search

OpenELEC / OpenELEC.tv

OpenELEC - The living room PC for everyone
http://openelec.tv
1.61k stars 882 forks source link

Bug: SiS-chipsets still not supported in generic-image #131

Closed matrixritter closed 12 years ago

matrixritter commented 12 years ago

Description: Installation or booting of OpenELEC failed because of not-supported SiS-chipset on mainboard. My Hardware is a FSC Eprimo E5600 Desktop PC with a GT210 graphics card.

Bug: Kernel can´t find my harddrive.

Solution #1: Rename "GenericBuilds" on http://openelec.tv/get-openelec to "GenericBuilds except SiS-chipsets".

Solution #2: Include needed drivers like said on http://openelec.tv/forum/25-intel-platforms/12-intel-init4-error two years ago.

sraue commented 12 years ago

so post/paste please a "dmesg" and "lsmod" output from a running actual ubuntu/fedora (live) system. there are some sis chipsets supported already and we include additional drivers on request.

matrixritter commented 12 years ago

Output from "dmesg":

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-15-generic (buildd@zirconium) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #26-Ubuntu SMP Fri Jan 20 15:59:53 UTC 2012 (Ubuntu 3.0.0-15.26-generic 3.0.13) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fee0000 (usable) [ 0.000000] BIOS-e820: 000000003fee0000 - 000000003feef000 (ACPI data) [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI present. [ 0.000000] DMI: FUJITSU SIEMENS ESPRIMO E /D2264-A1, BIOS 5.00 R1.04-02.2264.A1 01/18/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3fee0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-E3FFF uncachable [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 003FF00000 mask FFFFF00000 uncachable [ 0.000000] 2 base 00F0000000 mask FFFC000000 write-combining [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00f73b0] f73b0 [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 365e8000 - 372ec000 [ 0.000000] ACPI: RSDP 000f7350 00024 (v02 PTLTD ) [ 0.000000] ACPI: XSDT 3feeb7f4 0004C (v01 PTLTD ? XSDT 00050000 LTP 00000000) [ 0.000000] ACPI: FACP 3feeb8b4 000F4 (v03 FSC 00050000 000F4240) [ 0.000000] ACPI: DSDT 3feeb9a8 034EB (v01 FSC D2030 00050000 MSFT 02000002) [ 0.000000] ACPI: FACS 3feeffc0 00040 [ 0.000000] ACPI: SSDT 3feeee93 000B5 (v01 PTLTD POWERNOW 00050000 LTP 00000001) [ 0.000000] ACPI: APIC 3feeef48 00050 (v01 PTLTD ? APIC 00050000 LTP 00000000) [ 0.000000] ACPI: MCFG 3feeef98 00040 (v01 PTLTD MCFG 00050000 LTP 00000000) [ 0.000000] ACPI: BOOT 3feeefd8 00028 (v01 PTLTD $SBFTBL$ 00050000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 134MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0003fee0 [ 0.000000] On node 0 totalpages: 261742 [ 0.000000] free_area_init_node: node 0, pgdat c17b5400, node_mem_map f5de8200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 270 pages used for memmap [ 0.000000] HighMem zone: 34260 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xf008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f5800000 s26240 r0 d22912 u4194304 [ 0.000000] pcpu-alloc: s26240 r0 d22912 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259696 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.0.0-15-generic root=UUID=0d206808-1b87-42de-ba5f-cd7c4ca3caf6 ro splash quiet vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4189440 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fee0) [ 0.000000] Memory: 1010924k/1047424k available (5336k kernel code, 36044k reserved, 2599k data, 696k init, 138120k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc17c1000 - 0xc186f000 ( 696 kB) [ 0.000000] .data : 0xc1536144 - 0xc17c0080 (2599 kB) [ 0.000000] .text : 0xc1000000 - 0xc1536144 (5336 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f5408000 soft=f540a000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1800.211 MHz processor. [ 0.008003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.42 BogoMIPS (lpj=7200844) [ 0.008011] pid_max: default: 32768 minimum: 301 [ 0.008041] Security Framework initialized [ 0.008070] AppArmor: AppArmor initialized [ 0.008073] Yama: becoming mindful. [ 0.008150] Mount-cache hash table entries: 512 [ 0.008312] Initializing cgroup subsys cpuacct [ 0.008320] Initializing cgroup subsys memory [ 0.008333] Initializing cgroup subsys devices [ 0.008336] Initializing cgroup subsys freezer [ 0.008340] Initializing cgroup subsys net_cls [ 0.008344] Initializing cgroup subsys blkio [ 0.008354] Initializing cgroup subsys perf_event [ 0.008389] mce: CPU supports 5 MCE banks [ 0.012200] SMP alternatives: switching to UP code [ 0.021290] Freeing SMP alternatives: 24k freed [ 0.021308] ACPI: Core revision 20110413 [ 0.026057] ftrace: allocating 24882 entries in 49 pages [ 0.028087] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028428] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.069981] CPU0: AMD Sempron(tm) Processor 3000+ stepping 02 [ 0.072003] Performance Events: AMD PMU driver. [ 0.072003] ... version: 0 [ 0.072003] ... bit width: 48 [ 0.072003] ... generic registers: 4 [ 0.072003] ... value mask: 0000ffffffffffff [ 0.072003] ... max period: 00007fffffffffff [ 0.072003] ... fixed-purpose events: 0 [ 0.072003] ... event mask: 000000000000000f [ 0.072003] Brought up 1 CPUs [ 0.072003] Total of 1 processors activated (3600.42 BogoMIPS). [ 0.072003] devtmpfs: initialized [ 0.072003] PM: Registering ACPI NVS region at 3feef000 (69632 bytes) [ 0.072003] print_constraints: dummy: [ 0.072003] Time: 13:29:03 Date: 01/24/12 [ 0.072003] NET: Registered protocol family 16 [ 0.072003] EISA bus registered [ 0.072003] node 0 link 0: io port [0, fffff] [ 0.072003] TOM: 0000000040000000 aka 1024M [ 0.072003] node 0 