v3.0.0

Add wifi shield support
- Send channel gains to wifi shield at start of stream
- takes ~4 seconds for the wifi shield to be reachable
Add ability to turn external serial port Serial1 on through commands.
Add ability to use ESP8266 through SPI port.
Change board types on the fly! No longer do you have to upload new code to the Cyton's Pic32 just to do an analog read. You can now read from analog or digital pins with the press send of a code! / now sets the board mode, where:
- BOARD_MODE_DEFAULT is 0
- BOARD_MODE_DEBUG is 1
- BOARD_MODE_ANALOG is 2
- BOARD_MODE_DIGITAL is 3
Add loop function for internal timing operations related to power on reset for wifi shield, remove loop to free up pins and such and remove wifi capability.
Add function to turn time stamps on useTimeStamp(true), time stamps are disabled by default. Note the Wifi shield will use NTP time stamps.
Add wifi commands:
- OpenBCI Wifi Attach - {
- OpenBCI Wifi Remove - }
- OpenBCI Wifi Status - :

hasDataSerial0 and hasDataSerial1 use new properties SerialInfo to determine if data should be received. Now safe to call every loop.

Removed boolean useAccel in support of new mode paradigm. To use the accel, do nothing, it's enabled by default, to not use the accel simply call useAccel(false) and this library will automatically send the contents of auxData array each packet.
Removed OPENBCI_EOP_STND_ACCEL, OPENBCI_EOP_STND_RAW_AUX, OPENBCI_EOP_USER_DEFINED, OPENBCI_EOP_ACCEL_TIME_SET, OPENBCI_EOP_ACCEL_TIME_SYNCED, OPENBCI_EOP_RAW_AUX_TIME_SET, and OPENBCI_EOP_RAW_AUX_TIME_SYNCED in place of enum support replacement: PACKET_TYPE_ACCEL, PACKET_TYPE_RAW_AUX, PACKET_TYPE_USER_DEFINED, PACKET_TYPE_ACCEL_TIME_SET, PACKET_TYPE_ACCEL_TIME_SYNC, PACKET_TYPE_RAW_AUX_TIME_SET, and PACKET_TYPE_RAW_AUX_TIME_SYNC.
Removed sniffMode in place for curBoardMode == OPENBCI_BOARD_MODE_DEBUG
Removed public waitForNewChannelData()
Removed public timeSynced and private sendTimeSyncUpPacket

OpenBCI / OpenBCI_Cyton_Library