search

OpenELEC / OpenELEC.tv

OpenELEC - The living room PC for everyone
http://openelec.tv
1.6k stars 887 forks source link

Request: Pinnacle USB Drivers #110

Closed greatfront7 closed 12 years ago

greatfront7 commented 12 years ago

I would like to request that drivers & firmware be included in the standard openelec install (or instructions for a relevant add-on) to be able to use a Pinnacle 800e USB TV Stick. The current version of the kernel (from daily builds from the end of december) do not seem to support the device.

http://linuxtv.org/wiki/index.php/Pinnacle_PCTV_HD_Pro_Stick_(800e)

sraue commented 12 years ago

can you paste or aattch a "dmesg" and "lsmod" output from a different linux system where this stick works?

greatfront7 commented 12 years ago

DMESG:

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-12-generic (buildd@crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 (Ubuntu 3.0.0-12.20-generic 3.0.4) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=cc13747e-b7bc-4449-b6b2-97fd8b98045d ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Atom PSE erratum detected, BIOS microcode update recommended [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ffa0000 (usable) [ 0.000000] BIOS-e820: 000000006ffa0000 - 000000006ffae000 (ACPI data) [ 0.000000] BIOS-e820: 000000006ffae000 - 000000006fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./ION, BIOS 080015 01/07/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x6ffa0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask 080000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000006ffa0000 [ 0.000000] 0000000000 - 006ffa0000 page 4k [ 0.000000] kernel direct mapping tables up to 6ffa0000 @ 6fc1d000-6ffa0000 [ 0.000000] RAMDISK: 36632000 - 37311000 [ 0.000000] ACPI: RSDP 00000000000faaa0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000006ffa0000 00040 (v01 010711 RSDT1113 20110107 MSFT 00000097) [ 0.000000] ACPI: FACP 000000006ffa0200 00084 (v01 010711 FACP1113 20110107 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000006ffa04a0 0711B (v01 A113P A113PD12 00000D12 INTL 20051117) [ 0.000000] ACPI: FACS 000000006ffae000 00040 [ 0.000000] ACPI: APIC 000000006ffa0390 00080 (v01 010711 APIC1113 20110107 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000006ffa0410 0003C (v01 010711 OEMMCFG 20110107 MSFT 00000097) [ 0.000000] ACPI: WDRT 000000006ffa0450 00047 (v01 010711 NV-WDRT 20110107 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000006ffae040 00079 (v01 010711 OEMB1113 20110107 MSFT 00000097) [ 0.000000] ACPI: HPET 000000006ffaa4a0 00038 (v01 010711 OEMHPET0 20110107 MSFT 00000097) [ 0.000000] ACPI: NVHD 000000006ffae0c0 00284 (v01 010711 NVHDCP 20110107 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000006ffa0000 [ 0.000000] Initmem setup node 0 0000000000000000-000000006ffa0000 [ 0.000000] NODE_DATA [000000006fc18000 - 000000006fc1cfff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0006ffa0 [ 0.000000] On node 0 totalpages: 458543 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6215 pages used for memmap [ 0.000000] DMA32 zone: 448345 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88006fb9d000 s79616 r8192 d22784 u110592 [ 0.000000] pcpu-alloc: s79616 r8192 d22784 u110592 alloc=27*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 452267 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.0.0-12-generic root=UUID=cc13747e-b7bc-4449-b6b2-97fd8b98045d ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 1778328k/1834624k available (6104k kernel code, 452k absent, 55844k reserved, 4880k data, 984k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:16640 nr_irqs:712 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 14680064 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1600.194 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.38 BogoMIPS (lpj=6400776) [ 0.004022] pid_max: default: 32768 minimum: 301 [ 0.004096] Security Framework initialized [ 0.004141] AppArmor: AppArmor initialized [ 0.004145] Yama: becoming mindful. [ 0.004739] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.009219] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.010108] Mount-cache hash table entries: 256 [ 0.010469] Initializing cgroup subsys cpuacct [ 0.010488] Initializing cgroup subsys memory [ 0.010509] Initializing cgroup subsys devices [ 0.010516] Initializing cgroup subsys freezer [ 0.010522] Initializing cgroup subsys net_cls [ 0.010528] Initializing cgroup subsys blkio [ 0.010548] Initializing cgroup subsys perf_event [ 0.010615] Atom PSE erratum detected, BIOS microcode update recommended [ 0.010622] Disabled fast string operations [ 0.010632] CPU: Physical Processor ID: 0 [ 0.010637] CPU: Processor Core ID: 0 [ 0.010642] mce: CPU supports 5 MCE banks [ 0.010659] CPU0: Thermal monitoring enabled (TM1) [ 0.010668] using mwait in idle threads. [ 0.013560] ACPI: Core revision 20110413 [ 0.026191] ftrace: allocating 25651 entries in 101 pages [ 0.028566] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.069473] CPU0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02 [ 0.072003] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver. [ 0.072003] ... version: 3 [ 0.072003] ... bit width: 40 [ 0.072003] ... generic registers: 2 [ 0.072003] ... value mask: 000000ffffffffff [ 0.072003] ... max period: 000000007fffffff [ 0.072003] ... fixed-purpose events: 3 [ 0.072003] ... event mask: 0000000700000003 [ 0.072003] Booting Node 0, Processors #1 [ 0.072003] smpboot cpu 1: start_ip = 9a000 [ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended [ 0.008000] Disabled fast string operations [ 0.164268] #2 [ 0.164274] smpboot cpu 2: start_ip = 9a000 [ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended [ 0.008000] Disabled fast string operations [ 0.256308] #3 Ok. [ 0.256314] smpboot cpu 3: start_ip = 9a000 [ 0.008000] Atom PSE erratum detected, BIOS microcode update recommended [ 0.008000] Disabled fast string operations [ 0.348047] Brought up 4 CPUs [ 0.348055] Total of 4 processors activated (12800.23 BogoMIPS). [ 0.350488] devtmpfs: initialized [ 0.350488] PM: Registering ACPI NVS region at 6ffae000 (270336 bytes) [ 0.356324] print_constraints: dummy: [ 0.356398] Time: 20:05:40 Date: 01/22/12 [ 0.356504] NET: Registered protocol family 16 [ 0.356534] Trying to unpack rootfs image as initramfs... [ 0.356946] ACPI: bus type pci registered [ 0.357148] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff](base 0xfc000000) [ 0.357158] PCI: not using MMCONFIG [ 0.357165] PCI: Using configuration type 1 for base access [ 0.360259] bio: create slab at 0 [ 0.366558] ACPI: EC: Look up EC in DSDT [ 0.373190] ACPI: Executed 1 blocks of module-level executable AML code [ 0.383640] ACPI: Interpreter enabled [ 0.383654] ACPI: (supports S0 S1 S3 S4 S5) [ 0.383743] ACPI: Using IOAPIC for interrupt routing [ 0.383852] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff](base 0xfc000000) [ 0.388502] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources [ 0.426358] ACPI: No dock devices found. [ 0.426369] HEST: Table not found. [ 0.426381] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.427337] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-ff]) [ 0.428279] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.428290] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.428300] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.428309] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.428318] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfbffffff] [ 