link 0: mmio [c0000000, cfffffff] [ 0.072003] node 0 link 0: mmio [a0000, bffff] [ 0.072003] node 0 link 0: mmio [40000000, fe0bffff] [ 0.072003] bus: [00, ff] on node 0 link 0 [ 0.072003] bus: 00 index 0 [io 0x0000-0xffff] [ 0.072003] bus: 00 index 1 [mem 0x40000000-0xffffffff] [ 0.072003] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.072003] ACPI: bus type pci registered [ 0.072003] PCI: MMCONFIG for domain 0000 [bus 00-01] at [mem 0xc0000000-0xc01fffff](base 0xc0000000) [ 0.072003] PCI: not using MMCONFIG [ 0.077434] PCI: PCI BIOS revision 2.10 entry at 0xfd8a3, last bus=2 [ 0.077437] PCI: Using configuration type 1 for base access [ 0.078840] bio: create slab at 0 [ 0.079645] ACPI: EC: Look up EC in DSDT [ 0.082030] ACPI: Interpreter enabled [ 0.082037] ACPI: (supports S0 S1 S3 S4 S5) [ 0.082063] ACPI: Using IOAPIC for interrupt routing [ 0.082086] PCI: MMCONFIG for domain 0000 [bus 00-01] at [mem 0xc0000000-0xc01fffff](base 0xc0000000) [ 0.082605] PCI: MMCONFIG at [mem 0xc0000000-0xc01fffff] reserved in ACPI motherboard resources [ 0.082608] PCI: Using MMCONFIG for extended config space [ 0.086731] ACPI: No dock devices found. [ 0.086735] HEST: Table not found. [ 0.086741] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.086827] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-ff]) [ 0.086977] pci_root PNP0A03:00: host bridge window io 0x0000-0x0cf7 [ 0.086981] pci_root PNP0A03:00: host bridge window io 0x0d00-0xffff [ 0.086985] pci_root PNP0A03:00: host bridge window mem 0x000a0000-0x000bffff [ 0.086988] pci_root PNP0A03:00: host bridge window mem 0x000c8000-0x000dffff [ 0.086992] pci_root PNP0A03:00: host bridge window mem 0x40000000-0xfebfffff [ 0.086996] pci_root PNP0A03:00: host bridge window mem 0xfed00000-0xfedfffff [ 0.086999] pci_root PNP0A03:00: host bridge window mem 0xfef00000-0xff77ffff [ 0.087018] pci 0000:00:00.0: [1039:0761] type 0 class 0x000600 [ 0.087028] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf3ffffff] [ 0.087083] pci 0000:00:01.0: [1039:0004] type 1 class 0x000604 [ 0.087124] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.087128] pci 0000:00:01.0: PME# disabled [ 0.087144] pci 0000:00:02.0: [1039:0965] type 0 class 0x000601 [ 0.087200] pci 0000:00:02.5: [1039:5513] type 0 class 0x000101 [ 0.087223] pci 0000:00:02.5: reg 10: [io 0x01f0-0x01f7] [ 0.087231] pci 0000:00:02.5: reg 14: [io 0x03f4-0x03f7] [ 0.087238] pci 0000:00:02.5: reg 18: [io 0x0170-0x0177] [ 0.087246] pci 0000:00:02.5: reg 1c: [io 0x0374-0x0377] [ 0.087254] pci 0000:00:02.5: reg 20: [io 0x1c80-0x1c8f] [ 0.087277] pci 0000:00:02.5: PME# supported from D3cold [ 0.087281] pci 0000:00:02.5: PME# disabled [ 0.087299] pci 0000:00:02.7: [1039:7012] type 0 class 0x000401 [ 0.087311] pci 0000:00:02.7: reg 10: [io 0x1400-0x14ff] [ 0.087320] pci 0000:00:02.7: reg 14: [io 0x1000-0x107f] [ 0.087359] pci 0000:00:02.7: supports D1 D2 [ 0.087362] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.087366] pci 0000:00:02.7: PME# disabled [ 0.087378] pci 0000:00:03.0: [1039:7001] type 0 class 0x000c03 [ 0.087389] pci 0000:00:03.0: reg 10: [mem 0xf4000000-0xf4000fff] [ 0.087431] pci 0000:00:03.1: [1039:7001] type 0 class 0x000c03 [ 0.087441] pci 0000:00:03.1: reg 10: [mem 0xf4001000-0xf4001fff] [ 0.087483] pci 0000:00:03.2: [1039:7001] type 0 class 0x000c03 [ 0.087493] pci 0000:00:03.2: reg 10: [mem 0xf4002000-0xf4002fff] [ 0.087537] pci 0000:00:03.3: [1039:7002] type 0 class 0x000c03 [ 0.087549] pci 0000:00:03.3: reg 10: [mem 0xf4003000-0xf4003fff] [ 0.087590] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.087594] pci 0000:00:03.3: PME# disabled [ 0.087612] pci 0000:00:05.0: [1039:0182] type 0 class 0x000101 [ 0.087624] pci 0000:00:05.0: reg 10: [io 0x1cb0-0x1cb7] [ 0.087632] pci 0000:00:05.0: reg 14: [io 0x1ca4-0x1ca7] [ 0.087640] pci 0000:00:05.0: reg 18: [io 0x1ca8-0x1caf] [ 0.087647] pci 0000:00:05.0: reg 1c: [io 0x1ca0-0x1ca3] [ 0.087655] pci 0000:00:05.0: reg 20: [io 0x1c90-0x1c9f] [ 0.087663] pci 0000:00:05.0: reg 24: [io 0x1c00-0x1c7f] [ 0.087681] pci 0000:00:05.0: PME# supported from D3cold [ 0.087685] pci 0000:00:05.0: PME# disabled [ 0.087702] pci 0000:00:06.0: [1039:000a] type 1 class 0x000604 [ 0.087746] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.087750] pci 0000:00:06.0: PME# disabled [ 0.087772] pci 0000:00:09.0: [10ec:8169] type 0 class 0x000200 [ 0.087785] pci 0000:00:09.0: reg 10: [io 0x1800-0x18ff] [ 0.087794] pci 0000:00:09.0: reg 14: [mem 0xf4004000-0xf40040ff] [ 0.087833] pci 0000:00:09.0: supports D1 D2 [ 0.087835] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold [ 0.087840] pci 0000:00:09.0: PME# disabled [ 0.087853] pci 0000:00:0a.0: [1131:7146] type 0 class 0x000480 [ 0.087863] pci 0000:00:0a.0: reg 10: [mem 0xf4004400-0xf40045ff] [ 0.087918] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.087940] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.087959] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.087977] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.088021] PCI: peer root bus 00 res updated from pci conf [ 0.088063] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300 [ 0.088074] pci 0000:01:00.0: reg 10: [mem 0xf5000000-0xf5ffffff] [ 0.088085] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.088096] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.088104] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] [ 0.088112] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.088154] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403 [ 0.088164] pci 0000:01:00.1: reg 10: [mem 0xf4100000-0xf4103fff] [ 0.096024] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.096030] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.096034] pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf5ffffff] [ 