Temperature Offset not working

[MarshMalloW0007]

Hello Ollis,

I have tested the temperature offset but it does not work.

I have activated the options in the configuration of the plug-in.

I have indicated the offset in the spool configuration.

The gcode file has a nozzle temperature of 100° and a bed temperature of 10°. I indicate the offsets 110° and 40° to obtain a final temperature of 210° and 50°.

During the preheating, the temperatures are well reached.

But when the printing starts, the temperature of the nozzle goes down to that of the gcode: 100°. Not that of the bed.

The printing is thus impossible.

[MarshMalloW0007]

I did several tests and here is what I found out:

• OctoPrint does not support manual offers greater than 50.
• The bug that I found does not concern this plug-in but directly OctoPrint.

Sorry for the inconvenience.

[cinghialino]

@MarshMalloW0007 is there a way to update the code file temperatures with the ones set for the filament spool upon selection?