search

OpenELEC / OpenELEC.tv

OpenELEC - The living room PC for everyone
http://openelec.tv
1.61k stars 881 forks source link

Driver Request Engenius EUB-9603H Wifi Dongle #137

Closed haye86 closed 12 years ago

haye86 commented 12 years ago

I would like to request that drivers be included in the standard openelec install (or instructions for a relevant add-on) to be able to use a Engenius EUB-9603H Wifi Dongle.

http://www.engeniustech.com/index.php?option=com_content&view=article&catid=93:usb-adapters&id=3382:eub9603h&Itemid=126

sraue commented 12 years ago

can you paste a "dmesg" and "lsmod" output from a linux system where this wifi dongle works?

haye86 commented 12 years ago

I can look into that this weekend, please tell me what to do and what to send you exactly, im thinking of trying the dongle with ubuntu live disk on my laptop. I'm rather new at this. Greetings H de Jong

2012/4/17, Stephan Raue reply@reply.github.com:

can you paste a "dmesg" and "lsmod" output from a linux system where this wifi dongle works?

Reply to this email directly or view it on GitHub: https://github.com/OpenELEC/OpenELEC.tv/issues/137#issuecomment-5171753

Verzonden vanaf mijn mobiele apparaat

Groeten,

H. de Jong

haye86 commented 12 years ago

added you find the output files please contact if i must do anything else

Op 17 april 2012 14:25 schreef Haye de jong haye86@gmail.com het volgende:

I can look into that this weekend, please tell me what to do and what to send you exactly, im thinking of trying the dongle with ubuntu live disk on my laptop. I'm rather new at this. Greetings H de Jong

2012/4/17, Stephan Raue < reply@reply.github.com

: can you paste a "dmesg" and "lsmod" output from a linux system where this wifi dongle works?

Reply to this email directly or view it on GitHub: https://github.com/OpenELEC/OpenELEC.tv/issues/137#issuecomment-5171753