0.096039] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff pref] [ 0.096076] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.096082] pci 0000:00:06.0: bridge window io 0xf000-0x0000 [ 0.096087] pci 0000:00:06.0: bridge window mem 0xfff00000-0x000fffff [ 0.096092] pci 0000:00:06.0: bridge window mem 0xfff00000-0x000fffff pref [ 0.096101] pci_bus 0000:00: on NUMA node 0 [ 0.096107] ACPI: PCI Interrupt Routing Table [SB.PCI0._PRT] [ 0.096370] ACPI: PCI Interrupt Routing Table [SB.PCI0.PCIE._PRT] [ 0.096427] ACPI: PCI Interrupt Routing Table [SB.PCI0.PCE0._PRT] [ 0.096517] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.096521] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.096524] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.100488] ACPI: PCI Interrupt Link [LNKA](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.100561] ACPI: PCI Interrupt Link [LNKB](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.100629] ACPI: PCI Interrupt Link [LNKC](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.100697] ACPI: PCI Interrupt Link [LNKD](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.100765] ACPI: PCI Interrupt Link [LNKE](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.100832] ACPI: PCI Interrupt Link [LNKF](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.100906] ACPI: PCI Interrupt Link [LNKG](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.100978] ACPI: PCI Interrupt Link [LNKH](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.101119] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.101123] vgaarb: loaded [ 0.101125] vgaarb: bridge control possible 0000:01:00.0 [ 0.101429] SCSI subsystem initialized [ 0.101506] libata version 3.00 loaded. [ 0.101574] usbcore: registered new interface driver usbfs [ 0.101589] usbcore: registered new interface driver hub [ 0.101620] usbcore: registered new device driver usb [ 0.101736] PCI: Using ACPI for IRQ routing [ 0.101741] PCI: pci_cache_line_size set to 64 bytes [ 0.101801] reserve RAM buffer: 000000000009e000 - 000000000009ffff [ 0.101805] reserve RAM buffer: 000000003fee0000 - 000000003fffffff [ 0.101938] NetLabel: Initializing [ 0.101941] NetLabel: domain hash size = 128 [ 0.101942] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.101956] NetLabel: unlabeled traffic allowed by default [ 0.110147] AppArmor: AppArmor Filesystem Enabled [ 0.110185] pnp: PnP ACPI init [ 0.110203] ACPI: bus type pnp registered [ 0.110313] pnp 00:00: [bus 00-ff] [ 0.110317] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.110321] pnp 00:00: [io 0x0d00-0xffff window] [ 0.110324] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.110327] pnp 00:00: [mem 0x000c8000-0x000dffff window] [ 0.110330] pnp 00:00: [mem 0x40000000-0xfebfffff window] [ 0.110334] pnp 00:00: [mem 0xfed00000-0xfedfffff window] [ 0.110337] pnp 00:00: [mem 0xfef00000-0xff77ffff window] [ 0.110340] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.110395] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.110630] pnp 00:01: [io 0x0010-0x001f] [ 0.110633] pnp 00:01: [io 0x0022-0x002d] [ 0.110636] pnp 00:01: [io 0x0030-0x003f] [ 0.110639] pnp 00:01: [io 0x0050-0x0053] [ 0.110641] pnp 00:01: [io 0x0062-0x0063] [ 0.110644] pnp 00:01: [io 0x0065-0x006f] [ 0.110647] pnp 00:01: [io 0x0074-0x007f] [ 0.110649] pnp 00:01: [io 0x0090-0x009f] [ 0.110655] pnp 00:01: [io 0x00a2-0x00b1] [ 0.110657] pnp 00:01: [io 0x00b4-0x00bf] [ 0.110660] pnp 00:01: [io 0x00e0-0x00ef] [ 0.110663] pnp 00:01: [io 0x0072-0x0073] [ 0.110665] pnp 00:01: [io 0x002e-0x002f] [ 0.110668] pnp 00:01: [io 0x0480-0x048f] [ 0.110671] pnp 00:01: [io 0x04d0-0x04d1] [ 0.110674] pnp 00:01: [io 0xf000-0xf0fe] [ 0.110676] pnp 00:01: [io 0xf200-0xf2fe] [ 0.110679] pnp 00:01: [io 0x0800-0x087f] [ 0.110682] pnp 00:01: [io 0xfe00] [ 0.110685] pnp 00:01: [mem 0xfec00000-0xfecfffff] [ 0.110688] pnp 00:01: [mem 0xfee00000-0xfeefffff] [ 0.110691] pnp 00:01: [mem 0xff780000-0xffefffff] [ 0.110693] pnp 00:01: [mem 0xc0000000-0xcfffffff] [ 0.110776] system 00:01: [io 0x0480-0x048f] has been reserved [ 0.110780] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.110784] system 00:01: [io 0xf000-0xf0fe] has been reserved [ 0.110788] system 00:01: [io 0xf200-0xf2fe] has been reserved [ 0.110791] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.110795] system 00:01: [io 0xfe00] has been reserved [ 0.110799] system 00:01: [mem 0xfec00000-0xfecfffff] could not be reserved [ 0.110804] system 00:01: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.110808] system 00:01: [mem 0xff780000-0xffefffff] has been reserved [ 0.110811] system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved [ 0.110816] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.110831] pnp 00:02: [io 0x0000-0x000f] [ 0.110834] pnp 00:02: [io 0x0080-0x008f] [ 0.110837] pnp 00:02: [io 0x00c0-0x00df] [ 0.110840] pnp 00:02: [dma 4] [ 0.110875] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.110892] pnp 00:03: [io 0x0070-0x0071] [ 0.110906] pnp 00:03: [irq 8] [ 0.110940] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.110957] pnp 00:04: [io 0x00f0-0x00fe] [ 0.110965] pnp 00:04: [irq 13] [ 0.111003] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.111016] pnp 00:05: [io 0x0061] [ 0.111051] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.111069] pnp 00:06: [io 0x0060] [ 0.111071] pnp 00:06: [io 0x0064] [ 0.111078] pnp 00:06: [irq 1] [ 0.111120] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.111177] pnp 00:07: [irq 12] [ 0.111223] pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.111513] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (disabled) [ 