search

OllisGit / OctoPrint-SpoolManager

Plugin for managing Spools
169 stars 57 forks source link

Temperature offsets not working? #266

Closed Sleepy81 closed 2 years ago

Sleepy81 commented 2 years ago

I have enabled nozzle and bed temperature offsets in the plugin settings, but I'm not sure its working. I have a sliced gcode at 220C, and input -15C in the spool temp window, expecting a -15C offset to be applied, for a 205C print temp, but the prints till prints at 200C, and the offset window in Octopi - Temperature tab shows 0C offset. I also tried to put the actual temperature I wanted in the spool configuration (205C), but still the same result. Am I using it wrong here, or is it not working properly? I have restarted octoprint, reselected the spool and all other things I can think of.

SirFlour commented 2 years ago

hello, i have the same issue. the offset is not shown in octoprint (eg 170°C) but on the Prusa Display it is shown as 175°C. SO i guess it is working but showing it just wrong. For the normal printing of 215 the offset is included and correctly shown as 220°C. I also wondering if i am missing a Setting or if that could be a bug. I am happy to test anything :)

freezeghost commented 2 years ago

I have similar issue after reboot or restart of octoprint I have to switch off and on again to working propertly.

github-actions[bot] commented 2 years ago

This issue has been automatically marked for closing, because it has not had activity in 30 days. It will be closed if no further activity occurs in 10 days.

github-actions[bot] commented 2 years ago

This issue was closed, because it has been already marked for 10 days with no activity.