Verzonden vanaf mijn mobiele apparaat

Groeten,

H. de Jong

Groeten,

H. de Jong [ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP 1672 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfdd000 0219F (v01 HP 1672 00001000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000001dfe00000 [ 0.000000] Initmem setup node 0 0000000000000000-00000001dfe00000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100013fff] [ 0.000000] [ffffea0000000000-ffffea00069fffff] PMD -> [ffff880100200000-ffff8801057fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001dfe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0009ce3f [ 0.000000] 0: 0x0009cfff -> 0x0009d000 [ 0.000000] 0: 0x00100000 -> 0x001dfe00 [ 0.000000] On node 0 totalpages: 1559501 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3925 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 624248 pages, LIFO batch:31 [ 0.000000] Normal zone: 12537 pages used for memmap [ 0.000000] Normal zone: 904455 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] early_res array is doubled to 64 at [1c000 - 1c7ff] [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000 [ 0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000 [ 0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000 [ 0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000 [ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 [ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 [ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] early_res array is doubled to 128 at [1c800 - 1d7ff] [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880001e00000 s84136 r8192 d22360 u262144 [ 0.000000] pcpu-alloc: s84136 r8192 d22360 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1532628 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: initrd=initrd,10240768.spl ramdisk_size=512000 ramdisk_blocksize=4096 splash=silent quiet preloadlog=/dev/null vga=0x317 [ 0.000000] bootsplash: silent mode. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Subtract (69 early reservations) [ 0.000000] #1 [0001000000 - 0001d95fb8] TEXT DATA BSS [ 0.000000] #2 [007ed9c000 - 0080000000] RAMDISK [ 0.000000] #3 [0001d96000 - 0001d9630f] BRK [ 0.000000] #4 [00000fe1c0 - 0000100000] BIOS reserved [ 0.000000] #5 [00000fe1b0 - 00000fe1c0] MP-table mpf [ 0.000000] #6 [000009d800 - 00000e9770] BIOS reserved [ 0.000000] #7 [00000e9a74 - 00000fe1b0] BIOS reserved [ 0.000000] #8 [00000e9770 - 00000e9a74] MP-table mpc [ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #11 [0000016000 - 0000018000] PGTABLE [ 0.000000] #12 [0000018000 - 000001c000] PGTABLE [ 0.000000] #13 [0100000000 - 0100014000] NODE_DATA [ 0.000000] #14 [0001d96340 - 0001d97340] BOOTMEM [ 0.000000] #15 [0100014000 - 0100014480] BOOTMEM [ 0.000000] #16 [0100015000 - 0100016000] BOOTMEM [ 0.000000] #17 [0100016000 - 0100017000] BOOTMEM [ 0.000000] #18 [0100200000 - 0105800000] MEMMAP 0 [ 0.000000] #19 [0001d97340 - 0001daf340] BOOTMEM [ 0.000000] #20 [0001daf340 - 0001dc7340] BOOTMEM [ 0.000000] #21 [0001dc7340 - 0001ddf340] BOOTMEM [ 0.000000] #22 [0001de0000 - 0001de1000] BOOTMEM [ 0.000000] #23 [0001ddf340 - 0001ddf381] BOOTMEM [ 0.000000] #24 [0001ddf3c0 - 0001ddf403] BOOTMEM [ 0.000000] #25 [0001ddf440 - 0001ddf830] BOOTMEM [ 0.000000] #26 [0001ddf840 - 0001ddf8a8] BOOTMEM [ 0.000000] #27 [0001ddf8c0 - 0001ddf928] BOOTMEM [ 0.000000] #28 [0001ddf940 - 0001ddf9a8] BOOTMEM [ 0.000000] #29 [0001ddf9c0 - 0001ddfa28] BOOTMEM [ 0.000000] #30 [0001ddfa40 - 0001ddfaa8] BOOTMEM [ 0.000000] #31 [0001ddfac0 - 0001ddfb28] BOOTMEM [ 0.000000] #32 [0001ddfb40 - 0001ddfba8] BOOTMEM [ 0.000000] #33 [0001ddfbc0 - 0001ddfc28] BOOTMEM [ 0.000000] #34 [0001ddfc40 - 0001ddfca8] BOOTMEM [ 0.000000] #35 [0001ddfcc0 - 0001ddfd28] BOOTMEM [ 0.000000] #36 [0001ddfd40 - 0001ddfda8] BOOTMEM [ 0.000000] #37 [0001ddfdc0 - 0001ddfe28] BOOTMEM [ 0.000000] #38 [0001ddfe40 - 0001ddfea8] BOOTMEM [ 0.000000] #39 [0001ddfec0 - 0001ddff28] BOOTMEM [ 0.000000] #40 [0001ddff40 - 0001ddffa8] BOOTMEM [ 0.000000] #41 [0001de1000 - 0001de1068] BOOTMEM [ 0.000000] #42 [0001de1080 - 0001de10e8] BOOTMEM [ 0.000000] #43 [0001d95fc0 - 0001d95fe0] BOOTMEM [ 0.000000] #44 [0001ddffc0 - 0001ddffe0] BOOTMEM [ 0.000000] #45 [0001de1100 - 0001de1120] BOOTMEM [ 0.000000] #46 [0001de1140 - 0001de11b9] BOOTMEM [ 0.000000] #47 [0001de11c0 - 0001de1239] BOOTMEM [ 0.000000] #48 [0001e00000 - 0001e1c000] BOOTMEM [ 0.000000] #49 [0001e40000 - 0001e5c000] BOOTMEM [ 0.000000] #50 [0001e80000 - 0001e9c000] BOOTMEM [ 0.000000] #51 [0001ec0000 - 0001edc000] BOOTMEM [ 0.000000] #52 [0001f00000 - 0001f1c000] BOOTMEM [ 0.000000] #53 [0001f40000 - 0001f5c000] BOOTMEM [ 0.000000] #54 [0001f80000 - 0001f9c000] BOOTMEM [ 0.000000] #55 [0001fc0000 - 0001fdc000] BOOTMEM [ 0.000000] #56 [0001de3240 - 0001de3248] BOOTMEM [ 0.000000] #57 [0001de3280 - 0001de3288] BOOTMEM [ 0.000000] #58 [0001de32c0 - 0001de32e0] BOOTMEM [ 0.000000] #59 [0001de3300 - 0001de3340] BOOTMEM [ 0.000000] #60 [0001de3340 - 0001de3460] BOOTMEM [ 0.000000] #61 [0001de3480 - 0001de34c8] BOOTMEM [ 0.000000] #62 [0001de3500 - 0001de3548] BOOTMEM [ 0.000000] #63 [0001de3580 - 0001deb580] BOOTMEM [ 0.000000] #64 [0001de1240 - 0001de1580] BOOTMEM [ 0.000000] #65 [0001fdc000 - 0005fdc000] BOOTMEM [ 0.000000] #66 [0001e1c000 - 0001e3c000] BOOTMEM [ 0.000000] #67 [0005fdc000 - 000601c000] BOOTMEM [ 0.000000] #68 [000001d800 - 0000025800] BOOTMEM [ 0.000000] Memory: 6049864k/7862272k available (4775k kernel code, 1624268k absent, 188140k reserved, 6607k data, 896k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:33024 nr_irqs:472 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2394.765 MHz processor. [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.53 BogoMIPS (lpj=2394765) [ 0.000057] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.000117] Security Framework initialized [ 0.000128] AppArmor: AppArmor initialized [ 0.000631] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.002309] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003033] Mount-cache hash table entries: 256 [ 0.003131] CPU: Physical Processor ID: 0 [ 0.003132] CPU: Processor Core ID: 0 [ 0.003138] mce: CPU supports 7 MCE banks [ 0.003147] CPU0: Thermal monitoring handled by SMI [ 0.003152] using mwait in idle threads. [ 0.003154] Performance Events: generic architected perfmon, Intel PMU driver. [ 0.003157] ... version: 3 [ 0.003158] ... bit width: 48 [ 0.003159] ... generic registers: 4 [ 0.003160] ... value mask: 0000ffffffffffff [ 0.003161] ... max period: 000000007fffffff [ 0.003162] ... fixed-purpose events: 3 [ 0.003163] ... event mask: 000000070000000f [ 0.003228] Unpacking initramfs... [ 0.117131] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.117136] Modules linked in: [ 0.117139] Pid: 0, comm: swapper Not tainted 2.6.34-12-desktop #1 [ 0.117141] Call Trace: [ 0.117152] [] dump_trace+0x79/0x340 [ 0.117157] [] dump_stack+0x69/0x6f [ 0.117161] [] thread_return+0x230/0x375 [ 0.117166] [] cond_resched+0x25/0x40 [ 0.117170] [] _cond_resched+0x2c/0x40 [ 0.117175] [] truncate_inode_pages_range+0x178/0x3c0 [ 0.117179] [] truncate_pagecache+0x40/0x70 [ 0.117182] [] vmtruncate+0x47/0x80 [ 0.117187] [] inode_setattr+0x2e/0x170 [ 0.117191] [] notify_change+0x2f6/0x390 [ 0.117196] [] do_truncate+0x5a/0x90 [ 0.117200] [] do_sys_ftruncate.clone.0+0xf5/0x140 [ 0.117205] [] do_name+0x104/0x285 [ 0.117209] [] write_buffer+0x1d/0x2b [ 0.117212] [] flush_buffer+0x61/0x7b [ 0.117216] [] gunzip+0x301/0x3ab [ 0.117220] [] unpack_to_rootfs+0x1a3/0x2d4 [ 0.117223] [] populate_rootfs+0x5b/0x10a [ 0.117226] [] start_kernel+0x3ac/0x3c6 [ 0.117229] [] x86_64_start_kernel+0xeb/0xf1 [ 0.137398] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.137403] Modules linked in: [ 0.137405] Pid: 0, comm: swapper Not tainted 2.6.34-12-desktop #1 [ 0.137407] Call Trace: [ 0.137417] [] dump_trace+0x79/0x340 [ 0.137422] [] dump_stack+0x69/0x6f [ 0.137426] [] thread_return+0x230/0x375 [ 0.137431] [] __cond_resched+0x25/0x40 [ 0.137435] [] _cond_resched+0x2c/0x40 [ 0.137440] [] truncate_inode_pages_range+0x178/0x3c0 [ 0.137445] [] truncate_pagecache+0x40/0x70 [ 0.137447] [] vmtruncate+0x47/0x80 [ 0.137452] [] inode_setattr+0x2e/0x170 [ 0.137456] [] notify_change+0x2f6/0x390 [ 0.137461] [] do_truncate+0x5a/0x90 [ 0.137465] [] do_sys_ftruncate.clone.0+0xf5/0x140 [ 0.137470] [] do_name+0x104/0x285 [ 0.137473] [] write_buffer+0x1d/0x2b [ 0.137476] [] flush_buffer+0x61/0x7b [ 0.137480] [] gunzip+0x301/0x3ab [ 0.137484] [] unpack_to_rootfs+0x1a3/0x2d4 [ 0.137487] [] populate_rootfs+0x5b/0x10a [ 0.137490] [] start_kernel+0x3ac/0x3c6 [ 0.137493] [] x86_64_start_kernel+0xeb/0xf1 [ 0.137763] BUG: scheduling while atomic: swapper/0/0x10000002 [ 0.137766] Modules linked in: [ 0.137768] Pid: 0, comm: swapper Not tainted 2.6.34-12-desktop #1 [ 0.137769] Call Trace: [ 0.137774] [] dump_trace+0x79/0x340 [ 0.137777] [] dump_stack+0x69/0x6f [ 0.137781] [] thread_return+0x230/0x375 [ 0.137784] [] cond_resched+0x25/0x40 [ 0.137788] [] _cond_resched+0x2c/0x40 [ 0.137792] [] truncate_inode_pages_range+0x178/0x3c0 [ 0.137796] [] truncate_pagecache+0x40/0x70 [ 0.137798] [] vmtruncate+0x47/0x80 [ 0.137802] [] inode_setattr+0x2e/0x170 [ 0.137806] [] notify_change+0x2f6/0x390 [ 0.137810] [] do_truncate+0x5a/0x90 [ 0.137813] [] do_sys_ftruncate.clone.0+0xf5/0x140 [ 0.137817] [] do_name+0x104/0x285 [ 0.137820] [] write_buffer+0x1d/0x2b [ 0.137823] [] flush_buffer+0x61/0x7b [ 0.137826] [] gunzip+0x301/0x3ab [ 0.137829] [] unpack_to_rootfs+0x1a3/0x2d4 [ 0.137832] [] populate_rootfs+0x5b/0x10a [ 0.137835] [] start_kernel+0x3ac/0x3c6 [ 0.137838] [] x86_64_start_kernel+0xeb/0xf1 [ 0.299171] Freeing initrd memory: 18832k freed [ 0.301266] ACPI: Core revision 20100121 [ 0.335615] Not enabling x2apic, Intr-remapping init failed. [ 0.335618] Setting APIC routing to flat [ 0.335977] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.345968] CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz stepping 07 [ 0.453317] Booting Node 0, Processors #1 [ 0.524215] CPU1: Thermal monitoring handled by SMI [ 0.544502] #2 [ 0.615067] CPU2: Thermal monitoring handled by SMI [ 0.635363] #3 [ 0.705919] CPU3: Thermal monitoring handled by SMI [ 0.725995] Brought up 4 CPUs [ 0.726001] Total of 4 processors activated (19155.23 BogoMIPS). [ 0.733039] devtmpfs: initialized [ 0.735787] regulator: core version 0.5 [ 0.735854] regulator: dummy: [ 0.735885] Time: 20:41:17 Date: 04/18/12 [ 0.736003] NET: Registered protocol family 16 [ 0.736225] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.736230] ACPI: bus type pci registered [ 0.736348] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff](base 0xe0000000) [ 0.736355] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.852267] PCI: Using configuration type 1 for base access [ 0.857960] bio: create slab at 0 [ 0.867071] ACPI: EC: Look up EC in DSDT [ 0.872538] ACPI: Executed 1 blocks of module-level executable AML code [ 0.883622] ACPI: BIOS _OSI(Linux) query ignored [ 0.887387] ACPI: SSDT 000000009ce70798 00727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.890239] ACPI: SSDT 000000009ce71a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.892290] ACPI: SSDT 000000009ce6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.902557] ACPI: Interpreter enabled [ 0.902570] ACPI: (supports S0 S3 S4 S5) [ 0.902649] ACPI: Using IOAPIC for interrupt routing [ 0.922170] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.923130] ACPI: No dock devices found. [ 0.923136] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.924962] SB.PCI0:_OSC invalid UUID [ 0.924966] _OSC request data:1 8 1f [ 0.924975] ACPI: PCI Root Bridge PCI0 [ 0.927788] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.927795] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.927801] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.927809] pci_root PNP0A08:00: host bridge window [mem 0x9fa00000-0xfeafffff] [ 0.927957] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.927963] pci 0000:00:01.0: PME# disabled [ 0.928042] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold [ 0.928048] pci 0000:00:01.1: PME# disabled [ 0.928125] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold [ 0.928131] pci 0000:00:01.2: PME# disabled [ 0.928192] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.928205] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.928214] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f] [ 0.928366] pci 0000:00:16.0: reg 10: [mem 0xc3604000-0xc360400f 64bit] [ 0.928459] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.928467] pci 0000:00:16.0: PME# disabled [ 0.928578] pci 0000:00:1a.0: reg 10: [mem 0xc3609000-0xc36093ff] [ 0.928689] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.928697] pci 0000:00:1a.0: PME# disabled [ 0.928774] pci 0000:00:1b.0: reg 10: [mem 0xc3600000-0xc3603fff 64bit] [ 0.928872] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.928880] pci 0000:00:1b.0: PME# disabled [ 0.929038] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.929046] pci 0000:00:1c.0: PME# disabled [ 0.929207] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.929216] pci 0000:00:1c.1: PME# disabled [ 0.929375] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.929383] pci 0000:00:1c.2: PME# disabled [ 0.929485] pci 0000:00:1d.0: reg 10: [mem 0xc3608000-0xc36083ff] [ 0.929600] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.929609] pci 0000:00:1d.0: PME# disabled [ 0.929863] pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f] [ 0.929876] pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097] [ 0.929890] pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087] [ 0.929903] pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093] [ 0.929916] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f] [ 0.929930] pci 0000:00:1f.2: reg 24: [mem 0xc3607000-0xc36077ff] [ 0.930007] pci 0000:00:1f.2: PME# supported from D3hot [ 0.930015] pci 0000:00:1f.2: PME# disabled [ 0.930082] pci 0000:00:1f.3: reg 10: [mem 0xc3605000-0xc36050ff 64bit] [ 0.930114] pci 0000:00:1f.3: reg 20: [io 0x5040-0x505f] [ 0.930259] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.930280] pci 0000:01:00.0: reg 18: [mem 0xc2600000-0xc261ffff 64bit] [ 0.930293] pci 0000:01:00.0: reg 20: [io 0x4000-0x40ff] [ 0.930314] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.930358] pci 0000:01:00.0: supports D1 D2 [ 0.930386] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.930393] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.930399] pci 0000:00:01.0: bridge window [mem 0xc2600000-0xc35fffff] [ 0.930408] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 0.930461] pci 0000:00:01.1: PCI bridge to [bus 02-02] [ 0.930468] pci 0000:00:01.1: bridge window io 0xf000-0x0000 [ 0.930474] pci 0000:00:01.1: bridge window mem 0xfff00000-0x000fffff [ 0.930483] pci 0000:00:01.1: bridge window mem 0xfff00000-0x000fffff pref [ 0.930542] pci 0000:00:01.2: PCI bridge to [bus 03-03] [ 0.930549] pci 0000:00:01.2: bridge window io 0xf000-0x0000 [ 0.930555] pci 0000:00:01.2: bridge window mem 0xfff00000-0x000fffff [ 0.930563] pci 0000:00:01.2: bridge window mem 0xfff00000-0x000fffff pref [ 0.930746] pci 0000:04:00.0: reg 10: [mem 0xc2500000-0xc250ffff 64bit] [ 0.930892] pci 0000:04:00.0: supports D1 [ 0.930895] pci 