0.111519] pnp: PnP ACPI: found 9 devices [ 0.111522] ACPI: ACPI bus type pnp unregistered [ 0.111526] PnPBIOS: Disabled by ACPI PNP [ 0.148037] Switching to clocksource acpi_pm [ 0.148063] PCI: max bus depth: 1 pci_try_num: 2 [ 0.148084] pci 0000:01:00.0: BAR 6: assigned [mem 0xd2000000-0xd207ffff pref] [ 0.148088] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.148092] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.148097] pci 0000:00:01.0: bridge window [mem 0xf4100000-0xf5ffffff] [ 0.148102] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xefffffff pref] [ 0.148108] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.148110] pci 0000:00:06.0: bridge window [io disabled] [ 0.148115] pci 0000:00:06.0: bridge window [mem disabled] [ 0.148118] pci 0000:00:06.0: bridge window [mem pref disabled] [ 0.148132] pci 0000:00:01.0: setting latency timer to 64 [ 0.148139] pci 0000:00:06.0: setting latency timer to 64 [ 0.148143] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.148147] pci_bus 0000:00: resource 5 [mem 0x40000000-0xffffffff] [ 0.148150] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.148153] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.148157] pci_bus 0000:01: resource 1 [mem 0xf4100000-0xf5ffffff] [ 0.148160] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xefffffff pref] [ 0.148210] NET: Registered protocol family 2 [ 0.148278] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.148588] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.149295] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.149641] TCP: Hash tables configured (established 131072 bind 65536) [ 0.149645] TCP reno registered [ 0.149649] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.149663] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.149774] NET: Registered protocol family 1 [ 0.352116] Switched to NOHz mode on CPU #0 [ 0.756843] pci 0000:01:00.0: Boot video device [ 0.756854] PCI: CLS 64 bytes, default 64 [ 0.756899] Simple Boot Flag at 0x69 set to 0x1 [ 0.757217] audit: initializing netlink socket (disabled) [ 0.757229] type=2000 audit(1327411743.755:1): initialized [ 0.783710] Trying to unpack rootfs image as initramfs... [ 0.818925] highmem bounce pool size: 64 pages [ 0.818932] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.836238] VFS: Disk quotas dquot_6.5.2 [ 0.836326] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.837198] fuse init (API version 7.16) [ 0.837330] msgmni has been set to 1704 [ 0.852303] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.852365] io scheduler noop registered [ 0.852368] io scheduler deadline registered [ 0.852389] io scheduler cfq registered (default) [ 0.852550] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.852590] pcieport 0000:00:06.0: irq 40 for MSI/MSI-X [ 0.852689] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.852723] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.852883] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.852889] ACPI: Power Button [PWRB] [ 0.852945] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.852949] ACPI: Power Button [PWRF] [ 0.852976] ACPI: acpi_idle registered with cpuidle [ 0.854158] ERST: Table is not found! [ 0.854305] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.855642] serial 00:08: [io 0x02f8-0x02ff] [ 0.855695] serial 00:08: [irq 3] [ 0.856068] serial 00:08: activated [ 0.876436] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.876474] isapnp: Scanning for PnP cards... [ 0.944446] Linux agpgart interface v0.103 [ 0.944491] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0761] [ 0.946409] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf0000000 [ 0.947929] brd: module loaded [ 0.953099] loop: module loaded [ 0.953314] pata_sis 0000:00:02.5: version 0.5.2 [ 0.953342] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.956099] scsi0 : pata_sis [ 0.956257] scsi1 : pata_sis [ 0.956799] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1c80 irq 14 [ 0.956803] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1c88 irq 15 [ 0.956896] pata_acpi 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.956941] pata_acpi 0000:00:05.0: PCI INT A disabled [ 0.957408] Fixed MDIO Bus: probed [ 0.957442] PPP generic driver version 2.4.2 [ 0.957517] tun: Universal TUN/TAP device driver, 1.6 [ 0.957519] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 0.957619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.957653] ehci_hcd 0000:00:03.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.957671] ehci_hcd 0000:00:03.3: EHCI Host Controller [ 0.957723] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.957756] ehci_hcd 0000:00:03.3: cache line size of 64 is not supported [ 0.957780] ehci_hcd 0000:00:03.3: irq 23, io mem 0xf4003000 [ 0.968323] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.968533] hub 1-0:1.0: USB hub found [ 0.968539] hub 1-0:1.0: 8 ports detected [ 0.968626] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.968662] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.968684] ohci_hcd 0000:00:03.0: OHCI Host Controller [ 0.968741] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.968775] ohci_hcd 0000:00:03.0: irq 20, io mem 0xf4000000 [ 1.024382] hub 2-0:1.0: USB hub found [ 1.024391] hub 2-0:1.0: 3 ports detected [ 1.024483] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.024502] ohci_hcd 0000:00:03.1: OHCI Host Controller [ 1.024557] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 1.024592] ohci_hcd 0000:00:03.1: irq 21, io mem 0xf4001000 [ 1.101770] hub 3-0:1.0: USB hub found [ 1.101779] hub 3-0:1.0: 3 ports detected [ 1.101871] ohci_hcd 0000:00:03.