0.428327] pci_root PNP0A03:00: host bridge window [mem 0xfe000000-0xfebfffff] [ 0.428369] pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600 [ 0.428502] pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500 [ 0.428688] pci 0000:00:03.0: [10de:0aad] type 0 class 0x000601 [ 0.428709] pci 0000:00:03.0: reg 10: [io 0x4f00-0x4fff] [ 0.428794] pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500 [ 0.428920] pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05 [ 0.428947] pci 0000:00:03.2: reg 10: [io 0x4900-0x493f] [ 0.428987] pci 0000:00:03.2: reg 20: [io 0x4d00-0x4d3f] [ 0.429003] pci 0000:00:03.2: reg 24: [io 0x4e00-0x4e3f] [ 0.429045] pci 0000:00:03.2: PME# supported from D3hot D3cold [ 0.429058] pci 0000:00:03.2: PME# disabled [ 0.429092] pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500 [ 0.429287] pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40 [ 0.429318] pci 0000:00:03.5: reg 10: [mem 0xfae80000-0xfaefffff] [ 0.429475] pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03 [ 0.429500] pci 0000:00:04.0: reg 10: [mem 0xfae7f000-0xfae7ffff] [ 0.429579] pci 0000:00:04.0: supports D1 D2 [ 0.429587] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.429598] pci 0000:00:04.0: PME# disabled [ 0.429629] pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03 [ 0.429657] pci 0000:00:04.1: reg 10: [mem 0xfae7ec00-0xfae7ecff] [ 0.429739] pci 0000:00:04.1: supports D1 D2 [ 0.429747] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.429757] pci 0000:00:04.1: PME# disabled [ 0.429800] pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03 [ 0.429825] pci 0000:00:06.0: reg 10: [mem 0xfae7d000-0xfae7dfff] [ 0.429898] pci 0000:00:06.0: supports D1 D2 [ 0.429905] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.429915] pci 0000:00:06.0: PME# disabled [ 0.429945] pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03 [ 0.429972] pci 0000:00:06.1: reg 10: [mem 0xfae7e800-0xfae7e8ff] [ 0.430053] pci 0000:00:06.1: supports D1 D2 [ 0.430061] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.430071] pci 0000:00:06.1: PME# disabled [ 0.430114] pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403 [ 0.430138] pci 0000:00:08.0: reg 10: [mem 0xfae78000-0xfae7bfff] [ 0.430212] pci 0000:00:08.0: PME# supported from D3hot D3cold [ 0.430222] pci 0000:00:08.0: PME# disabled [ 0.430252] pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604 [ 0.430339] pci 0000:00:0a.0: [10de:0ab0] type 0 class 0x000200 [ 0.430365] pci 0000:00:0a.0: reg 10: [mem 0xfae7c000-0xfae7cfff] [ 0.430381] pci 0000:00:0a.0: reg 14: [io 0xd080-0xd087] [ 0.430396] pci 0000:00:0a.0: reg 18: [mem 0xfae7e400-0xfae7e4ff] [ 0.430412] pci 0000:00:0a.0: reg 1c: [mem 0xfae7e000-0xfae7e00f] [ 0.430462] pci 0000:00:0a.0: supports D1 D2 [ 0.430470] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.430481] pci 0000:00:0a.0: PME# disabled [ 0.430521] pci 0000:00:0b.0: [10de:0ab4] type 0 class 0x000101 [ 0.430548] pci 0000:00:0b.0: reg 10: [io 0xd000-0xd007] [ 0.430564] pci 0000:00:0b.0: reg 14: [io 0xcc00-0xcc03] [ 0.430579] pci 0000:00:0b.0: reg 18: [io 0xc880-0xc887] [ 0.430594] pci 0000:00:0b.0: reg 1c: [io 0xc800-0xc803] [ 0.430609] pci 0000:00:0b.0: reg 20: [io 0xc480-0xc48f] [ 0.430625] pci 0000:00:0b.0: reg 24: [mem 0xfae76000-0xfae77fff] [ 0.430727] pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604 [ 0.430930] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.430944] pci 0000:00:0c.0: PME# disabled [ 0.431014] pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604 [ 0.431079] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.431089] pci 0000:00:10.0: PME# disabled [ 0.431169] pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604 [ 0.431382] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.431399] pci 0000:00:15.0: PME# disabled [ 0.431498] pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604 [ 0.431700] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.431715] pci 0000:00:16.0: PME# disabled [ 0.431813] pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604 [ 0.432057] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.432074] pci 0000:00:17.0: PME# disabled [ 0.432176] pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604 [ 0.432380] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.432395] pci 0000:00:18.0: PME# disabled [ 0.432540] pci 0000:00:09.0: PCI bridge to [bus 01-01](subtractive decode) [ 0.432553] pci 0000:00:09.0: bridge window io 0xf000-0x0000 [ 0.432564] pci 0000:00:09.0: bridge window mem 0xfff00000-0x000fffff [ 0.432576] pci 0000:00:09.0: bridge window mem 0xfff00000-0x000fffff pref [ 0.432588] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7](subtractive decode) [ 0.432598] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff](subtractive decode) [ 0.432608] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff](subtractive decode) [ 0.432620] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000dffff](subtractive decode) [ 0.432631] pci 0000:00:09.0: bridge window [mem 0x80000000-0xfbffffff](subtractive decode) [ 0.432641] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfebfffff](subtractive decode) [ 0.432815] pci 0000:00:0c.0: PCI bridge to [bus 02-02] [ 0.432839] pci 0000:00:0c.0: bridge window io 0xf000-0x0000 [ 0.432855] pci 0000:00:0c.0: bridge window mem 0xfff00000-0x000fffff [ 0.432878] pci 0000:00:0c.0: bridge window mem 0xfff00000-0x000fffff pref [ 0.432948] pci 0000:03:00.0: [10de:087d] type 0 class 0x000300 [ 0.432978] pci 0000:03:00.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.433002] pci 0000:03:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.433025] pci 0000:03:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit pref] [ 0.433043] pci 0000:03:00.0: reg 24: [io 0xec00-0xec7f] [ 0.433061] pci 0000:03:00.0: reg 30: [mem 0xfafe0000-0xfaffffff pref] [ 0.433150] pci 0000:00:10.0: PCI bridge to [bus 03-03] [ 0.433162] pci 0000:00:10.0: bridge window [io 0xe000-0xefff] [ 0.433173] pci 0000:00:10.0: bridge window [mem 0xfaf00000-0xfbffffff] [ 0.433186] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf9ffffff 64bit pref] [ 0.433387] pci 0000:04:00.0: [168c:002b] type 0 class 0x000280 [ 0.433425] pci 0000:04:00.0: reg 10: [mem 0xfebf0000-0xfebfffff 64bit] [ 0.433530] pci 0000:04:00.0: supports D1 [ 0.433539] pci 0000:04:00.0: PME# supported from D0 D1 D3hot D3cold [ 0.433550] pci 0000:04:00.0: PME# disabled [ 0.440103] pci 0000:00:15.0: PCI bridge to [bus 04-04] [ 0.440130] pci 0000:00:15.0: bridge window io 0xf000-0x0000 [ 0.440148] pci 0000:00:15.