0000:04:00.0: PME# supported from D0 D1 D3hot [ 0.930910] pci 0000:04:00.0: PME# disabled [ 0.930970] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.930978] pci 0000:00:1c.0: bridge window io 0xf000-0x0000 [ 0.930987] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff] [ 0.931001] pci 0000:00:1c.0: bridge window mem 0xfff00000-0x000fffff pref [ 0.931155] pci 0000:05:00.0: reg 10: [io 0x3000-0x30ff] [ 0.931195] pci 0000:05:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 0.931223] pci 0000:05:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.931314] pci 0000:05:00.0: supports D1 D2 [ 0.931318] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.931327] pci 0000:05:00.0: PME# disabled [ 0.931378] pci 0000:00:1c.1: PCI bridge to [bus 05-05] [ 0.931387] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.931396] pci 0000:00:1c.1: bridge window mem 0xfff00000-0x000fffff [ 0.931409] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.931568] pci 0000:06:00.0: reg 10: [mem 0xc1500000-0xc1500fff] [ 0.931710] pci 0000:06:00.0: supports D1 D2 [ 0.931714] pci 0000:06:00.0: PME# supported from D1 D2 D3hot [ 0.931723] pci 0000:06:00.0: PME# disabled [ 0.931762] pci 0000:00:1c.2: PCI bridge to [bus 06-06] [ 0.931771] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.931779] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff] [ 0.931793] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.931854] ACPI: PCI Interrupt Routing Table [SB.PCI0._PRT] [ 0.932394] ACPI: PCI Interrupt Routing Table [SB.PCI0.RP01._PRT] [ 0.932590] ACPI: PCI Interrupt Routing Table [SB.PCI0.RP02._PRT] [ 0.932809] ACPI: PCI Interrupt Routing Table [SB.PCI0.RP03._PRT] [ 0.933081] ACPI: PCI Interrupt Routing Table [SB.PCI0.PEG0._PRT] [ 0.933589] SB.PCI0:_OSC invalid UUID [ 0.933592] _OSC request data:1 19 1f [ 0.947877] ACPI: PCI Interrupt Link [LNKA](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.948258] ACPI: PCI Interrupt Link [LNKB](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.948645] ACPI: PCI Interrupt Link [LNKC](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.949025] ACPI: PCI Interrupt Link [LNKD](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.949399] ACPI: PCI Interrupt Link [LNKE](IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.949786] ACPI: PCI Interrupt Link [LNKF](IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.950164] ACPI: PCI Interrupt Link [LNKG](IRQs 1 3 4 5 6 10 11 12 14 15) [ 0.950543] ACPI: PCI Interrupt Link [LNKH](IRQs 1 3 4 5 6 10 11 12 14 15) 0, disabled. [ 0.950845] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.950866] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.950874] vgaarb: loaded [ 0.950925] usbcore: registered new interface driver usbfs [ 0.950953] usbcore: registered new interface driver hub [ 0.951025] usbcore: registered new device driver usb [ 0.951155] PCI: Using ACPI for IRQ routing [ 0.951159] PCI: pci_cache_line_size set to 64 bytes [ 0.951311] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.951316] reserve RAM buffer: 000000009ce3f000 - 000000009fffffff [ 0.951323] reserve RAM buffer: 000000009d000000 - 000000009fffffff [ 0.951328] reserve RAM buffer: 00000001dfe00000 - 00000001dfffffff [ 0.951488] NetLabel: Initializing [ 0.951492] NetLabel: domain hash size = 128 [ 0.951494] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.951523] NetLabel: unlabeled traffic allowed by default [ 0.951538] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.951551] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.953595] Switching to clocksource tsc [ 0.956379] AppArmor: AppArmor Filesystem Enabled [ 0.956410] pnp: PnP ACPI init [ 0.956433] ACPI: bus type pnp registered [ 0.962616] pnp: PnP ACPI: found 11 devices [ 0.962620] ACPI: ACPI bus type pnp unregistered [ 0.962644] system 00:05: [io 0x0680-0x069f] has been reserved [ 0.962651] system 00:05: [io 0x1004-0x1013] has been reserved [ 0.962656] system 00:05: [io 0xffff] has been reserved [ 0.962661] system 00:05: [io 0xffff] has been reserved [ 0.962666] system 00:05: [io 0x0400-0x0453] has been reserved [ 0.962671] system 00:05: [io 0x0454-0x0457] has been reserved [ 0.962676] system 00:05: [io 0x0458-0x047f] has been reserved [ 0.962682] system 00:05: [io 0x0500-0x057f] has been reserved [ 0.962687] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.962692] system 00:05: [io 0x0380-0x0387] has been reserved [ 0.962707] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.962713] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.962718] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.962723] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.962729] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 0.962734] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.962740] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.962749] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.962755] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.962760] system 00:09: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.962771] system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved [ 0.962777] system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved [ 0.967810] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] [ 0.967904] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2620000-0xc263ffff pref] [ 0.967910] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.967915] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.967922] pci 0000:00:01.0: bridge window [mem 0xc2600000-0xc35fffff] [ 0.967929] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 0.967938] pci 0000:00:01.1: PCI bridge to [bus 02-02] [ 0.967941] pci 0000:00:01.1: bridge window [io disabled] [ 0.967948] pci 0000:00:01.1: bridge window [mem disabled] [ 0.967953] pci 0000:00:01.1: bridge window [mem pref disabled] [ 0.967962] pci 0000:00:01.2: PCI bridge to [bus 03-03] [ 0.967965] pci 0000:00:01.2: bridge window [io disabled] [ 0.967971] pci 0000:00:01.2: bridge window [mem disabled] [ 0.967977] pci 0000:00:01.2: bridge window [mem pref disabled] [ 0.967985] pci 0000:00:1c.0: PCI bridge to [bus 04-04] [ 0.967988] pci 0000:00:1c.0: bridge window [io disabled] [ 0.967999] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff] [ 0.968007] pci 0000:00:1c.0: bridge window [mem pref disabled] [ 0.968020] pci 0000:00:1c.1: PCI bridge to [bus 05-05] [ 0.968027] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.968037] pci 0000:00:1c.1: bridge window [mem disabled] [ 0.968046] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bi t pref] [ 0.968059] pci 0000:00:1c.2: PCI bridge to [bus 06-06] [ 0.968065] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.968076] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff] [ 0.968085] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.968112] alloc irq_desc for 16 on node -1 [ 0.968115] alloc kstat_irqs on node -1 [ 0.968127] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.968134] pci 0000:00:01.0: setting latency timer to 64 [ 0.968145] pci 0000:00:01.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.968150] pci 0000:00:01.1: setting latency timer to 64 [ 0.968161] pci 0000:00:01.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.968166] pci 0000:00:01.2: setting latency timer to 64 [ 0.968182] alloc irq_desc for 17 on node -1 [ 0.968185] alloc kstat_irqs on node -1 [ 0.968192] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.968201] pci 0000:00:1c.0: setting latency timer to 64 [ 0.968218] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.968227] pci 0000:00:1c.1: setting latency timer to 64 [ 0.968243] alloc irq_desc for 18 on node -1 [ 0.968246] alloc kstat_irqs on node -1 [ 0.968253] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.968261] pci 0000:00:1c.2: setting latency timer to 64 [ 0.968269] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.968274] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.968278] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.968283] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff] [ 0.968287] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.968292] pci_bus 0000:01: resource 1 [mem 0xc2600000-0xc35fffff] [ 0.968296] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] [ 0.968302] pci_bus 0000:04: resource 1 [mem 0xc2500000-0xc25fffff] [ 0.968306] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.968310] pci_bus 0000:05: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.968315] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff] [ 0.968319] pci_bus 0000:06: resource 1 [mem 0xc1500000-0xc24fffff] [ 0.968324] pci_bus 0000:06: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.968449] NET: Registered protocol family 2 [ 0.968962] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.971329] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.975064] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.975396] TCP: Hash tables configured (established 524288 bind 65536) [ 0.975400] TCP reno registered [ 0.975444] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.975546] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.975832] NET: Registered protocol family 1 [ 0.975871] pci 0000:00:02.0: Boot video device [ 0.997457] PCI: CLS 64 bytes, default 64 [ 0.997461] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.997466] Placing 64MB software IO TLB between ffff880001fdc000 - ffff880005fdc000 [ 0.997470] software IO TLB at phys 0x1fdc000 - 0x5fdc000 [ 0.997588] Simple Boot Flag at 0x44 set to 0x1 [ 0.998327] Scanning for low memory corruption every 60 seconds [ 0.998622] audit: initializing netlink socket (disabled) [ 0.998646] type=2000 audit(1334781676.864:1): initialized [ 1.030829] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.031470] VFS: Disk quotas dquot_6.5.2 [ 1.031523] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.031829] msgmni has been set to 2963 [ 1.032109] alg: No test for stdrng (krng) [ 1.032169] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.032174] io scheduler noop registered [ 1.032178] io scheduler deadline registered [ 1.032219] io scheduler cfq registered (default) [ 1.032542] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.032586] alloc irq_desc for 24 on node -1 [ 1.032590] alloc kstat_irqs on node -1 [ 1.032606] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 1.032708] pcieport 0000:00:01.1: setting latency timer to 64 [ 1.032747] alloc irq_desc for 25 on node -1 [ 1.032751] alloc kstat_irqs on node -1 [ 1.032761] pcieport 0000:00:01.1: irq 25 for MSI/MSI-X [ 1.032850] pcieport 0000:00:01.2: setting latency timer to 64 [ 1.032890] alloc irq_desc for 26 on node -1 [ 1.032893] alloc kstat_irqs on node -1 [ 1.032903] pcieport 0000:00:01.2: irq 26 for MSI/MSI-X [ 1.033004] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.033078] alloc irq_desc for 27 on node -1 [ 1.033081] alloc kstat_irqs on node -1 [ 1.033097] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X [ 1.033225] pcieport 0000:00:1c.1: setting latency timer to 64 [ 1.033299] alloc irq_desc for 28 on node -1 [ 1.033302] alloc kstat_irqs on node -1 [ 1.033317] pcieport 0000:00:1c.1: irq 28 for MSI/MSI-X [ 1.033453] pcieport 0000:00:1c.2: setting latency timer to 64 [ 1.033528] alloc irq_desc for 29 on node -1 [ 1.033532] alloc kstat_irqs on node -1 [ 1.033547] pcieport 0000:00:1c.2: irq 29 for MSI/MSI-X [ 1.033716] pcieport 0000:00:01.0: Requesting control of PCIe PME from ACPI BIOS [ 1.034026] SB.PCI0:_OSC invalid UUID [ 1.034029] _OSC request data:1 0 1f [ 1.034037] pcieport 0000:00:01.0: Failed to receive control of PCIe PME service: ACPI _OSC failed [ 1.034047] pcie_pme: probe of 0000:00:01.0:pcie01 failed with error -13 [ 1.034057] pcieport 0000:00:01.1: Requesting control of PCIe PME from ACPI BIOS [ 1.034287] SB.PCI0:_OSC invalid UUID [ 1.034290] _OSC request data:1 0 1f [ 1.034298] pcieport 0000:00:01.1: Failed to receive control of PCIe PME service: ACPI _OSC failed [ 1.034305] pcie_pme: probe of 0000:00:01.1:pcie01 failed with error -13 [ 1.034313] pcieport 0000:00:01.2: Requesting control of PCIe PME from ACPI BIOS [ 1.034548] SB.PCI0:_OSC invalid UUID [ 1.034551] _OSC request data:1 0 1f [ 1.034558] pcieport 0000:00:01.2: Failed to receive control of PCIe PME service: ACPI _OSC failed [ 1.034565] pcie_pme: probe of 0000:00:01.2:pcie01 failed with error -13 [ 1.034574] pcieport 0000:00:1c.0: Requesting control of PCIe PME from ACPI BIOS [ 1.034791] SB.PCI0:_OSC invalid UUID [ 1.034794] _OSC request data:1 0 1f [ 1.034801] pcieport 0000:00:1c.0: Failed to receive control of PCIe PME service: ACPI _OSC failed [ 1.034807] pcie_pme: probe of 0000:00:1c.0:pcie01 failed with error -13 [ 1.034815] pcieport 0000:00:1c.1: Requesting control of PCIe PME from ACPI BIOS [ 1.035031] SB.PCI0:_OSC invalid UUID [ 1.035034] _OSC request data:1 0 1f [ 1.035041] pcieport 0000:00:1c.1: Failed to receive control of PCIe PME service: ACPI _OSC failed [ 1.035047] pcie_pme: probe of 0000:00:1c.1:pcie01 failed with error -13 [ 1.035055] pcieport 0000:00:1c.2: Requesting control of PCIe PME from ACPI BIOS [ 1.035272] SB.PCI0:_OSC invalid UUID [ 1.035275] _OSC request data:1 0 1f [ 1.035282] pcieport 0000:00:1c.2: Failed to receive control of PCIe PME service: ACPI _OSC failed [ 1.035288] pcie_pme: probe of 0000:00:1c.2:pcie01 failed with error -13 [ 1.035353] pci-stub: invalid id string "" [ 1.036890] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90011800000, using 3072k, total 32704k [ 1.036896] vesafb: mode is 1024x768x16, linelength=2048, pages=20 [ 1.036900] vesafb: scrolling: redraw [ 1.036905] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 1.037133] bootsplash 3.1.6-2004/03/31: looking for picture... [ 1.037138] bootsplash: silentjpeg size 157558 bytes [ 1.068693] bootsplash: ...found (1024x768, 80639 bytes, v3). [ 1.211801] Console: switching to colour frame buffer device 124x44 [ 1.353795] fb0: VESA VGA frame buffer device [ 1.356619] Non-volatile memory driver v1.3 [ 1.356624] Linux agpgart interface v0.103 [ 1.356664] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.357535] Fixed MDIO Bus: probed [ 1.357545] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.357583] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.357620] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.357627] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.357671] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.357721] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.361618] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 1.361651] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc3609000 [ 1.371190] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.371243] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.371248] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.371253] usb usb1: Product: EHCI Host Controller [ 1.371257] usb usb1: Manufacturer: Linux 2.6.34-12-desktop ehci_hcd [ 1.371260] usb usb1: SerialNumber: 0000:00:1a.0 [ 1.371441] hub 1-0:1.0: USB hub found [ 1.371450] hub 1-0:1.0: 2 ports detected [ 1.371567] alloc irq_desc for 21 on node -1 [ 1.371571] alloc kstat_irqs on node -1 [ 1.371584] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.371610] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.371616] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.371630] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.371677] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.375572] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 1.375597] ehci_hcd 0000:00:1d.0: irq 21, io mem 0xc3608000 [ 1.385166] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.385210] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.385214] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.385219] usb usb2: Product: EHCI Host Controller [ 1.385222] usb usb2: Manufacturer: Linux 2.6.34-12-desktop ehci_hcd [ 1.385226] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.385381] hub 2-0:1.0: USB hub found [ 1.385390] hub 2-0:1.0: 2 ports detected [ 1.385492] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.385517] uhci_hcd: USB Universal Host Controller Interface driver [ 1.385659] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.394428] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.394441] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.394553] mice: PS/2 mouse device common for all mice [ 1.394718] rtc_cmos 00:06: RTC can wake from S4 [ 1.394786] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 1.394829] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.394848] cpuidle: using governor ladder [ 1.394852] cpuidle: using governor menu [ 1.395331] usbcore: registered new interface driver hiddev [ 1.395357] usbcore: registered new interface driver usbhid [ 1.395360] usbhid: USB HID core driver [ 1.407676] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.603244] TCP cubic registered [ 1.603375] NET: Registered protocol family 10 [ 1.604010] lo: Disabled Privacy Extensions [ 1.604363] lib80211: common routines for IEEE802.11 drivers [ 1.604368] lib80211_crypt: registered algorithm 'NULL' [ 1.604515] PM: Resume from disk failed. [ 1.604534] registered taskstats version 1 [ 1.605158] Magic number: 8:594:700 [ 1.605253] rtc_cmos 00:06: setting system clock to 2012-04-18 20:41:18 UTC (1334781678) [ 1.605471] Freeing unused kernel memory: 896k freed [ 1.605748] Write protecting the kernel read-only data: 10240k [ 1.606167] Freeing unused kernel memory: 1352k freed [ 1.606681] Freeing unused kernel memory: 636k freed [ 1.806670] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.822996] udev: starting version 157 [ 1.925262] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.925274] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.925717] hub 1-1:1.0: USB hub found [ 1.926234] hub 1-1:1.0: 6 ports detected [ 1.942711] SCSI subsystem initialized [ 1.977624] libata version 3.00 loaded. [ 1.985573] ahci 0000:00:1f.2: version 3.0 [ 1.985611] alloc irq_desc for 19 on node -1 [ 1.985616] alloc kstat_irqs on node -1 [ 1.985631] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.985731] alloc irq_desc for 30 on node -1 [ 1.985735] alloc kstat_irqs on node -1 [ 1.985753] ahci 0000:00:1f.2: irq 30 for MSI/MSI-X [ 1.996455] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode [ 1.996462] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 1.996472] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.998526] scsi0 : ahci [ 1.998742] scsi1 : ahci [ 1.998886] scsi2 : ahci [ 1.999026] scsi3 : ahci [ 1.999180] scsi4 : ahci [ 1.999320] scsi5 : ahci [ 1.999654] ata1: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607100 irq 30 [ 1.999659] ata2: DUMMY [ 1.999661] ata3: DUMMY [ 1.999664] ata4: DUMMY [ 1.999669] ata5: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607300 irq 30 [ 1.999672] ata6: DUMMY [ 2.023420] Unable to query Synaptics hardware. [ 2.030313] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.144420] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 2.144426] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.144731] hub 2-1:1.0: USB hub found [ 2.144799] hub 2-1:1.0: 6 ports detected [ 2.303891] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.303922] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.304281] ata1.00: ATA-8: TOSHIBA MK5076GSX, GS001C, max UDMA/100 [ 2.304287] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.304716] ata1.00: configured for UDMA/100 [ 2.315048] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK5076GS GS00 PQ: 0 ANSI: 5 [ 2.321418] ata5.00: ATAPI: hp DVD-RAM UJ8B1, H.02, max UDMA/100, ATAPI AN [ 2.338553] ata5.00: configured for UDMA/100 [ 2.353638] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8B1 H.02 PQ: 0 ANSI: 5 [ 2.368271] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.368636] sd 0:0:0:0: [sda] Write Protect is off [ 2.368647] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.368717] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.369083] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.378370] Uniform CD-ROM driver Revision: 3.20 [ 2.378562] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.407907] usb 2-1.5: new high speed USB device using ehci_hcd and address 3 [ 2.540077] usb 2-1.5: New USB device found, idVendor=05c8, idProduct=021e [ 2.540083] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.540087] usb 2-1.5: Product: HP Webcam-101 [ 2.540091] usb 2-1.5: Manufacturer: HP Webcam-101 [ 2.540095] usb 2-1.5: SerialNumber: HP Webcam-101 [ 2.724784] sda1 sda2 sda3 sda4 [ 2.725520] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.733017] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.733209] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.863604] input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1 [ 20.031601] brd: module loaded [ 20.043072] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 20.057692] device-mapper: uevent: version 1.0.3 [ 20.057931] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 20.152484] st: Version 20081215, fixed bufsize 32768, s/g segs 256 [ 22.157404] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 22.197170] ISO 9660 Extensions: RRIP_1991A [ 22.695031] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 22.734791] ISO 9660 Extensions: RRIP_1991A [ 22.742530] fuse init (API version 7.13) [ 24.627078] loop: module loaded [ 24.641910] EXT4-fs (loop0): barriers disabled [ 24.642212] EXT4-fs (loop0): mounted filesystem with ordered data mode [ 33.063146] udev: starting version 157 [ 37.632371] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 37.632745] ACPI: Lid Switch [LID0] [ 37.632804] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 37.632836] ACPI: Power Button [PWRB] [ 37.632941] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 37.632997] ACPI: Power Button [PWRF] [ 37.633399] ACPI: AC Adapter ACAD [ 38.274294] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 38.334113] ACPI: Battery Slot [BAT0](battery present) [ 38.697771] iTCO_vendor_support: vendor-support=0 [ 39.311215] ACPI: WMI: Mapper loaded [ 39.463479] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 39.463554] ACPI: resource 0000:00:1f.3 [io 0x5040-0x505f] conflicts with ACPI region SMBI [io 0x5040-0x504f disabled] [ 39.463615] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 40.255370] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 40.255458] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 40.255585] r8169 0000:05:00.0: setting latency timer to 64 [ 40.255592] r8169 0000:05:00.0: (unregistered net_device): unknown MAC, using family default [ 40.255711] alloc irq_desc for 31 on node -1 [ 40.255713] alloc kstat_irqs on node -1 [ 40.255736] r8169 0000:05:00.0: irq 31 for MSI/MSI-X [ 40.256021] r8169 0000:05:00.0: eth0: RTL8101e at 0xffffc90011bda000, 10:1f:74:c9:d4:1e, XID 00a00000 IRQ 31 [ 40.699430] cfg80211: Calling CRDA to update world regulatory domain [ 40.703771] Monitor-Mwait will be used to enter C-1 state [ 40.703795] Monitor-Mwait will be used to enter C-2 state [ 41.365745] [Firmware Bug]: Invalid critical threshold (0) [ 41.367164] thermal LNXTHERM:01: registered as thermal_zone0 [ 41.367214] ACPI: Thermal Zone [TZ01](49 C) [ 41.622629] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100121/dsopcode-596) [ 41.622715] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.HWMC](Node ffff8801dba2e990), AE_AML_BUFFER_LIMIT [ 41.622895] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.WMAD](Node ffff8801dba306d0), AE_AML_BUFFER_LIMIT [ 41.623056] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100121/dsopcode-596) [ 41.623102] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.HWMC](Node ffff8801dba2e990), AE_AML_BUFFER_LIMIT [ 41.623210] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.WMAD](Node ffff8801dba306d0), AE_AML_BUFFER_LIMIT [ 41.623352] input: HP WMI hotkeys as /devices/virtual/input/input6 [ 41.623890] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100121/dsopcode-596) [ 41.623966] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.HWMC](Node ffff8801dba2e990), AE_AML_BUFFER_LIMIT [ 41.624142] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.WMAD](Node ffff8801dba306d0), AE_AML_BUFFER_LIMIT [ 41.624393] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100121/dsopcode-596) [ 41.624474] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.HWMC](Node ffff8801dba2e990), AE_AML_BUFFER_LIMIT [ 41.624649] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.WMAD](Node ffff8801dba306d0), AE_AML_BUFFER_LIMIT [ 41.624910] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100121/dsopcode-596) [ 41.624985] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.HWMC](Node ffff8801dba2e990), AE_AML_BUFFER_LIMIT [ 41.625122] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.WMAD](Node ffff8801dba306d0), AE_AML_BUFFER_LIMIT [ 41.625329] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20100121/dsopcode-596) [ 41.625409] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.HWMC](Node ffff8801dba2e990), AE_AML_BUFFER_LIMIT [ 41.625562] ACPI Error (psparse-0537): Method parse/execution failed [SB.WMID.WMAD](Node ffff8801dba306d0), AE_AML_BUFFER_LIMIT [ 41.861231] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 41.861414] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 41.861558] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 43.922494] Linux video capture interface: v2.00 [ 44.920608] cfg80211: World regulatory domain updated: [ 44.920687](start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 44.920762](2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 44.920835](2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 44.920904](2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 44.920972](5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 44.921051](5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 45.266214] uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e) [ 45.280775] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7 [ 45.280882] usbcore: registered new interface driver uvcvideo [ 45.280944] USB Video Class driver (v0.1.0) [ 45.772613] ath9k 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 45.772681] ath9k 0000:04:00.0: setting latency timer to 64 [ 45.825844] ath: EEPROM regdomain: 0x60 [ 45.825848] ath: EEPROM indicates we should expect a direct regpair map [ 45.825850] ath: Country alpha2 being used: 00 [ 45.825851] ath: Regpair used: 0x60 [ 45.950326] alloc irq_desc for 22 on node -1 [ 45.950329] alloc kstat_irqs on node -1 [ 45.950337] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 45.950440] alloc irq_desc for 32 on node -1 [ 45.950441] alloc kstat_irqs on node -1 [ 45.950450] HDA Intel 0000:00:1b.0: irq 32 for MSI/MSI-X [ 45.950479] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 45.956542] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 45.956884] Registered led device: ath9k-phy0::radio [ 45.956902] Registered led device: ath9k-phy0::assoc [ 45.956917] Registered led device: ath9k-phy0::tx [ 45.956934] Registered led device: ath9k-phy0::rx [ 45.956953] phy0: Atheros AR9285 Rev:2 mem=0xffffc90011ea0000, irq=16 [ 46.500510] ALSA patch_sigmatel.c:5359: mute LED gpio 1 polarity 0 [ 46.500517] ALSA hda_codec.c:4358: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 46.500520] ALSA hda_codec.c:4362: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 46.500523] ALSA hda_codec.c:4366: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 46.500526] ALSA hda_codec.c:4367: mono: mono_out=0x0 [ 46.500528] ALSA hda_codec.c:4378: inputs: mic=0x11, fmic=0xc, line=0x0, fline=0x0, cd=0x0, aux=0x0 [ 46.500726] ALSA patch_sigmatel.c:3014: stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0) [ 46.503716] ALSA hda_generic.c:683: hda_generic: no proper input path found [ 46.503720] ALSA hda_generic.c:431: hda_generic: no proper output path found [ 46.504049] ALSA hda_generic.c:1036: hda_generic: no PCM found [ 46.508150] input: HDA Intel PCH Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 46.508277] input: HDA Intel PCH HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 49.365093] type=1505 audit(1334781726.326:2): operation="profile_load" pid=2708 name=/bin/ping [ 49.398806] type=1505 audit(1334781726.359:3): operation="profile_load" pid=2709 name=/sbin/klogd [ 49.467838] type=1505 audit(1334781726.429:4): operation="profile_load" pid=2710 name=/sbin/syslog-ng [ 49.534184] type=1505 audit(1334781726.495:5): operation="profile_load" pid=2711 name=/sbin/syslogd [ 49.606861] type=1505 audit(1334781726.568:6): operation="profile_load" pid=2712 name=/usr/sbin/avahi-daemon [ 49.667638] type=1505 audit(1334781726.629:7): operation="profile_load" pid=2713 name=/usr/sbin/identd [ 49.734044] type=1505 audit(1334781726.695:8): operation="profile_load" pid=2714 name=/usr/sbin/mdnsd [ 49.809658] type=1505 audit(1334781726.771:9): operation="profile_load" pid=2715 name=/usr/sbin/nscd [ 49.919969] type=1505 audit(1334781726.881:10): operation="profile_load" pid=2716 name=/usr/sbin/ntpd [ 49.979408] type=1505 audit(1334781726.941:11): operation="profile_load" pid=2717 name=/usr/sbin/traceroute [ 50.551152] vboxguest: VirtualBox Guest PCI device not found. [ 56.382905] hald-probe-inpu[3122]: segfault at 5 ip 00007f34ecab6f79 sp 00007fffb1325560 error 4 in libc-2.11.2.so[7f34eca3f000+156000] [ 67.298360] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 67.307223] r8169 0000:05:00.0: eth0: link down [ 67.307670] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 68.087568] NET: Registered protocol family 17 [ 80.101272] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold [ 94.047273] bootsplash: status on console 0 changed to on linux@linux:~> lsmod Module Size Used by af_packet 23229 2 vmsync 4288 0 vmblock 13824 1 snd_pcm_oss 53669 0 snd_mixer_oss 19415 1 snd_pcm_oss snd_seq 68137 0 snd_seq_device 7834 1 snd_seq cpufreq_conservative 12628 0 cpufreq_userspace 3264 0 cpufreq_powersave 1258 0 acpi_cpufreq 8399 1 mperf 1523 1 acpi_cpufreq snd_hda_codec_idt 68993 1 arc4 1601 2 ecb 2495 2 snd_hda_intel 28461 2 snd_hda_codec 113025 2 snd_hda_codec_idt,snd_hda_intel ath9k 87594 0 ath9k_common 3581 1 ath9k mac80211 290013 2 ath9k,ath9k_common snd_hwdep 7954 1 snd_hda_codec snd_pcm 105589 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec uvcvideo 67959 0 ath9k_hw 249932 2 ath9k,ath9k_common snd_timer 26828 2 snd_seq,snd_pcm ath 11135 2 ath9k,ath9k_hw snd 84348 14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer videodev 43828 1 uvcvideo soundcore 9003 1 snd