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 [ 1.101890] ohci_hcd 0000:00:03.2: OHCI Host Controller [ 1.101944] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 1.101976] ohci_hcd 0000:00:03.2: irq 22, io mem 0xf4002000 [ 1.158539] hub 4-0:1.0: USB hub found [ 1.158548] hub 4-0:1.0: 2 ports detected [ 1.158625] uhci_hcd: USB Universal Host Controller Interface driver [ 1.158726] i8042: PNP: PS/2 Controller [PNP0303:KEYB,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.209102] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.209110] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.209237] mousedev: PS/2 mouse device common for all mice [ 1.209370] rtc_cmos 00:03: RTC can wake from S4 [ 1.209469] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.209494] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 1.209636] device-mapper: uevent: version 1.0.3 [ 1.209739] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 1.209782] EISA: Probing bus 0 at eisa.0 [ 1.209785] EISA: Cannot allocate resource for mainboard [ 1.209789] Cannot allocate resource for EISA slot 1 [ 1.209791] Cannot allocate resource for EISA slot 2 [ 1.209794] Cannot allocate resource for EISA slot 3 [ 1.209797] Cannot allocate resource for EISA slot 4 [ 1.209800] Cannot allocate resource for EISA slot 5 [ 1.209802] Cannot allocate resource for EISA slot 6 [ 1.209805] Cannot allocate resource for EISA slot 7 [ 1.209808] Cannot allocate resource for EISA slot 8 [ 1.209810] EISA: Detected 0 cards. [ 1.209821] cpufreq-nforce2: No nForce2 chipset. [ 1.209824] cpuidle: using governor ladder [ 1.209826] cpuidle: using governor menu [ 1.209829] EFI Variables Facility v0.08 2004-May-17 [ 1.210134] TCP cubic registered [ 1.210313] NET: Registered protocol family 10 [ 1.210947] NET: Registered protocol family 17 [ 1.210974] Registering the dns_resolver key type [ 1.211008] Using IPI No-Shortcut mode [ 1.211129] PM: Hibernation image not present or could not be loaded. [ 1.211141] registered taskstats version 1 [ 1.301025] ata1.00: ATA-6: FUJITSU MHS2020AT E, 8406, max UDMA/100 [ 1.301031] ata1.00: 39070080 sectors, multi 16: LBA [ 1.301039] ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL10, max UDMA/33 [ 1.391306] isapnp: No Plug & Play device found [ 1.391686] ata1.00: configured for UDMA/100 [ 1.440443] ata1.01: configured for UDMA/33 [ 1.443058] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHS2020A 8406 PQ: 0 ANSI: 5 [ 1.443268] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.447212] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL10 PQ: 0 ANSI: 5 [ 1.447371] sd 0:0:0:0: [sda] 39070080 512-byte logical blocks: (20.0 GB/18.6 GiB) [ 1.455545] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.455551] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.455706] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.455783] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.462444] sd 0:0:0:0: [sda] Write Protect is off [ 1.462449] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.462474] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.512077] usb 1-7: new high speed USB device number 4 using ehci_hcd [ 1.587518] Freeing initrd memory: 13328k freed [ 1.595655] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 1.596208] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.604464] Magic number: 12:77:484 [ 1.604562] rtc_cmos 00:03: setting system clock to 2012-01-24 13:29:05 UTC (1327411745) [ 1.604568] powernow-k8: Found 1 AMD Sempron(tm) Processor 3000+ (1 cpu cores) (version 2.20.00) [ 1.604603] powernow-k8: fid 0xa (1800 MHz), vid 0x6 [ 1.604606] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 1.604653] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.604656] EDD information not available. [ 1.612097] Freeing unused kernel memory: 696k freed [ 1.612535] Write protecting the kernel text: 5340k [ 1.612576] Write protecting the kernel read-only data: 2192k [ 1.639719] udevd[82]: starting version 173 [ 1.780055] Refined TSC clocksource calibration: 1800.063 MHz. [ 1.780064] Switching to clocksource tsc [ 1.835958] sata_sis 0000:00:05.0: version 1.0 [ 1.835975] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.835981] sata_sis 0000:00:05.0: Detected SiS 182/965L chipset [ 1.853035] scsi2 : sata_sis [ 1.856203] scsi3 : sata_sis [ 1.856432] ata3: SATA max UDMA/133 cmd 0x1cb0 ctl 0x1ca4 bmdma 0x1c90 irq 17 [ 1.856437] ata4: SATA max UDMA/133 cmd 0x1ca8 ctl 0x1ca0 bmdma 0x1c98 irq 17 [ 1.858040] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.858073] r8169 0000:00:09.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.858099] r8169 0000:00:09.0: (unregistered net_device): no PCI Express capability [ 1.863945] r8169 0000:00:09.0: eth0: RTL8110s at 0xf8012000, 00:30:05:d5:3e:23, XID 04000000 IRQ 19 [ 1.948045] usb 2-1: new low speed USB device number 2 using ohci_hcd [ 2.176044] ata3: SATA link down (SStatus 0 SControl 300) [ 2.464020] usb 4-1: new low speed USB device number 2 using ohci_hcd [ 2.496032] ata4: SATA link down (SStatus 0 SControl 300) [ 2.507653] input: USB Mouse as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/input/input2 [ 2.507934] generic-usb 0003:15D9:0A33.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:03.0-1/input0 [ 2.508221] usbcore: registered new interface driver usbhid [ 2.508226] usbhid: USB HID core driver [ 2.716768] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.0/input/input3 [ 2.716902] generic-usb 0003:046E:52CF.0002: input,hidraw1: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:03.2-1/input0 [ 2.757276] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:03.2/usb4/4-1/4-1:1.1/input/input4 [ 2.757445] generic-usb 0003:046E:52CF.