Oliviers-OSS libmpsse issues

Oliviers-OSS / libmpsse

Automatically exported from code.google.com/p/libmpsse

0 stars 0 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

i2c ACK bit not read properly

#54 GoogleCodeExporter opened 9 years ago
0
Different names of values in examples/spiflash.py

#53 GoogleCodeExporter opened 9 years ago
0
Patch for /trunk/src/mpsse.c

#52 GoogleCodeExporter opened 9 years ago
0
I2C eeprom python script available

#51 GoogleCodeExporter opened 9 years ago
1
where is pylibmpsse ?

#50 GoogleCodeExporter opened 9 years ago
1
FIXED Apple OS X library compilation and installation with libftdi1 from MacPorts

#49 GoogleCodeExporter opened 9 years ago
0
SetDirection in MPSSE mode

#48 GoogleCodeExporter opened 9 years ago
0
I2C Read gives one bad bit, but only rarely

#47 GoogleCodeExporter opened 9 years ago
0
How to address i2c slaves

#46 GoogleCodeExporter opened 9 years ago
1
Problems with the Setup

#45 GoogleCodeExporter opened 9 years ago
0
FastTransfer always fails

#44 GoogleCodeExporter opened 9 years ago
0
pyswig versions of functions leaked into C library (libmpsse.a/.so)

#43 GoogleCodeExporter opened 9 years ago
0
Erronous start condition if using GPIO on low bits in i2c mode

#42 GoogleCodeExporter opened 9 years ago
0
Failed to initialize MPSSE: device not found

#41 GoogleCodeExporter opened 9 years ago
0
make install command does not work at MinGW

#40 GoogleCodeExporter opened 9 years ago
0
Patch for /trunk/src/mpsse.i

#39 GoogleCodeExporter opened 9 years ago
1
WritePins always fails

#38 GoogleCodeExporter opened 9 years ago
2
PATCH: multiple deive support

#37 GoogleCodeExporter opened 9 years ago
0
Unable to build out-of-source

#36 GoogleCodeExporter opened 9 years ago
4
I2C Read is not working for me

#35 GoogleCodeExporter closed 9 years ago
2
SDA line held low even after a Stop issued.

#34 GoogleCodeExporter opened 9 years ago
2
fast.o target is missing LIBFTDI1 define

#33 GoogleCodeExporter closed 9 years ago
2
configure isn't finding locally installed libftdi1

#32 GoogleCodeExporter opened 9 years ago
2
Possible memory leak in Open method

#31 GoogleCodeExporter closed 9 years ago
3
FastTransfer doesn't work

#30 GoogleCodeExporter opened 9 years ago
2
Unable to make multiple simultaneous connections to separate interfaces

#29 GoogleCodeExporter opened 9 years ago
3
fast.c fails to compile with libftdi1

#28 GoogleCodeExporter closed 9 years ago
1
FT232H does not use open-drain outputs

#27 GoogleCodeExporter closed 9 years ago
4
SPI mode speedup by removing many memcopy

#26 GoogleCodeExporter closed 9 years ago
4
configure using "python --version" instead of "python -V" to find libraries

#25 GoogleCodeExporter closed 9 years ago
1
Failed to open MPSSE: device not found

#24 GoogleCodeExporter closed 9 years ago
7
Cannot send only 4 bits of data in SPI mode

#23 GoogleCodeExporter closed 9 years ago
3
SPI transfer with +1024 bytes size

#22 GoogleCodeExporter closed 9 years ago
1
unnecessary delay due to excessive buffer purging in raw_read

#21 GoogleCodeExporter closed 9 years ago
2
libftdi/ftdi.h

#20 GoogleCodeExporter closed 9 years ago
1
Feature request: Allow using adapter index to differentiate between multiple connected devices

#19 GoogleCodeExporter closed 9 years ago
1
SetMode sets all high byte pins to output

#18 GoogleCodeExporter closed 9 years ago
1
No ability to bulk set pins, or set pin direction.

#17 GoogleCodeExporter closed 9 years ago
3
missing standard functions

#16 GoogleCodeExporter closed 9 years ago
11
One too many clock edges are output whe using SPI modes 1 and 3

#15 GoogleCodeExporter closed 9 years ago
5
gpio example segfaults

#14 GoogleCodeExporter closed 9 years ago
2
I2C start condition have a bug

#13 GoogleCodeExporter closed 9 years ago
5
Fix makefile to make libmpsse easier to package

#12 GoogleCodeExporter closed 9 years ago
1
clock rates > 15MHz cause a hardware baudrate of 30MHz

#11 GoogleCodeExporter closed 9 years ago
1
Write before read & transfer required, Transfer broken with FT232H

#10 GoogleCodeExporter closed 9 years ago
5
PinHigh/PinLow do not seem to function as would be expected.

#9 GoogleCodeExporter closed 9 years ago
17
Can't read bytes sent during write cycle

#8 GoogleCodeExporter closed 9 years ago
11
Added selection on basis of product description (iProduct)

#7 GoogleCodeExporter closed 9 years ago
1
build_block_buffer() does not end I2C read sequence with NACK

#6 GoogleCodeExporter closed 9 years ago
5
Open() opens wrong interface

#5 GoogleCodeExporter closed 9 years ago
3