v4l1_compat 17249 2 uvcvideo,videodev iTCO_wdt 12170 0 hp_wmi 7258 0 thermal 20625 0 video 25256 0 processor 45715 5 acpi_cpufreq cfg80211 182659 4 ath9k,ath9k_common,mac80211,ath v4l2_compat_ioctl32 11225 1 videodev r8169 44332 0 i2c_i801 11881 0 intel_agp 33976 0 wmi 8750 1 hp_wmi snd_page_alloc 9569 2 snd_hda_intel,snd_pcm iTCO_vendor_support 3150 1 iTCO_wdt thermal_sys 18230 3 thermal,video,processor pcspkr 2222 0 battery 12302 0 ac 4055 0 button 6989 0 rfkill 21863 2 hp_wmi,cfg80211 ext4 401724 1 jbd2 100410 1 ext4 crc16 1715 1 ext4 loop 18524 2 fuse 75897 3 nls_utf8 1549 1 st 41564 0 dm_mod 86809 0 edd 10208 0 brd 6474 0 sg 33348 0 sr_mod 16684 1 sd_mod 41436 0 cdrom 43440 1 sr_mod ahci 42680 1 libata 211330 1 ahci scsi_mod 191748 5 st,sg,sr_mod,sd_mod,libata linux@linux:~>

[ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0x9d000 max_arch_pfn = 0x400000000 [ 0.000000] e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009d800 (usable) [ 0.000000] modified: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000009ce3f000 (usable) [ 0.000000] modified: 000000009ce3f000 - 000000009cebf000 (reserved) [ 0.000000] modified: 000000009cebf000 - 000000009cfbf000 (ACPI NVS) [ 0.000000] modified: 000000009cfbf000 - 000000009cfff000 (ACPI data) [ 0.000000] modified: 000000009cfff000 - 000000009d000000 (usable) [ 0.000000] modified: 000000009d000000 - 000000009fa00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000feb00000 - 00000000feb04000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 00000001dfe00000 (usable) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0 [ 0.000000] init_memory_mapping: 0000000000000000-000000009d000000 [ 0.000000] 0000000000 - 009d000000 page 2M [ 0.000000] kernel direct mapping tables up to 9d000000 @ 16000-1a000 [ 0.000000] init_memory_mapping: 0000000100000000-00000001dfe00000 [ 0.000000] 0100000000 - 01dfe00000 page 2M [ 0.000000] kernel direct mapping tables up to 1dfe00000 @ 18000-21000 [ 0.000000] RAMDISK: 7ed9c000 - 80000000 [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 000000009cffe120 0008C (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP 000000009cffc000 000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000009cfed000 0BCCB (v01 HP 1672 00000000 MSFT 01000013) [ 0.000000] ACPI: FACS 000000009cf6c000 00040 [ 0.000000] ACPI: ASF! 000000009cffd000 000A5 (v32 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: HPET 000000009cffb000 00038 (v01 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC 000000009cffa000 0008C (v02 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000009cff9000 0003C (v01 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC 000000009cfec000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: MSDM 000000009cfeb000 00055 (v03 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfea000 00D52 (v01 HP 1672 00001000 MSFT 01000013) [ 0.000000] ACPI: BOOT 000000009cfe8000 00028 (v01 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: ASPT 000000009cfe5000 00034 (v07 HP 1672 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000009cfe4000 007C2 (v01 HP 1672 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfe3000 00996 (v01 HP 1672 00003000 INTL 20100121) [ 0.000000] ACPI: SSDT 000000009cfdd000 0219F (v01 HP 1672 00001000 INTL 20100121) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000001dfe00000 [ 0.000000] Initmem setup node 0 0000000000000000-00000001dfe00000 [ 0.000000] NODE_DATA [0000000100000000 - 0000000100013fff] [ 0.000000] [ffffea0000000000-ffffea00069fffff] PMD -> [ffff880100200000-ffff8801057fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x001dfe00 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0009ce3f [ 0.000000] 0: 0x0009cfff -> 0x0009d000 [ 0.000000] 0: 0x00100000 -> 0x001dfe00 [ 0.000000] On node 0 totalpages: 1559501 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3925 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 624248 pages, LIFO batch:31 [ 0.000000] Normal zone: 12537 pages used for memmap [ 0.000000] Normal zone: 904455 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] early_res array is doubled to 64 at [1c000 - 1c7ff] [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000 [ 0.000000] PM: Registered nosave memory: 000000009cebf000