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.440173] pci 0000:00:15.0: bridge window mem 0xfff00000-0x000fffff pref [ 0.440373] pci 0000:00:16.0: PCI bridge to [bus 05-05] [ 0.440396] pci 0000:00:16.0: bridge window io 0xf000-0x0000 [ 0.440412] pci 0000:00:16.0: bridge window mem 0xfff00000-0x000fffff [ 0.440435] pci 0000:00:16.0: bridge window mem 0xfff00000-0x000fffff pref [ 0.440606] pci 0000:00:17.0: PCI bridge to [bus 06-06] [ 0.440628] pci 0000:00:17.0: bridge window io 0xf000-0x0000 [ 0.440643] pci 0000:00:17.0: bridge window mem 0xfff00000-0x000fffff [ 0.440666] pci 0000:00:17.0: bridge window mem 0xfff00000-0x000fffff pref [ 0.440842] pci 0000:00:18.0: PCI bridge to [bus 07-07] [ 0.440865] pci 0000:00:18.0: bridge window io 0xf000-0x0000 [ 0.440881] pci 0000:00:18.0: bridge window mem 0xfff00000-0x000fffff [ 0.440904] pci 0000:00:18.0: bridge window mem 0xfff00000-0x000fffff pref [ 0.441009] ACPI: PCI Interrupt Routing Table [SB.PCI0._PRT] [ 0.441545] ACPI: PCI Interrupt Routing Table [SB.PCI0.PBB0._PRT] [ 0.441737] ACPI: PCI Interrupt Routing Table [SB.PCI0.IXVE._PRT] [ 0.441856] ACPI: PCI Interrupt Routing Table [SB.PCI0.XVR0._PRT] [ 0.442042] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P6._PRT] [ 0.442190] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P7._PRT] [ 0.442332] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P8._PRT] [ 0.442497] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P9._PRT] [ 0.443068] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.443892] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c [ 0.443900] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.477891] ACPI: PCI Interrupt Link [LNKA](IRQs 16 17 18 19) 0, disabled. [ 0.478323] ACPI: PCI Interrupt Link [LNKB](IRQs 16 17 18 19) 0, disabled. [ 0.478756] ACPI: PCI Interrupt Link [LNKC](IRQs 16 17 18 19) 0, disabled. [ 0.479172] ACPI: PCI Interrupt Link [LNKD](IRQs 16 17 18 19) 0, disabled. [ 0.479599] ACPI: PCI Interrupt Link [LN0A](IRQs 16 17 18 19) 0, disabled. [ 0.480059] ACPI: PCI Interrupt Link [LN0B](IRQs 16 17 18 19) 0, disabled. [ 0.480504] ACPI: PCI Interrupt Link [LN0C](IRQs 16 17 18 19) 0, disabled. [ 0.480923] ACPI: PCI Interrupt Link [LN0D](IRQs 16 17 18 19) 0, disabled. [ 0.481350] ACPI: PCI Interrupt Link [LN1A](IRQs 16 17 18 19) 0, disabled. [ 0.481767] ACPI: PCI Interrupt Link [LN1B](IRQs 16 17 18 19) 0, disabled. [ 0.482196] ACPI: PCI Interrupt Link [LN1C](IRQs 16 17 18 19) 0, disabled. [ 0.482619] ACPI: PCI Interrupt Link [LN1D](IRQs 16 17 18 19) 0, disabled. [ 0.483110] ACPI: PCI Interrupt Link [LN2A](IRQs 16 17 18 19) 0, disabled. [ 0.483541] ACPI: PCI Interrupt Link [LN2B](IRQs 16 17 18 19) 0, disabled. [ 0.483996] ACPI: PCI Interrupt Link [LN2C](IRQs 16 17 18 19) 0, disabled. [ 0.484482] ACPI: PCI Interrupt Link [LN2D](IRQs 16 17 18 19) 0, disabled. [ 0.484928] ACPI: PCI Interrupt Link [LN3A](IRQs 16 17 18 19) 11 [ 0.485364] ACPI: PCI Interrupt Link [LN3B](IRQs 16 17 18 19) 0, disabled. [ 0.485800] ACPI: PCI Interrupt Link [LN3C](IRQs 16 17 18 19) 0, disabled. [ 0.486251] ACPI: PCI Interrupt Link [LN3D](IRQs 16 17 18 19) 0, disabled. [ 0.486700] ACPI: PCI Interrupt Link [LN4A](IRQs 16 17 18 19) 0, disabled. [ 0.487168] ACPI: PCI Interrupt Link [LN4B](IRQs 16 17 18 19) 0, disabled. [ 0.487634] ACPI: PCI Interrupt Link [LN4C](IRQs 16 17 18 19) 0, disabled. [ 0.488105] ACPI: PCI Interrupt Link [LN4D](IRQs 16 17 18 19) 0, disabled. [ 0.488559] ACPI: PCI Interrupt Link [LN5A](IRQs 16 17 18 19) 0, disabled. [ 0.488990] ACPI: PCI Interrupt Link [LN5B](IRQs 16 17 18 19) 0, disabled. [ 0.489425] ACPI: PCI Interrupt Link [LN5C](IRQs 16 17 18 19) 0, disabled. [ 0.489859] ACPI: PCI Interrupt Link [LN5D](IRQs 16 17 18 19) 0, disabled. [ 0.490306] ACPI: PCI Interrupt Link [LN6A](IRQs 16 17 18 19) 0, disabled. [ 0.490737] ACPI: PCI Interrupt Link [LN6B](IRQs 16 17 18 19) 0, disabled. [ 0.491190] ACPI: PCI Interrupt Link [LN6C](IRQs 16 17 18 19) 0, disabled. [ 0.491636] ACPI: PCI Interrupt Link [LN6D](IRQs 16 17 18 19) 0, disabled. [ 0.492147] ACPI: PCI Interrupt Link [LUB0](IRQs 20 21 22 23) 15 [ 0.492617] ACPI: PCI Interrupt Link [LUB2](IRQs 20 21 22 23) 10 [ 0.493058] ACPI: PCI Interrupt Link [LMAC](IRQs 20 21 22 23) 10 [ 0.493520] ACPI: PCI Interrupt Link [LAZA](IRQs 20 21 22 23) 15 [ 0.493966] ACPI: PCI Interrupt Link [SGRU](IRQs 20 21 22 23) 10 [ 0.494415] ACPI: PCI Interrupt Link [LSMB](IRQs 20 21 22 23) 11 [ 0.494869] ACPI: PCI Interrupt Link [LPMU](IRQs 20 21 22 23) 9 [ 0.495326] ACPI: PCI Interrupt Link [LSA0](IRQs 20 21 22 23) 5 [ 0.495841] ACPI: PCI Interrupt Link [LATA](IRQs 20 21 22 23) 0, disabled. [ 0.496347] ACPI: PCI Interrupt Link [UB11](IRQs 20 21 22 23) 11 [ 0.496795] ACPI: PCI Interrupt Link [UB12](IRQs 20 21 22 23) 9 [ 0.497248] ACPI: PCI Interrupt Link [LRP0](IRQs 20 21 22 23) 10 [ 0.497702] ACPI: PCI Interrupt Link [LRP1](IRQs 20 21 22 23) 0, disabled. [ 0.498154] ACPI: PCI Interrupt Link [LRP2](IRQs 20 21 22 23) 0, disabled. [ 0.498623] ACPI: PCI Interrupt Link [LRP3](IRQs 20 21 22 23) 11 [ 0.499120] ACPI: PCI Interrupt Link [LRP4](IRQs 20 21 22 23) 9 [ 0.499585] ACPI: PCI Interrupt Link [LRP5](IRQs 20 21 22 23) 15 [ 0.500101] ACPI: PCI Interrupt Link [LRP6](IRQs 20 21 22 23) 14 [ 0.500498] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.500510] vgaarb: loaded [ 0.500516] vgaarb: bridge control possible 0000:03:00.0 [ 0.501212] SCSI subsystem initialized [ 0.501343] libata version 3.00 loaded. [ 0.501343] usbcore: registered new interface driver usbfs [ 0.501343] usbcore: registered new interface driver hub [ 0.501343] usbcore: registered new device driver usb [ 0.501343] PCI: Using ACPI for IRQ routing [ 0.501343] PCI: pci_cache_line_size set to 64 bytes [ 0.501383] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.501392] reserve RAM buffer: 000000006ffa0000 - 000000006fffffff [ 0.501751] NetLabel: Initializing [ 0.501759] NetLabel: domain hash size = 128 [ 0.501764] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.501797] NetLabel: unlabeled traffic allowed by default [ 0.501955] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.501970] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31 [ 0.501987] hpet0: 4 comparators, 64-bit 25.000000 MHz counter [ 0.516133] Switching to clocksource hpet [ 0.519139] Switched to NOHz mode on CPU #0 [ 0.519230] Switched to NOHz mode on CPU #2 [ 0.519280] Switched to NOHz mode on CPU #3 [ 0.519310] Switched to NOHz mode on CPU #1 [ 0.538193] AppArmor: AppArmor Filesystem Enabled [ 0.538277] pnp: PnP ACPI init [ 0.538319] ACPI: bus type pnp registered [ 0.538709] pnp 00:00: [bus 00-ff] [ 0.538718] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.538724] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.538730] pnp 00:00: [io 0x0d00-0xffff window] [ 0.538737] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.538743] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.538749] pnp 00:00: [mem 0x80000000-0xfbffffff window] [ 0.538756] pnp 00:00: [mem 0xfe000000-0xfebfffff window] [ 0.538924] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.539123] pnp 00:01: [io 0x03f8-0x03ff] [ 0.539149] pnp 00:01: [irq 4] [ 0.539155] pnp 00:01: [dma 0 disabled] [ 0.539253] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.539291] pnp 00:02: [dma 4] [ 0.539297] pnp 00:02: [io 0x0000-0x000f] [ 0.539302] pnp 00:02: [io 0x0081-0x0083] [ 0.539308] pnp 00:02: [io 0x0087] [ 0.539313] pnp 00:02: [io 0x0089-0x008b] [ 0.539318] pnp 00:02: [io 0x008f] [ 0.539323] pnp 00:02: [io 0x00c0-0x00df] [ 0.539380] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.539408] pnp 00:03: [io 0x0061] [ 0.539465] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.539493] pnp 00:04: [io 0x00f0-0x00ff] [ 0.539508] pnp 00:04: [irq 13] [ 0.539571] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.541207] pnp 00:05: [mem 0x000d0000-0x000d3fff window] [ 0.541217] pnp 00:05: [mem 0x000d4000-0x000d7fff window] [ 0.541223] pnp 00:05: [mem 0x000de000-0x000dffff window] [ 0.541230] pnp 00:05: [io 0x0010-0x001f] [ 0.541235] pnp 00:05: [io 0x0022-0x003f] [ 0.541241] pnp 00:05: [io 0x0044-0x004d] [ 0.541246] pnp 00:05: [io 0x0050-0x005f] [ 0.541251] pnp 00:05: [io 0x0062-0x0063] [ 0.541256] pnp 00:05: [io 0x0065-0x006f] [ 0.541262] pnp 00:05: [io 0x0072-0x007f] [ 0.541267] pnp 00:05: [io 0x0080] [ 0.541279] pnp 00:05: [io 0x0084-0x0086] [ 0.541284] pnp 00:05: [io 0x0088] [ 0.541289] pnp 00:05: [io 0x008c-0x008e] [ 0.541294] pnp 00:05: [io 0x0090-0x009f] [ 0.541300] pnp 00:05: [io 0x00a2-0x00bf] [ 0.541305] pnp 00:05: [io 0x00e0-0x00ef] [ 0.541311] pnp 00:05: [io 0x04d0-0x04d1] [ 0.541316] pnp 00:05: [io 0x0800-0x080f] [ 0.541321] pnp 00:05: [io 0x4000-0x407f] [ 0.541327] pnp 00:05: [io 0x4080-0x40ff] [ 0.541332] pnp 00:05: [io 0x4400-0x447f] [ 0.541338] pnp 00:05: [io 0x4480-0x44ff] [ 0.541343] pnp 00:05: [io 0x4800-0x487f] [ 0.541348] pnp 00:05: [io 0x4880-0x48ff] [ 0.541355] pnp 00:05: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.541361] pnp 00:05: [mem 0xfefe2000-0xfefe3fff] [ 0.541367] pnp 00:05: [mem 0xfefe1000-0xfefe1fff] [ 0.541372] pnp 00:05: [mem 0xfee01000-0xfeefffff] [ 0.541556] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.541565] system 00:05: [io 0x0800-0x080f] has been reserved [ 0.541572] system 00:05: [io 0x4000-0x407f] has been reserved [ 0.541579] system 00:05: [io 0x4080-0x40ff] has been reserved [ 0.541586] system 00:05: [io 0x4400-0x447f] has been reserved [ 0.541593] system 00:05: [io 0x4480-0x44ff] has been reserved [ 0.541600] system 00:05: [io 0x4800-0x487f] has been reserved [ 0.541607] system 00:05: [io 0x4880-0x48ff] has been reserved [ 0.541616] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved [ 0.541624] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved [ 0.541631] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved [ 0.541639] system 00:05: [mem 0xfefe2000-0xfefe3fff] has been reserved [ 0.541647] system 00:05: [mem 0xfefe1000-0xfefe1fff] has been reserved [ 0.541655] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved [ 0.541664] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.541977] pnp 00:06: [mem 0xfed00000-0xfed00fff] [ 0.541984] pnp 00:06: [irq 2 disabled] [ 0.542004] pnp 00:06: [irq 8] [ 0.542070] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.542157] pnp 00:07: [io 0x0070-0x0071] [ 0.542220] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.542474] pnp 00:08: [io 0x0060] [ 0.542481] pnp 00:08: [io 0x0064] [ 0.542487] pnp 00:08: [mem 0xfec00000-0xfec00fff] [ 0.542493] pnp 00:08: [mem 0xfee00000-0xfee00fff] [ 0.542606] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.542615] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.542624] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.543052] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled] [ 0.543060] pnp 00:09: [io 0x0a00-0x0a0f] [ 0.543065] pnp 00:09: [io 0x0a10-0x0a1f] [ 0.543184] system 00:09: [io 0x0a00-0x0a0f] has been reserved [ 0.543192] system 00:09: [io 0x0a10-0x0a1f] has been reserved [ 0.543201] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.543360] pnp 00:0a: [mem 0xfc000000-0xfdffffff] [ 0.543471] system 00:0a: [mem 0xfc000000-0xfdffffff] has been reserved [ 0.543481] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.543986] pnp 00:0b: [mem 0x00000000-0x0009ffff] [ 0.543994] pnp 00:0b: [mem 0x000c0000-0x000cffff] [ 0.544050] pnp 00:0b: [mem 0x000e0000-0x000fffff] [ 0.544059] pnp 00:0b: [mem 0x00100000-0x7fffffff] [ 0.544067] pnp 00:0b: [mem 0xfec00000-0xffffffff] [ 0.544233] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.544242] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.544250] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.544257] system 00:0b: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.544265] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved [ 0.544274] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.546513] pnp: PnP ACPI: found 12 devices [ 0.546519] ACPI: ACPI bus type pnp unregistered [ 0.555596] PCI: max bus depth: 1 pci_try_num: 2 [ 0.555740] pci 0000:00:09.0: PCI bridge to [bus 01-01] [ 0.555746] pci 0000:00:09.0: bridge window [io disabled] [ 0.555754] pci 0000:00:09.0: bridge window [mem disabled] [ 0.555761] pci 0000:00:09.0: bridge window [mem pref disabled] [ 0.555771] pci 0000:00:0c.0: PCI bridge to [bus 02-02] [ 0.555776] pci 0000:00:0c.0: bridge window [io disabled] [ 0.555791] pci 0000:00:0c.0: bridge window [mem disabled] [ 0.555802] pci 0000:00:0c.0: bridge window [mem pref disabled] [ 0.555821] pci 0000:00:10.0: PCI bridge to [bus 03-03] [ 0.555829] pci 0000:00:10.0: bridge window [io 0xe000-0xefff] [ 0.555837] pci 0000:00:10.0: bridge window [mem 0xfaf00000-0xfbffffff] [ 0.555846] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf9ffffff 64bit pref] [ 0.555856] pci 0000:00:15.0: PCI bridge to [bus 04-04] [ 0.555861] pci 0000:00:15.0: bridge window [io disabled] [ 0.555876] pci 0000:00:15.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.555888] pci 0000:00:15.0: bridge window [mem pref disabled] [ 0.555906] pci 0000:00:16.0: PCI bridge to [bus 05-05] [ 0.555911] pci 0000:00:16.0: bridge window [io disabled] [ 0.555925] pci 0000:00:16.0: bridge window [mem disabled] [ 0.555936] pci 0000:00:16.0: bridge window [mem pref disabled] [ 0.555955] pci 0000:00:17.0: PCI bridge to [bus 06-06] [ 0.555959] pci 0000:00:17.0: bridge window [io disabled] [ 0.555974] pci 0000:00:17.0: bridge window [mem disabled] [ 0.555985] pci 0000:00:17.0: bridge window [mem pref disabled] [ 0.556034] pci 0000:00:18.0: PCI bridge to [bus 07-07] [ 0.556042] pci 0000:00:18.0: bridge window [io disabled] [ 0.556057] pci 0000:00:18.0: bridge window [mem disabled] [ 0.556068] pci 0000:00:18.0: bridge window [mem pref disabled] [ 0.556104] pci 0000:00:09.0: setting latency timer to 64 [ 0.556699] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23 [ 0.556742] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23 [ 0.556757] pci 0000:00:0c.0: setting latency timer to 64 [ 0.556773] pci 0000:00:10.0: setting latency timer to 64 [ 0.557261] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22 [ 0.557283] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22 [ 0.557297] pci 0000:00:15.0: setting latency timer to 64 [ 0.557784] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21 [ 0.557806] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21 [ 0.557820] pci 0000:00:16.0: setting latency timer to 64 [ 0.558308] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20 [ 0.558330] pci 0000:00:17.0: PCI INT A -> Link[LRP5] -> GSI 20 (level, low) -> IRQ 20 [ 0.558344] pci 0000:00:17.0: setting latency timer to 64 [ 0.558832] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23 [ 0.558842] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 23 (level, low) -> IRQ 23 [ 0.558856] pci 0000:00:18.0: setting latency timer to 64 [ 0.558869] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.558875] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.558882] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.558888] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.558895] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfbffffff] [ 0.558901] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff] [ 0.558909] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.558915] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.558922] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.558928] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff] [ 0.558934] pci_bus 0000:01: resource 8 [mem 