search

OnionIoT / Onion-Console

Web application for accessing Onion devices
GNU Affero General Public License v3.0
70 stars 13 forks source link

After flashing the `sysupgrade` does not boot #71

Open iliailia1212 opened 7 years ago

iliailia1212 commented 7 years ago

After flashing the sysupgrade does not start. After power-on, the led is lit for 10 seconds, then 25 seconds flickers and goes out.

The process of updating the firmware, perform the following commands: cd /tmp wget http://repo.onion.io/omega2/images/omega2p-v0.1.10-b163.bin sysupgrade -n omega2p-v0.1.10-b163.bin

Further, it was reported: killall: watchdog: no process killed Sending TERM to remaining processes ... udhcpc ntpd mountd

And then the connection was lost, the led was blinking, after about 2 min went out, after waiting 6 minutes I turned off the power as said in the instructions for omega2+ and switch on the power again.

ZachVan commented 7 years ago

omega2p-v0.1.10-b163.bin was a glitched/bad update omega2p-v0.1.9-b159.bin is the latest working update. If possible re flash with omega2p-v0.1.9-b159.bin. Replay if you need more help. :)