OlivierC-FR / ESP32-INAV-Radar

GNU General Public License v2.0
63 stars 22 forks source link

FYI: Module tested and seems to be working #6

Closed wx4cb closed 2 years ago

wx4cb commented 2 years ago

@OlivierC-FR

just an FYI, you can add these to your working list with stock firmware. Havent done a flight test as i'm the only one that has inav at the minute, but on the bench they seem to work fine

https://www.ebay.com/itm/184468688127?var=692173575079

OlivierC-FR commented 2 years ago

Ok thanks, I'll add a new target, even if it's the same pinouts as the Lilygos 1.0. Just to be sure, you're confirming you have 2 seeing each other on the ground, and at least one sees the flight controller it's attached to ? With INAV version etc ?

wx4cb commented 2 years ago

Correct, i have 3 total boards, 1 in a plane and sees inav v4rc1 fine and the other two on the bench and they all see each other..

Three total nodes a, b, c

now as far as the osd side. as I say, i havent tested that, but i did just find out about it supposedly working with mwptools so i'll see how that goes and see if i can find it as a GCS