0x80000000-0xfbffffff] [ 0.558941] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff] [ 0.558948] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.558954] pci_bus 0000:03: resource 1 [mem 0xfaf00000-0xfbffffff] [ 0.558961] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf9ffffff 64bit pref] [ 0.558968] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.559077] NET: Registered protocol family 2 [ 0.559348] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.561421] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.565238] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.566117] TCP: Hash tables configured (established 262144 bind 65536) [ 0.566125] TCP reno registered [ 0.566152] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.566201] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.566519] NET: Registered protocol family 1 [ 0.732340] pci 0000:03:00.0: Boot video device [ 0.732355] PCI: CLS 64 bytes, default 64 [ 0.733390] audit: initializing netlink socket (disabled) [ 0.733416] type=2000 audit(1327262740.728:1): initialized [ 0.784254] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.789033] VFS: Disk quotas dquot_6.5.2 [ 0.789186] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.791019] fuse init (API version 7.16) [ 0.791282] msgmni has been set to 3473 [ 0.792670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.792773] io scheduler noop registered [ 0.792781] io scheduler deadline registered [ 0.792907] io scheduler cfq registered (default) [ 0.793911] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.793981] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.794105] intel_idle: MWAIT substates: 0x10 [ 0.794137] intel_idle: v0.4 model 0x1C [ 0.794141] intel_idle: lapic_timer_reliable_states 0x2 [ 0.794433] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.794448] ACPI: Power Button [PWRB] [ 0.794570] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.794580] ACPI: Power Button [PWRF] [ 0.794655] ACPI: acpi_idle yielding to intel_idle [ 0.804706] ERST: Table is not found! [ 0.804950] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.825311] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.059816] Freeing initrd memory: 13180k freed [ 1.141395] 00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.142324] Linux agpgart interface v0.103 [ 1.145377] brd: module loaded [ 1.146768] loop: module loaded [ 1.147753] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 22 [ 1.147768] pata_acpi 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22 [ 1.147826] pata_acpi 0000:00:0b.0: setting latency timer to 64 [ 1.147854] pata_acpi 0000:00:0b.0: PCI INT A disabled [ 1.148728] Fixed MDIO Bus: probed [ 1.148791] PPP generic driver version 2.4.2 [ 1.148937] tun: Universal TUN/TAP device driver, 1.6 [ 1.148942] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 1.149185] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.149741] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21 [ 1.149754] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21 [ 1.149791] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 1.149798] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 1.149908] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1 [ 1.149951] ehci_hcd 0000:00:04.1: debug port 1 [ 1.149965] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 1.150008] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfae7ec00 [ 1.160037] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 1.160379] hub 1-0:1.0: USB hub found [ 1.160392] hub 1-0:1.0: 6 ports detected [ 1.161070] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20 [ 1.161082] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 20 (level, low) -> IRQ 20 [ 1.161116] ehci_hcd 0000:00:06.1: setting latency timer to 64 [ 1.161124] ehci_hcd 0000:00:06.1: EHCI Host Controller [ 1.161267] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2 [ 1.161313] ehci_hcd 0000:00:06.1: debug port 1 [ 1.161328] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported [ 1.161375] ehci_hcd 0000:00:06.1: irq 20, io mem 0xfae7e800 [ 1.172032] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00 [ 1.172348] hub 2-0:1.0: USB hub found [ 1.172361] hub 2-0:1.0: 6 ports detected [ 1.172530] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.173089] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 1.173101] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 1.173137] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.173145] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.173270] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3 [ 1.173331] ohci_hcd 0000:00:04.0: irq 23, io mem 0xfae7f000 [ 1.230306] hub 3-0:1.0: USB hub found [ 1.230321] hub 3-0:1.0: 6 ports detected [ 1.230992] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 22 [ 1.231004] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 22 (level, low) -> IRQ 22 [ 1.231037] ohci_hcd 0000:00:06.0: setting latency timer to 64 [ 1.231045] ohci_hcd 0000:00:06.0: OHCI Host Controller [ 1.231175] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4 [ 1.231233] ohci_hcd 0000:00:06.0: irq 22, io mem 0xfae7d000 [ 1.286329] hub 4-0:1.0: USB hub found [ 1.286344] hub 4-0:1.0: 6 ports detected [ 1.286506] uhci_hcd: USB Universal Host Controller Interface driver [ 1.286701] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.288237] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.288256] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.288574] mousedev: PS/2 mouse device common for all mice [ 1.288884] rtc_cmos 00:07: RTC can wake from S4 [ 1.289143] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.289208] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.289501] device-mapper: uevent: version 1.0.3 [ 1.289725] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 1.289883] cpuidle: using governor ladder [ 1.290118] cpuidle: using governor menu [ 1.290124] EFI Variables Facility v0.08 2004-May-17 [ 1.290746] TCP cubic registered [ 1.291094] NET: Registered protocol family 10 [ 1.292357] NET: Registered protocol family 17 [ 1.292410] Registering the dns_resolver key type [ 1.292758] PM: Hibernation image not present or could not be loaded. [ 1.292786] registered taskstats version 1 [ 1.311177] Magic number: 12:257:94 [ 1.311406] rtc_cmos 00:07: setting system clock to 2012-01-22 20:05:41 UTC (1327262741) [ 1.311476] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.311482] EDD information not available. [ 1.311959] Freeing unused kernel memory: 984k freed [ 1.312691] Write protecting the kernel read-only data: 10240k [ 1.313527] Freeing unused kernel memory: 20k freed [ 1.326790] Freeing unused kernel memory: 1400k freed [ 1.379600] udevd[87]: starting version 173 [ 1.472206] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 1.589244] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.590227] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 21 [ 1.590250] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 21 (level, low) -> IRQ 21 [ 1.590267] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 1.606248] hub 1-1:1.0: USB hub found [ 1.606446] hub 1-1:1.0: 6 ports detected [ 1.654558] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:01:2e:2b:ff:51 [ 1.654574] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3 [ 1.654676] ahci 0000:00:0b.0: version 3.0 [ 1.654716] ahci 0000:00:0b.0: PCI INT A -> Link[LSA0] -> GSI 22 (level, low) -> IRQ 22 [ 1.654863] ahci 0000:00:0b.0: irq 40 for MSI/MSI-X [ 1.654884] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP [ 1.655044] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode [ 1.655057] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pio slum part sxs [ 1.655072] ahci 0000:00:0b.0: setting latency timer to 64 [ 1.658331] scsi0 : ahci [ 1.658813] scsi1 : ahci [ 1.659159] scsi2 : ahci [ 1.659506] scsi3 : ahci [ 1.659767] scsi4 : ahci [ 1.660340] scsi5 : ahci [ 1.661834] ata1: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76100 irq 40 [ 1.661847] ata2: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76180 irq 40 [ 1.661857] ata3: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76200 irq 40 [ 1.661884] ata4: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76280 irq 40 [ 1.661895] ata5: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76300 irq 40 [ 1.661906] ata6: SATA max UDMA/133 abar m8192@0xfae76000 port 0xfae76380 irq 40 [ 1.716053] usb 1-2: new high speed USB device number 3 using ehci_hcd [ 1.732046] Refined TSC clocksource calibration: 1599.992 MHz. [ 1.732061] Switching to clocksource tsc [ 1.945187] usb 1-1.2: new low speed USB device number 4 using ehci_hcd [ 1.980051] ata5: SATA link down (SStatus 0 SControl 300) [ 1.980090] ata3: SATA link down (SStatus 0 SControl 300) [ 1.980116] ata6: SATA link down (SStatus 0 SControl 300) [ 1.980147] ata2: SATA link down (SStatus 0 SControl 300) [ 1.980173] ata4: SATA link down (SStatus 0 SControl 300) [ 1.980202] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.989720] ata1.00: ATA-8: SAMSUNG HM161HI, 2AC101C4, max UDMA/133 [ 1.989729] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.999248] ata1.00: configured for UDMA/133 [ 1.999554] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM161HI 2AC1 PQ: 0 ANSI: 5 [ 2.000172] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.000196] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.000391] sd 0:0:0:0: [sda] Write Protect is off [ 2.000402] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.000493] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.050327] sda: sda1 sda2 < sda5 > [ 2.051174] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.076609] usbcore: registered new interface driver usbhid [ 2.076619] usbhid: USB HID core driver [ 2.087873] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.0/input/input2 [ 2.088384] logitech 0003:046D:C30A.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:04.1-1.2/input0 [ 2.097955] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.2/1-1.2:1.1/input/input3 [ 2.098495] logitech 0003:046D:C30A.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Logitech USB Keyboard] on usb-0000:00:04.1-1.2/input1 [ 2.137198] usb 1-1.3: new low speed USB device number 5 using ehci_hcd [ 2.425698] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.459796] input: HID 0461:4d09 as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1.3/1-1.3:1.0/input/input4 [ 2.460159] generic-usb 0003:0461:4D09.0003: input,hidraw2: USB HID v1.00 Mouse [HID 0461:4d09] on usb-0000:00:04.1-1.3/input0 [ 14.739502] udevd[344]: starting version 173 [ 14.803988] lp: driver loaded but no devices found [ 14.819392] Adding 1832956k swap on /dev/sda5. Priority:-1 extents:1 across:1832956k [ 14.877008] i2c i2c-0: nForce2 SMBus adapter at 0x4d00 [ 14.877306] i2c i2c-1: nForce2 SMBus adapter at 0x4e00 [ 15.045237] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 15.047386] wmi: Mapper loaded [ 15.250096] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.253926] nvidia: module license 'NVIDIA' taints kernel. [ 15.253938] Disabling lock debugging due to kernel taint [ 15.305662] cfg80211: Calling CRDA to update world regulatory domain [ 15.387335] type=1400 audit(1327262755.571:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=573 comm="apparmor_parser" [ 15.388798] type=1400 audit(1327262755.575:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=573 comm="apparmor_parser" [ 15.389705] type=1400 audit(1327262755.575:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=573 comm="apparmor_parser" [ 15.415229] type=1400 audit(1327262755.599:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=596 comm="apparmor_parser" [ 15.427490] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 19 [ 15.427544] ath9k 0000:04:00.0: PCI INT A -> Link[LN3A] -> GSI 19 (level, low) -> IRQ 19 [ 15.427567] ath9k 0000:04:00.0: setting latency timer to 64 [ 15.479525] ath: EEPROM regdomain: 0x60 [ 15.479536] ath: EEPROM indicates we should expect a direct regpair map [ 15.479549] ath: Country alpha2 being used: 00 [ 15.479555] ath: Regpair used: 0x60 [ 15.479567] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 15.479577] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479586] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 15.479596] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479604] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 15.479614] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479622] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 15.479632] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479641] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 15.479651] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479659] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 15.479669] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479677] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 15.479687] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479695] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 15.479705] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479713] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 15.479723] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479732] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 15.479741] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479750] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 15.479760] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479768] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 15.479778] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479786] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 15.479796] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.479804] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 15.479814] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (N/A mBi, 2000 mBm) [ 15.482585] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 15.583096] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 15.588325] Registered led device: ath9k-phy0 [ 15.588362] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90000360000, irq=19 [ 16.122357] Linux video capture interface: v2.00 [ 16.131668] em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, interface 0, class 0) [ 16.132063] em28xx #0: chip ID is em2882/em2883 [ 16.133580] IR NEC protocol handler initialized [ 16.462453] em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c [ 16.462491] em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 [ 16.462524] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 [ 16.462556] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 [ 16.462589] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 16.462620] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 16.462652] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 [ 16.462684] em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 [ 16.462717] em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 [ 16.462749] em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00 [ 16.462782] em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 37 00 30 00 37 00 30 00 [ 16.462814] em28xx #0: i2c eeprom b0: 31 00 30 00 31 00 37 00 34 00 37 00 30 00 00 00 [ 16.462846] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 16.462878] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 16.462910] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 16.462942] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 16.462978] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x89e5a7bf [ 16.462985] em28xx #0: EEPROM info: [ 16.462990] em28xx #0: AC97 audio (5 sample rates) [ 16.462996] em28xx #0: 500mA max power [ 16.463004] em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a [ 16.524618] em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17) [ 16.568892] tvp5150 2-005c: chip found @ 0xb8 (em28xx #0) [ 16.573478] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 20 [ 16.573499] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 20 (level, low) -> IRQ 20 [ 16.574397] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 23 [ 16.574413] nvidia 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 23 (level, low) -> IRQ 23 [ 16.574439] nvidia 0000:03:00.0: setting latency timer to 64 [ 16.574454] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 16.575111] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 290.10 Wed Nov 16 17:39:29 PST 2011 [ 16.578861] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 16.578880] HDA Intel 0000:00:08.0: power state changed by ACPI to D0 [ 16.579604] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 16.579621] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 16.579630] hda_intel: Disabling MSI [ 16.579702] HDA Intel 0000:00:08.0: setting latency timer to 64 [ 16.658760] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 16.704094] tvp5150 2-005c: tvp5150am1 detected. [ 16.731832] type=1400 audit(1327262756.915:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=860 comm="apparmor_parser" [ 16.735019] type=1400 audit(1327262756.919:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=859 comm="apparmor_parser" [ 16.744245] type=1400 audit(1327262756.931:8): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=861 comm="apparmor_parser" [ 16.745536] type=1400 audit(1327262756.931:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=859 comm="apparmor_parser" [ 16.746452] type=1400 audit(1327262756.931:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=859 comm="apparmor_parser" [ 16.748446] i2c-core: driver [tuner] using legacy suspend method [ 16.748456] i2c-core: driver [tuner] using legacy resume method [ 16.751171] type=1400 audit(1327262756.935:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=858 comm="apparmor_parser" [ 16.760768] tuner 2-0061: Tuner -1 found with type(s) Radio TV. [ 16.780553] xc2028 2-0061: creating new instance [ 16.780565] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner [ 16.811269] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 16.811284] cfg80211: World regulatory domain updated: [ 16.811290] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 16.811301] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.811310] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.811318] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.811327] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.811336] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.969801] xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 [ 17.052040] xc2028 2-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [ 17.101474] lirc_dev: IR Remote Control driver registered, major 250 [ 17.112458] init: failsafe main process (759) killed by TERM signal [ 17.118332] init: apport pre-start process (928) terminated with status 1 [ 17.120843] init: alsa-restore main process (937) terminated with status 19 [ 17.125984] usbcore: registered new interface driver mceusb [ 17.216619] IR RC5(x) protocol handler initialized [ 17.218800] init: apport post-stop process (981) terminated with status 1 [ 17.259007] IR RC6 protocol handler initialized [ 17.265142] IR JVC protocol handler initialized [ 17.277213] IR Sony protocol handler initialized [ 17.288574] IR LIRC bridge handler initialized [ 17.588737] hda_codec: ALC888: BIOS auto-probing. [ 18.195561] xc2028 2-0061: Loading firmware for type=MTS (4), id 000000000000b700. [ 18.211182] xc2028 2-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. [ 18.380154] Registered IR keymap rc-pinnacle-pctv-hd [ 18.380533] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:04.1/usb1/1-2/rc/rc0/input5 [ 18.380784] rc0: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:04.1/usb1/1-2/rc/rc0 [ 18.381822] em28xx #0: Config register raw data: 0xd0 [ 18.382575] em28xx #0: AC97 vendor ID = 0xffffffff [ 18.384712] em28xx #0: AC97 features = 0x6a90 [ 18.384722] em28xx #0: Empia 202 AC97 audio processor detected [ 18.549934] em28xx #0: v4l2 driver version 0.1.2 [ 18.596043] xc2028 2-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000. [ 19.038942] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 19.639569] MTS (4), id 00000000000000ff: [ 19.639585] xc2028 2-0061: Loading firmware for type=MTS (4), id 0000000100000007. [ 19.865910] em28xx #0: V4L2 video device registered as video0 [ 19.865920] em28xx #0: V4L2 VBI device registered as vbi0 [ 19.866754] usbcore: registered new interface driver em28xx [ 19.866763] em28xx driver loaded [ 19.875294] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 19.875302] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 19.876090] Em28xx: Initialized (Em28xx Audio Extension) extension [ 20.087099] xc2028 2-0061: attaching existing instance [ 20.087110] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner [ 20.087118] em28xx #0: em28xx #0/2: xc3028 attached [ 20.087126] DVB: registering new adapter (em28xx #0) [ 20.087136] DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... [ 20.088868] em28xx #0: Successfully loaded em28xx-dvb [ 20.088899] Em28xx: Initialized (Em28xx dvb Extension) extension [ 20.213748] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 20.213758] vesafb: scrolling: redraw [ 20.213767] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 20.214825] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90003d00000, using 1216k, total 1216k [ 20.215270] Console: switching to colour frame buffer device 80x30 [ 20.215307] fb0: VESA VGA frame buffer device [ 20.263893] init: plymouth-splash main process (1385) terminated with status 1 [ 23.584058] xc2028 2-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [ 24.652049] xc2028 2-0061: Loading firmware for type=D2633 DTV6 ATSC (10030), id 0000000000000000. [ 27.336041] eth0: no IPv6 routers present [ 90.540099] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 5356.401709] init: mythtv-backend main process (1389) killed by TERM signal [ 5466.840036] xc2028 2-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. [ 5467.886819] xc2028 2-0061: Loading firmware for type=D2633 DTV6 ATSC (10030), id 0000000000000000. [14828.759261] exe (3286): /proc/3286/oom_adj is deprecated, please use /proc/3286/oom_score_adj instead.

