This is a semi-parameterized model (can be adjusted in Fusion360, working on exporting .obj and fusion360 files for those who want to tweak/fix known issues).
This is currently working well but there are some issues that are a result of the requirements I placed on it and the fact that it was mostly designed prior to receiving the actual PCB.
The screen isn't centered. The hardware is centered, but because of the positioning of the actual LCD on the PCB, it's slightly off. This is probably the biggest issue right now that would require some considerable tweaks to get right, possibly necessitating a larger diameter (not really a thing I want since it's already quite wide).
Button tolerances can be optimized (tightened)
Due to inset of USB port and width of the case, to support larger data-capable micro USB cables, there needs to be a considerably large hole in the side. This exposes the internals to rain etc. A shroud built into the movement carrier might work, or something along those lines, for weatherizing
This is a semi-parameterized model (can be adjusted in Fusion360, working on exporting .obj and fusion360 files for those who want to tweak/fix known issues). This is currently working well but there are some issues that are a result of the requirements I placed on it and the fact that it was mostly designed prior to receiving the actual PCB.
Hardware needed:
Known issues: