Closed GoogleCodeExporter closed 8 years ago
Hello, Miguel.
It's very strange behaviour: WJoy and Wii U Wiimote is not compatible, and (i
hope) WJoy can't detect Wii U controller. But, may be Nintendo assign to Wii U
and Wii remotes same names? I can't verify this.
But I was able to reproduce this crash with original Wii Remote, and I fixed
it. I attached new build of test application. Can you test it? :)
PS: thanks for you feedback :)
Original comment by alexandr.serkov
on 5 Jan 2013 at 8:35
[deleted comment]
This is the Wii U Wiimote, not the Wii U Gamepad. The Wii U Wiimote is supposed
to be compatible with a regular Wii, so hopefully WJoy could support it too.
I'll test that, thanks.
Original comment by miguelpontes
on 5 Jan 2013 at 3:24
Got this:
Begin discovery...
Wrapper created
Nintendo RVL-CNT-01-TR
(
"<Wiimote: 0x7f9a3be24540>"
)
End discovery
Disconnected
(
)
Wrapper deleted
Original comment by miguelpontes
on 5 Jan 2013 at 4:10
Hmm... Looks like if you device disconnect itself. But i find and fix only
crash. Can you test this contoller with original Wii or Wii U?
And, please, attach here this screen with you controller properties (may be 2
:) ):
Original comment by alexandr.serkov
on 5 Jan 2013 at 4:54
Oh, I don't have the remote at all in my Bluetooth devices. Should I try to
manually pair the device first?
I tried to replace the new Wiimote.framework in WJoy.app and the behavior is
the same as test.app, Wiimote connects and then disconnects right after.
Original comment by miguelpontes
on 5 Jan 2013 at 5:00
Yes, try to pair the device. And replacing Wiimote.framework don't help - fixed
only crash, but not diconnecting of device.
Original comment by alexandr.serkov
on 5 Jan 2013 at 5:08
Hm, it fails to pair at first, but if I hit "Passcode Options" and pick "No
passcode," it pairs just fine.
Same connect/disconnect behavior, though.
Original comment by miguelpontes
on 5 Jan 2013 at 5:12
Could it be related to this?
http://wiibrew.org/wiki/Wiimote#Bluetooth_Communication
> The newer Wiimote RVL-CNT-01-TR shuts down immediately upon receiving any HID
output report if it has been turned on using the 1 + 2 method, although it
works using the sync button. It is possible that authentication is now
mandatory for the 1 + 2 temporary sync[check].
Original comment by miguelpontes
on 5 Jan 2013 at 5:13
Yahoo, may be is it! I don't know about it. Can you test connecting with sync
button? I have only old Wiimote (without TR) :(
Original comment by alexandr.serkov
on 5 Jan 2013 at 5:18
Aha, it works! Thanks, it seems like it paired perfectly now.
Original comment by miguelpontes
on 5 Jan 2013 at 5:20
Thank you for you help, i post this link to wiibrew.org on project page. Big
thanks!
Original comment by alexandr.serkov
on 5 Jan 2013 at 5:25
Original issue reported on code.google.com by
miguelpontes
on 3 Jan 2013 at 1:27