0'} 2020-05-29 20:34:01,519 - octoprint.plugins.tracking - INFO - Sent tracking event startup, payload: {'python': '2.7.16', 'ram': 4041732096L, u'octopi_version': u'0.17.0', 'version': u'1.4.0', 'pip': '19.3.1', 'cores': 4, 'freq': 1500.0, u'pi_model': u'Raspberry Pi 4 Model B Rev 1.1', 'os': 'linux'} 2020-05-29 20:34:05,772 - octoprint.server.preemptive_cache - INFO - ... done in 7.07s 2020-05-29 20:34:05,779 - octoprint.server.util.sockjs - INFO - Client connection closed: ::ffff:192.168.1.114 2020-05-29 20:34:06,297 - octoprint.server.util.sockjs - INFO - New connection from client: ::ffff:192.168.1.114 2020-05-29 20:34:06,358 - octoprint.server.util.flask - INFO - Passively logging in user billbr from ::ffff:192.168.1.114 2020-05-29 20:34:06,358 - octoprint.access.users - INFO - Logged in user: billbr 2020-05-29 20:34:07,663 - octoprint.server.util.sockjs - INFO - User billbr logged in on the socket from client ::ffff:192.168.1.114 2020-05-29 20:35:17,944 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Detecting serial port" 2020-05-29 20:35:18,057 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting serial port" to "Opening serial port" 2020-05-29 20:35:18,077 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Detecting baudrate" 2020-05-29 20:35:19,111 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-05-29 20:35:19,118 - octoprint.util.comm - INFO - Changing monitoring state from "Detecting baudrate" to "Operational" 2020-05-29 20:35:19,126 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-05-29 20:35:19,136 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2020-05-29 20:35:19,138 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2020-05-29 20:35:19,145 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.5.3 (GitHub)" 2020-05-29 20:35:19,181 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2020-05-29 20:35:19,950 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 0, u'printer_port': u'AUTO', 'firmware_name': u'Marlin 2.0.5.3 (GitHub)'} 2020-05-29 20:39:51,638 - octoprint.plugins.firmwareupdater - INFO - Firmware update started 2020-05-29 20:39:51,645 - octoprint.plugins.firmwareupdater - INFO - Disconnecting from printer 2020-05-29 20:39:51,664 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline" 2020-05-29 20:39:51,679 - octoprint.plugins.firmwareupdater - INFO - Unmounting SD card: 'sudo umount /tmp' 2020-05-29 20:39:51,771 - octoprint.plugins.firmwareupdater - INFO - Pre-flash reset: attempting to reset the board 2020-05-29 20:39:51,774 - octoprint.plugins.firmwareupdater - INFO - Resetting LPC1768 at '/dev/ttyACM0' 2020-05-29 20:39:51,851 - octoprint.plugins.firmwareupdater - INFO - Waiting for LPC1768 at '/dev/ttyACM0' to reset 2020-05-29 20:39:52,506 - octoprint.plugins.firmwareupdater - INFO - LPC1768 at '/dev/ttyACM0' is resetting 2020-05-29 20:39:55,743 - octoprint.plugins.firmwareupdater - INFO - LPC1768 at '/dev/ttyACM0' reset in 3.88 seconds 2020-05-29 20:40:05,398 - octoprint.plugins.firmwareupdater - INFO - Flashing successful. 2020-05-29 20:40:05,406 - octoprint.plugins.firmwareupdater - INFO - No postflash gcode or postflash is disabled, setting run_postflash_gcode to false 2020-05-29 20:40:05,412 - octoprint.plugins.firmwareupdater - INFO - Reconnecting to printer: port=/dev/ttyACM0, baudrate=115200, profile={'heatedChamber': False, 'name': 'Tazmania', 'color': 'default', 'axes': {'y': {'speed': 60 00, 'inverted': False}, 'x': {'speed': 6000, 'inverted': False}, 'z': {'speed': 200, 'inverted': False}, 'e': {'speed': 300, 'inverted': False}}, 'heatedBed': True, 'volume': {'origin': 'lowerleft', 'formFactor': 'rectangular', ' depth': 200.0, 'width': 200.0, 