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:03.2-1/input1 [ 3.270423] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 4.824053] floppy0: no floppy controllers found [ 16.270956] udevd[291]: starting version 173 [ 16.338429] lp: driver loaded but no devices found [ 16.363631] Adding 975868k swap on /dev/sda7. Priority:-1 extents:1 across:975868k [ 16.650717] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 16.650723] hda_intel: Disabling MSI [ 16.650749] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 16.760538] nvidia: module license 'NVIDIA' taints kernel. [ 16.760543] Disabling lock debugging due to kernel taint [ 17.381708] saa7146: register extension 'budget dvb'. [ 17.381745] budget dvb 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 17.381776] saa7146: found saa7146 @ mem f803a400 (revision 1, irq 17) (0x13c2,0x1016). [ 17.381783] saa7146 (0): dma buffer size 192512 [ 17.381786] DVB: registering new adapter (TT-Budget/WinTV-NOVA-S PCI) [ 17.413514] type=1400 audit(1327411761.306:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=425 comm="apparmor_parser" [ 17.414061] type=1400 audit(1327411761.306:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=425 comm="apparmor_parser" [ 17.414403] type=1400 audit(1327411761.306:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=425 comm="apparmor_parser" [ 17.423699] adapter has MAC addr = 00:d0:5c:08:ea:62 [ 17.544555] r8169 0000:00:09.0: eth0: link down [ 17.550259] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.616070] usb 1-7: reset high speed USB device number 4 using ehci_hcd [ 17.738379] LNBx2x attached on addr=8 [ 17.738388] DVB: registering adapter 0 frontend 0 (Samsung S5H1420/PnpNetwork PN1010 DVB-S)... [ 17.738649] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 17.752204] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 17.752210] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752214] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 17.752218] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752221] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 17.752224] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752227] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 17.752231] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752234] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 17.752237] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752240] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 17.752244] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752247] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 17.752250] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752253] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 17.752257] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752260] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 17.752263] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752266] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 17.752270] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752273] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 17.752276] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752279] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 17.752283] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752286] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 17.752289] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.752292] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 17.752296] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (600 mBi, 2000 mBm) [ 17.781532] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 17.782298] zd1211rw 1-7:1.0: phy0 [ 17.782376] usbcore: registered new interface driver zd1211rw [ 17.902984] ppdev: user-space parallel port driver [ 17.956958] cfg80211: Calling CRDA to update world regulatory domain [ 17.962665] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule: [ 17.962672] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962676] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule: [ 17.962680] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962683] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule: [ 17.962686] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962689] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule: [ 17.962693] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962696] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule: [ 17.962699] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962702] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule: [ 17.962706] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962709] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule: [ 17.962712] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962715] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule: [ 17.962719] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962722] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule: [ 17.962725] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962728] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule: [ 17.962732] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962735] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule: [ 17.962738] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962741] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule: [ 17.962745] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962748] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule: [ 17.962751] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962754] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule: [ 17.962758] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm) [ 17.962762] cfg80211: World regulatory domain updated: [ 