greatfront7 commented 12 years ago

LSMOD:

Module Size Used by vesafb 13809 1 lgdt330x 14116 1 em28xx_dvb 18304 24 cxd2820r 29389 1 em28xx_dvb dvb_core 110616 3 lgdt330x,em28xx_dvb,cxd2820r em28xx_alsa 13728 0 rc_pinnacle_pctv_hd 12529 0 snd_hda_codec_hdmi 32040 1 snd_hda_codec_realtek 330769 1 ir_lirc_codec 12898 0 ir_sony_decoder 12549 0 ir_jvc_decoder 12546 0 ir_rc6_decoder 12546 0 ir_rc5_decoder 12546 0 mceusb 17906 0 lirc_dev 19204 1 ir_lirc_codec tuner_xc2028 31235 2 tuner 27428 1 snd_hda_intel 33390 3 snd_hda_codec 104802 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec tvp5150 22036 1 nvidia 12128043 40 snd_pcm 96755 5 em28xx_alsa,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 joydev 17693 1 snd_rawmidi 30547 1 snd_seq_midi em28xx 108731 2 em28xx_dvb,em28xx_alsa v4l2_common 16454 3 tuner,tvp5150,em28xx videodev 93004 4 tuner,tvp5150,em28xx,v4l2_common v4l2_compat_ioctl32 17083 1 videodev videobuf_vmalloc 13589 1 em28xx ir_nec_decoder 12546 0 snd_seq_midi_event 14899 1 snd_seq_midi videobuf_core 26390 2 em28xx,videobuf_vmalloc rc_core 26963 10 rc_pinnacle_pctv_hd,ir_lirc_codec,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,mceusb,em28xx,ir_nec_decoder tveeprom 21249 1 em28xx snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event arc4 12529 2 ath9k 127538 0 mac80211 310872 1 ath9k snd_timer 29991 3 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 73882 0 ath9k_common 13839 1 ath9k ath9k_hw 312866 2 ath9k,ath9k_common serio_raw 13166 0 ath 24067 2 ath9k,ath9k_hw cfg80211 199587 3 ath9k,mac80211,ath snd 68266 15 em28xx_alsa,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device shpchp 37345 0 soundcore 12680 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm wmi 19256 0 i2c_nforce2 13058 0 lp 17799 0 parport 46562 1 lp hid_logitech 17677 0 ff_memless 13097 1 hid_logitech usbhid 47198 1 hid_logitech hid 95463 2 hid_logitech,usbhid ahci 26002 2 forcedeth 67563 0 libahci 26861 1 ahci

greatfront7 commented 12 years ago

Accidentally closed, reopening.

sraue commented 12 years ago

Hi, it seems we have all drivers and firmwares included already, do you have still the problem with OpenELEC-2.0 Beta 1?

sraue commented 12 years ago

closing, please open a new issue report if this problem still exist