'custom_box': False, 'height': 200.0}, 'model': 'TAZ5.3', 'id': '_default', 'extruder': {'count': 1, 'nozzleDiameter': 0.4, 'offsets': [(0.0, 0.0)], 'sharedNozzle': False}} 2020-05-29 20:40:05,516 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial port" 2020-05-29 20:40:05,522 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2020-05-29 20:40:05,535 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-05-29 20:40:11,889 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-05-29 20:40:11,894 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2020-05-29 20:40:11,917 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2020-05-29 20:40:11,919 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2020-05-29 20:40:11,924 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-05-29 20:40:11,932 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.5.3 (GitHub)" 2020-05-29 20:40:11,981 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting 2020-05-29 20:40:12,659 - octoprint.plugins.tracking - INFO - Sent tracking event printer_connected, payload: {u'printer_baudrate': 115200, u'printer_port': '/dev/ttyACM0', 'firmware_name': u'Marlin 2.0.5.3 (GitHub)'} 2020-05-29 20:45:47,605 - octoprint.util.comm - INFO - Changing monitoring state from "Operational" to "Offline" 2020-05-29 20:46:35,893 - octoprint.util.comm - INFO - Changing monitoring state from "Offline" to "Opening serial port" 2020-05-29 20:46:35,895 - octoprint.util.comm - INFO - Changing monitoring state from "Opening serial port" to "Connecting" 2020-05-29 20:46:35,901 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-05-29 20:46:35,903 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-05-29 20:46:35,906 - octoprint.util.comm - INFO - Changing monitoring state from "Connecting" to "Operational" 2020-05-29 20:46:35,911 - octoprint.plugins.firmwareupdater - INFO - Got CONNECTED event 2020-05-29 20:46:35,912 - octoprint.plugins.firmwareupdater - INFO - Run postflash flag is not set 2020-05-29 20:46:35,914 - octoprint.util.comm - INFO - M110 detected, setting current line number to 0 2020-05-29 20:46:35,919 - octoprint.util.comm - INFO - Printer reports firmware name "Marlin 2.0.5.3 (GitHub)" 2020-05-29 20:46:35,931 - octoprint.util.comm - INFO - Firmware states that it supports temperature autoreporting
Additional context Device shows up in /dev/disk/by-id as usb-Marlin_SDCard_01_0D00201CAF37A0805BBFB7B4F50020C3-0:0
lsusb sees the marlin board Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 1d50:6029 OpenMoko, Inc. Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
udevadm test --action=add /sys/block/sda
This program is for debugging only, it does not run any program specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run.
Load module index Skipping empty file: /etc/systemd/network/99-default.link Created link configuration context. Reading rules file: /lib/udev/rules.d/10-local-rpi.rules Reading rules file: /lib/udev/rules.d/15-i2c-modprobe.rules Reading rules file: /lib/udev/rules.d/40-usb_modeswitch.rules Reading rules file: /lib/udev/rules.d/50-firmware.rules Reading rules file: /lib/udev/rules.d/50-udev-default.rules Reading rules file: /lib/udev/rules.d/55-dm.rules Reading rules file: /lib/udev/rules.d/60-block.rules Reading rules file: /lib/udev/rules.d/60-cdrom_id.rules Reading rules file: /lib/udev/rules.d/60-crda.rules Reading rules file: /lib/udev/rules.d/60-drm.rules Reading rules file: /lib/udev/rules.d/60-evdev.rules Reading rules file: /lib/udev/rules.d/60-flashrom.rules Reading rules file: /lib/udev/rules.d/60-input-id.rules Reading rules file: /lib/udev/rules.d/60-persistent-alsa.rules Reading rules file: /lib/udev/rules.d/60-persistent-input.rules