17.962764] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 17.962768] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.962771] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.962774] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 17.962778] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 17.962781] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 18.060016] intel8x0_measure_ac97_clock: measured 54307 usecs (2613 samples) [ 18.060021] intel8x0: clocking to 48000 [ 19.179740] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 19.592499] r8169 0000:00:09.0: eth0: link up [ 19.592716] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.648022] floppy0: no floppy controllers found [ 19.715743] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 19.991489] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 20.185948] init: Failed to spawn network-manager main process: unable to execute: No such file or directory [ 20.768009] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x005f1c00 [ 21.238949] init: failsafe main process (615) killed by TERM signal [ 21.273135] type=1400 audit(1327411765.166:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=681 comm="apparmor_parser" [ 21.273723] type=1400 audit(1327411765.166:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=681 comm="apparmor_parser" [ 21.274063] type=1400 audit(1327411765.166:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=681 comm="apparmor_parser" [ 21.277590] type=1400 audit(1327411765.170:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=682 comm="apparmor_parser" [ 21.452696] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0 [ 21.484058] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0 [ 21.516024] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0 [ 21.548012] HDMI status: Pin=5 Presence_Detect=0 ELD_Valid=0 [ 21.564230] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input5 [ 21.564440] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6 [ 21.564606] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7 [ 21.564783] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8 [ 21.566523] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.566534] nvidia 0000:01:00.0: setting latency timer to 64 [ 21.566540] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 21.566900] NVRM: loading NVIDIA UNIX x86 Kernel Module 290.10 Wed Nov 16 19:27:25 PST 2011 [ 21.746322] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 21.746326] vesafb: scrolling: redraw [ 21.746331] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 21.746536] vesafb: framebuffer at 0xd1000000, mapped to 0xf8a00000, using 1216k, total 1216k [ 21.746718] Console: switching to colour frame buffer device 80x30 [ 21.746737] fb0: VESA VGA frame buffer device [ 22.901951] init: plymouth-stop pre-start process (846) terminated with status 1 [ 24.347252] irq 16: nobody cared (try booting with the "irqpoll" option) [ 24.347261] Pid: 800, comm: Xorg Tainted: P 3.0.0-15-generic #26-Ubuntu [ 24.347264] Call Trace: [ 24.347273] [] ? printk+0x2d/0x2f [ 24.347279] [] report_bad_irq+0x29/0xd0 [ 24.347294] [] ? rtl8169_interrupt+0xbe/0x210 [r8169] [ 24.347299] [] note_interrupt+0x104/0x150 [ 24.347303] [] handle_irq_event_percpu+0x9e/0x200 [ 24.347308] [] ? default_spin_lock_flags+0x8/0x10 [ 24.347314] [] ? io_apic_modify_irq+0x7d/0x90 [ 24.347318] [] handle_irq_event+0x3b/0x60 [ 24.347323] [] ? unmask_irq+0x30/0x30 [ 24.347327] [] handle_fasteoi_irq+0x4e/0xc0 [ 24.347329] [] ? do_IRQ+0x42/0xc0 [ 24.347335] [] ? common_interrupt+0x30/0x38 [ 24.347339] [] ? common_interrupt+0x30/0x38 [ 24.347343] [] ? kobject_put+0x10/0x50 [ 24.347348] [] ? pci_get_dev_by_id+0x54/0x80 [ 24.347352] [] ? pci_get_subsys+0x5f/0x90 [ 24.347356] [] ? pci_get_device+0x20/0x30 [ 24.347360] [] ? pci_get_domain_bus_and_slot+0x29/0x50 [ 24.347539] [] ? os_pci_init_handle+0x96/0x160 [nvidia] [ 24.347713] [] ? _nv014302rm+0x23/0x27 [nvidia] [ 24.347856] [] ? _nv013900rm+0x8e/0x225 [nvidia] [ 24.348000] [] ? _nv013871rm+0x29/0x2bd [nvidia] [ 24.348008] [] ? _nv013906rm+0x90/0x159 [nvidia] [ 24.348008] [] ? _nv013870rm+0x45/0x53 [nvidia] [ 24.348008] [] ? _nv013846rm+0x94a/0xa4f [nvidia] [ 24.348008] [] ? _nv012143rm+0x116/0x515 [nvidia] [ 24.348008] [] ? _nv012143rm+0xbf/0x515 [nvidia] [ 24.348008] [] ? _nv003907rm+0x17d/0x1872 [nvidia] [ 24.348008] [] ? _nv003932rm+0x8ce4/0xad4f [nvidia] [ 24.348008] [] ? _nv003932rm+0x7aff/0xad4f [nvidia] [ 24.348008] [] ? _nv009669rm+0xb/0xf [nvidia] [ 24.348008] [] ? _nv014339rm+0x6ab/0x81b [nvidia] [ 24.348008] [] ? _nv001080rm+0x427/0x644 [nvidia] [ 24.348008] [] ? rm_init_adapter+0x91/0x1a4 [nvidia] [ 24.348008] [] ? radix_tree_lookup+0xa/0x10 [ 24.348008] [] ? rcu_irq_exit+0xd/0x10 [ 24.348008] [] ? rm_init_adapter+0x1/0x1a4 [nvidia] [ 24.348008] [] ? nv_kern_open+0x3d0/0x740 [nvidia] [ 24.348008] [] ? chrdev_open+0xb5/0x1e0 [ 24.348008] [] ? __dentry_open+0x121/0x2d0 [ 24.348008] [] ? cdev_put+0x20/0x20 [ 24.348008] [] ? nameidata_to_filp+0x86/0x90 [ 24.348008] [] ? do_last+0x327/0x660 [ 24.348008] [] ? path_openat+0x9d/0x350 [ 24.348008] [] ? kmem_cache_alloc+0x11d/0x140 [ 24.348008] [] ? setattr_copy+0xa4/0x120 [ 24.348008] [] ? do_filp_open+0x31/0x80 [ 24.348008] [] ? strncpy_from_user+0x38/0x70 [ 24.348008] [] ? alloc_fd+0xa3/0xe0 [ 24.348008] [] ? do_sys_open+0xe1/0x1f0 [ 24.348008] [] ? vfsmount_lock_local_unlock+0x19/0x20 [ 24.348008] [] ? sys_open+0x2e/0x40 [ 24.348008] [] ? syscall_call+0x7/0xb [ 24.348008] handlers: [ 24.348008] [] nv_kern_isr [ 24.348008] Disabling IRQ #16 [ 29.888006] eth0: no IPv6 routers present [ 82.980106] Marking TSC unstable due to cpufreq changes [ 82.982536] Switching to clocksource acpi_pm

