OpenAgricultureFoundation / gro-hardware

**ALPHA VERSION** All things related to assembling a food computer. CAD Models, Build Manual, Bill of Materials, etc.
201 stars 47 forks source link

Mainframe Assembly Guide Missing PVC Dimensions #6

Open JeremyThiesen opened 8 years ago

JeremyThiesen commented 8 years ago

The Base Board and Motherboard Wall do not have dimensions in the MainFrameAssemblyGuide.pdf

I made some calculations based off of reading the instructions and giving some extra space since I am still awaiting some parts for my build.

Baseboard Length, Requires a 6" L-Bracket and a 24" L-Bracket, and with wiggle room maybee 34-36".

Baseboard Width, Requires 18" L-Bracket. With wiggle room, 20-22".

Motherboard Length, Requires 18" L-Bracket, with wiggle room, 20". Motherboard Width, same as Baseboard, so 20-22".

Is that right?

rklosinski commented 8 years ago

its best to discuss construction on the slack channel I put together. Its monitored by camille and jake, with a few others that have assembled a food computer. register at http://www.plantcubed.com/support/ to obtain access.

AdrianLLu commented 8 years ago

To answer your question, the dimensions are in the .sldprt files. You can view these using the Solidworks viewer, which is called eDrawings. It's free software. This should be the link to the software: https://www.solidworks.com/sw/support/downloads.htm

Here are the dimensions that I used: PVC Base Board, 32.875 in x 21.125 in PVC Motherboard Dock Panel, 31.875 in x 21.375 in PVC Motherboard Panel, 20.75 in x 15.75 in

barwis commented 8 years ago

@rklosinski I've registered like a month ago - never got an access.

rklosinski commented 8 years ago

Oversight on my part. Invite sent.

barwis commented 8 years ago

@rklosinski thank you :)