Reading rules file: /lib/udev/rules.d/60-persistent-storage-dm.rules Reading rules file: /lib/udev/rules.d/60-persistent-storage-tape.rules Reading rules file: /lib/udev/rules.d/60-persistent-storage.rules Reading rules file: /lib/udev/rules.d/60-persistent-v4l.rules Reading rules file: /lib/udev/rules.d/60-sensor.rules Reading rules file: /lib/udev/rules.d/60-serial.rules Reading rules file: /lib/udev/rules.d/60-triggerhappy.rules Reading rules file: /lib/udev/rules.d/64-btrfs.rules Reading rules file: /lib/udev/rules.d/69-libmtp.rules Reading rules file: /lib/udev/rules.d/70-joystick.rules Reading rules file: /lib/udev/rules.d/70-microbit.rules Reading rules file: /lib/udev/rules.d/70-mouse.rules Reading rules file: /lib/udev/rules.d/70-power-switch.rules Reading rules file: /lib/udev/rules.d/70-touchpad.rules Reading rules file: /lib/udev/rules.d/70-uaccess.rules Reading rules file: /lib/udev/rules.d/71-seat.rules Reading rules file: /lib/udev/rules.d/73-seat-late.rules Reading rules file: /lib/udev/rules.d/73-special-net-names.rules Reading rules file: /lib/udev/rules.d/73-usb-net-by-mac.rules Reading rules file: /lib/udev/rules.d/75-net-description.rules Reading rules file: /lib/udev/rules.d/75-probe_mtd.rules Reading rules file: /lib/udev/rules.d/78-sound-card.rules Reading rules file: /lib/udev/rules.d/80-debian-compat.rules Reading rules file: /lib/udev/rules.d/80-drivers.rules Reading rules file: /lib/udev/rules.d/80-ifupdown.rules Reading rules file: /lib/udev/rules.d/80-net-setup-link.rules Reading rules file: /lib/udev/rules.d/80-noobs.rules Reading rules file: /lib/udev/rules.d/85-hwclock.rules Reading rules file: /lib/udev/rules.d/85-regulatory.rules Reading rules file: /lib/udev/rules.d/89-alsa-ucm.rules Reading rules file: /lib/udev/rules.d/90-alsa-restore.rules Reading rules file: /lib/udev/rules.d/90-console-setup.rules Reading rules file: /lib/udev/rules.d/90-pi-bluetooth.rules Reading rules file: /etc/udev/rules.d/95-ads7846.rules Reading rules file: /lib/udev/rules.d/95-dm-notify.rules Reading rules file: /lib/udev/rules.d/97-hid2hci.rules Reading rules file: /etc/udev/rules.d/99-com.rules Reading rules file: /lib/udev/rules.d/99-systemd.rules Reading rules file: /lib/udev/rules.d/usbmount.rules Rules contain 196608 bytes tokens (16384 * 12 bytes), 23210 bytes strings 15373 strings (124791 bytes), 13054 de-duplicated (103901 bytes), 2320 trie nodes used Invalid inotify descriptor. DEVPATH=/devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.2/host0/target0:0:0/0:0:0:0/block/sda DEVNAME=/dev/sda DEVTYPE=disk MAJOR=8 MINOR=0 ACTION=add SUBSYSTEM=block ID_VENDOR=Marlin ID_VENDOR_ENC=Marlin\x20\x20 ID_VENDOR_ID=1d50 ID_MODEL=SDCard_01 ID_MODEL_ENC=SDCard\x2001\x20\x20\x20\x20\x20\x20\x20 ID_MODEL_ID=6029 ID_REVISION=1.0 ID_SERIAL=Marlin_SDCard_01_0D00201CAF37A0805BBFB7B4F50020C3-0:0 ID_SERIAL_SHORT=0D00201CAF37A0805BBFB7B4F50020C3 ID_TYPE=disk ID_INSTANCE=0:0 ID_BUS=usb ID_USB_INTERFACES=:020200:0a0000:080650: ID_USB_INTERFACE_NUM=02 ID_USB_DRIVER=usb-storage DEVLINKS=/dev/disk/by-path/platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.4:1.2-scsi-0:0:0:0 /dev/disk/by-id/usb-Marlin_SDCard_01_0D00201CAF37A0805BBFB7B4F50020C3-0:0 ID_PATH=platform-fd500000.pcie-pci-0000:01:00.0-usb-0:1.4:1.2-scsi-0:0:0:0 ID_PATH_TAG=platform-fd500000_pcie-pci-0000_01_00_0-usb-0_1_4_1_2-scsi-0_0_0_0 TAGS=:systemd: USEC_INITIALIZED=3492256 run: '/usr/share/usbmount/usbmount add' Unload module index Unloaded link configuration context.
running usbmount did not work. Found this issue that indicates usbmount is an orphan project. https://raspberrypi.stackexchange.com/questions/100312/raspberry-4-usbmount-not-working