sraue commented 12 years ago

hmmmm for me it looks like it uses the ath9k wlan driver which is included in all our builds, can you now do the same on your openelec system and paste dmesg and lsmod output (maybe the file /var/log/messages too)

haye86 commented 12 years ago

Op 18 april 2012 21:20 schreef Stephan Raue < reply@reply.github.com

het volgende:

hmmmm for me it looks like it uses the ath9k wlan driver which is included in all our builds, can you now do the same on your openelec system and paste dmesg and lsmod output (maybe the file /var/log/messages too)

Reply to this email directly or view it on GitHub: https://github.com/OpenELEC/OpenELEC.tv/issues/137#issuecomment-5206462

Groeten,

H. de Jong

root ~ # lsmod Module Size Used by r8712u 163745 0 nvidia 12218872 62 snd_hda_codec_hdmi 23057 4 snd_hda_codec_realtek 192637 1 ath9k 86058 0 ath9k_common 1778 1 ath9k snd_hda_intel 22531 1 ath9k_hw 342018 2 ath9k_common,ath9k snd_hda_codec 74511 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi coretemp 5522 0 snd_hwdep 5106 1 snd_hda_codec snd_pcm 59417 4 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi snd_timer 17176 1 snd_pcm ath 14363 3 ath9k_hw,ath9k_common,ath9k snd 44496 8 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi xhci_hcd 77228 0 snd_page_alloc 6753 2 snd_pcm,snd_hda_intel uvesafb 20876 3 root ~ #

[ 0.840342] ata1.00: ATA-8: SAMSUNG HN-M101MBB, 2AR10001, max UDMA/133 [ 0.840350] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.847002] ata1.00: configured for UDMA/133 [ 0.847225] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HN-M101M 2AR1 PQ: 0 ANSI: 5 [ 0.847550] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.847592] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 0.847750] sd 0:0:0:0: [sda] Write Protect is off [ 0.847758] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.847819] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.878483] sda: sda1 sda2 [ 0.879066] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.884368] Freeing unused kernel memory: 3924k freed [ 0.886834] Write protecting the kernel read-only data: 8192k [ 0.889427] Freeing unused kernel memory: 360k freed [ 0.892329] Freeing unused kernel memory: 400k freed [ 1.030053] usb 1-6: new high-speed USB device number 3 using ehci_hcd [ 1.053589] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 1.076906] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 1.125008] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.163596] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 1.186909] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities [ 1.412736] scsi2 : usb-storage 1-6:1.0 [ 1.483376] Refined TSC clocksource calibration: 1795.702 MHz. [ 1.483387] Switching to clocksource tsc [ 1.636711] usb 3-2: new low-speed USB device number 2 using uhci_hcd [ 1.646940] EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended [ 1.730926] EXT4-fs (sda2): recovery complete [ 1.731143] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.825614] input: VISENTA V1 2011 VISENTA V1 2011 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input2 [ 1.825784] generic-usb 0003:04B4:06B0.0001: input,hidraw0: USB HID v1.11 Keyboard [VISENTA V1 2011 VISENTA V1 2011] on usb-0000:00:1d.1-2/input0 [ 1.862313] input: VISENTA V1 2011 VISENTA V1 2011 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input3 [ 1.862641] generic-usb 0003:04B4:06B0.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [VISENTA V1 2011 VISENTA V1 2011] on usb-0000:00:1d.1-2/input1 [ 2.416441] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS [ 2.417367] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 2.422673] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 4.692859] uvesafb: NVIDIA Corporation, GT218 Board - 06930000, Chip Rev , OEM: NVIDIA, VBE v3.0 [ 4.782824] uvesafb: VBIOS/hardware doesn't support DDC transfers [ 4.782830] uvesafb: no monitor limits have been set, default refresh rate will be used [ 4.783452] uvesafb: scrolling: redraw [ 4.783469] mtrr: type mismatch for cf000000,1000000 old: write-back new: write-combining [ 4.783476] mtrr: type mismatch for cf000000,800000 old: write-back new: write-combining [ 4.783482] mtrr: type mismatch for cf000000,400000 old: write-back new: write-combining [ 4.783488] mtrr: type mismatch for cf000000,200000 old: write-back new: write-combining [ 4.783494] mtrr: type mismatch for cf000000,100000 old: write-back new: write-combining [ 4.783500] mtrr: type mismatch for cf000000,80000 old: write-back new: write-combining [ 4.783506] mtrr: type mismatch for cf000000,40000 old: write-back new: write-combining [ 4.783512] mtrr: type mismatch for cf000000,20000 old: write-back new: write-combining [ 4.783518] mtrr: type mismatch for cf000000,10000 old: write-back new: write-combining [ 4.783524] mtrr: type mismatch for cf000000,8000 old: write-back new: write-combining [ 4.783530] mtrr: type mismatch for cf000000,4000 old: write-back new: write-combining [ 4.783535] mtrr: type mismatch for cf000000,2000 old: write-back new: write-combining [ 4.783541] mtrr: type mismatch for cf000000,1000 old: write-back new: write-combining [ 5.412545] Console: switching to colour frame buffer device 160x64 [ 5.444566] uvesafb: framebuffer at 0xcf000000, mapped to 0xffffc90010680000, using 10240k, total 14336k [ 5.444592] fb0: VESA VGA frame buffer device