matrixritter commented 12 years ago

Output from "lsmod"

Module Size Used by vesafb 13489 1 snd_hda_codec_hdmi 31426 4 ppdev 12849 0 arc4 12473 2 lnbp21 12822 1 zd1211rw 53352 0 nvidia 10782577 30 mac80211 393459 1 zd1211rw s5h1420 18258 1 snd_intel8x0 33318 2 snd_ac97_codec 106082 1 snd_intel8x0 ac97_bus 12642 1 snd_ac97_codec snd_seq_midi 13132 0 budget 19109 0 budget_core 18616 1 budget saa7146 23929 2 budget,budget_core ttpci_eeprom 12547 1 budget_core psmouse 73673 0 cfg80211 172427 2 zd1211rw,mac80211 dvb_core 94826 2 budget,budget_core serio_raw 12990 0 snd_rawmidi 25241 1 snd_seq_midi k8temp 12905 0 snd_seq_midi_event 14475 1 snd_seq_midi snd_hda_intel 24262 0 snd_hda_codec 91859 2 snd_hda_codec_hdmi,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_pcm 80435 5 snd_hda_codec_hdmi,snd_intel8x0,snd_ac97_codec,snd_hda_intel,snd_hda_codec parport_pc 32114 0 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq snd_timer 28932 2 snd_seq,snd_pcm snd 55902 15 snd_hda_codec_hdmi,snd_intel8x0,snd_ac97_codec,snd_rawmidi,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_pcm,snd_seq_device,snd_timer soundcore 12600 1 snd snd_page_alloc 14115 3 snd_intel8x0,snd_hda_intel,snd_pcm lp 17455 0 parport 40930 3 ppdev,parport_pc,lp usbhid 41905 0 hid 77367 1 usbhid r8169 43104 0 sata_sis 12703 0

stefansaraev commented 12 years ago

I believe this is fixed in a900511c

could you please confirm if it works on latest beta ?

sraue commented 12 years ago

should be solved already, please open a new request if the problem still exist