[ 6.353116] udevd[234]: starting version 182 [ 6.535831] xhci_hcd 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.535899] xhci_hcd 0000:01:00.0: setting latency timer to 64 [ 6.535909] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 6.535930] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 6 [ 6.536904] xhci_hcd 0000:01:00.0: irq 16, io mem 0xfe9ff000 [ 6.537540] xhci_hcd 0000:01:00.0: Failed to enable MSI-X [ 6.537627] xhci_hcd 0000:01:00.0: irq 43 for MSI/MSI-X [ 6.538796] xHCI xhci_add_endpoint called for root hub [ 6.538805] xHCI xhci_check_bandwidth called for root hub [ 6.538908] hub 6-0:1.0: USB hub found [ 6.538927] hub 6-0:1.0: 1 port detected [ 6.539070] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 6.539085] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 7 [ 6.539793] xHCI xhci_add_endpoint called for root hub [ 6.539801] xHCI xhci_check_bandwidth called for root hub [ 6.540515] hub 7-0:1.0: USB hub found [ 6.540550] hub 7-0:1.0: 4 ports detected [ 6.612370] coretemp coretemp.0: Using relative temperature scale! [ 6.612411] coretemp coretemp.0: Using relative temperature scale! [ 6.743605] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.743739] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 6.744178] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 6.843379] usb 6-1: new high-speed USB device number 2 using xhci_hcd [ 6.857494] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep [ 6.857649] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep [ 6.858524] hub 6-1:1.0: USB hub found [ 6.858656] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep [ 6.858686] hub 6-1:1.0: 4 ports detected [ 7.106130] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.106152] ath9k 0000:02:00.0: setting latency timer to 64 [ 7.156655] ath: EEPROM regdomain: 0x60 [ 7.156663] ath: EEPROM indicates we should expect a direct regpair map [ 7.156694] ath: Country alpha2 being used: 00 [ 7.156700] ath: Regpair used: 0x60 [ 7.159449] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control' [ 7.160511] Registered led device: ath9k-phy0 [ 7.160533] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90012120000, irq=17 [ 7.166506] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 7.167190] snd_hda_intel 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 7.167199] hda_intel: Disabling MSI [ 7.167353] snd_hda_intel 0000:03:00.1: setting latency timer to 64 [ 7.876697] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 7.903362] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 7.930021] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 7.956691] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 7.970219] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input5 [ 7.970467] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input6 [ 7.970689] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input7 [ 7.970912] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.2/0000:03:00.1/sound/card1/input8 [ 8.712809] nvidia: module license 'NVIDIA' taints kernel. [ 8.712821] Disabling lock debugging due to kernel taint [ 9.555737] nvidia 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.555759] nvidia 0000:03:00.0: setting latency timer to 64 [ 9.555771] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 9.557359] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.33 Sat Mar 17 14:55:45 PDT 2012 [ 12.960921] HDMI hot plug event: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=0 [ 12.967183] HDMI status: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=0 [ 12.987455] HDMI hot plug event: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=1 [ 12.993406] HDMI status: Codec=1 Pin=5 Presence_Detect=1 ELD_Valid=1 [ 13.666701] HDMI: detected monitor SAMSUNG [ 13.666707] at connection type HDMI [ 13.666713] HDMI: available speakers: FL/FR [ 13.666722] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24 [ 23.395353] r8169 0000:04:0b.0: eth0: link down [ 23.395386] r8169 0000:04:0b.0: eth0: link down [ 23.396657] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.499409] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 25.752712] wlan0: authenticate with 00:02:6f:bb:71:28 (try 1) [ 25.754741] wlan0: authenticated [ 25.786313] wlan0: associate with 00:02:6f:bb:71:28 (try 1) [ 25.792400] wlan0: RX AssocResp from 00:02:6f:bb:71:28 (capab=0xc31 status=0 aid=1) [ 25.792408] wlan0: associated [ 25.800038] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 70.665286] EXT4-fs (sda1): re-mounted. Opts: barrier=1,data=ordered,commit=0 [ 70.880291] EXT4-fs (sda2): re-mounted. Opts: barrier=1,data=ordered,commit=0 [ 73.918143] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 2640.430197] cfg80211: Calling CRDA to update world regulatory domain [ 2641.622694] wlan0: authenticate with 00:02:6f:bb:71:28 (try 1) [ 2641.624669] wlan0: authenticated [ 2641.644805] wlan0: associate with 00:02:6f:bb:71:28 (try 1) [ 2641.652393] wlan0: RX ReassocResp from 00:02:6f:bb:71:28 (capab=0xc31 status=0 aid=1) [ 2641.652403] wlan0: associated [ 2641.660231] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2641.845476] wlan0: disassociated from 00:02:6f:bb:71:28 (Reason: 4) [ 2641.873059] cfg80211: Calling CRDA to update world regulatory domain [ 2641.873149] wlan0: deauthenticating from 00:02:6f:bb:71:28 by local choice (reason=3) [ 2643.072030] wlan0: authenticate with 00:02:6f:bb:71:28 (try 1) [ 2643.083744] wlan0: authenticated [ 2643.102534] wlan0: associate with 00:02:6f:bb:71:28 (try 1) [ 2643.108622] wlan0: RX ReassocResp from 00:02:6f:bb:71:28 (capab=0xc31 status=0 aid=2) [ 2643.108630] wlan0: associated [ 3000.679871] usb 6-1.2: new high-speed USB device number 3 using xhci_hcd [ 3000.694603] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep [ 3000.695021] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep [ 3000.695422] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep [ 3000.695741] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep [ 3000.695980] usb 6-1.2: ep 0x83 - rounding interval to 32768 microframes, ep desc says 0 microframes [ 3000.695998] usb 6-1.2: ep 0x4 - rounding interval to 32768 microframes, ep desc says 0 microframes [ 3000.696008] usb 6-1.2: ep 0x6 - rounding interval to 32768 microframes, ep desc says 0 microframes [ 3000.696019] usb 6-1.2: ep 0xd - rounding interval to 32768 microframes, ep desc says 0 microframes [ 3000.737521] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 3000.740012] r8712u: DriverVersion: v7_0.20100831 [ 3000.740056] r8712u: register rtl8712_netdev_ops to netdev_ops [ 3000.740064] r8712u: USB_SPEED_HIGH with 4 endpoints [ 3000.740644] r8712u: Boot from EFUSE: Autoload OK [ 3001.161568] r8712u: CustomerID = 0x0000 [ 3001.161575] r8712u: MAC Address from efuse = 00:02:6f:91:f2:5e [ 3001.161580] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 3001.161805] usbcore: registered new interface driver r8712u [ 3001.893443] r8712u: 1 RCR=0x153f00e [ 3001.893975] r8712u: 2 RCR=0x553f00e [ 3002.001154] ADDRCONF(NETDEV_UP): wlan1: link is not ready root ~ #

haye86 commented 12 years ago

with the beta im running now the dongle is working! thanks for the help!!! Super!! thats why i love openelec!

sraue commented 12 years ago

thanks to you too :-)