Closed ashaheen closed 12 years ago
can you please tell us which remote you are using? paste also the output from lsmod
and cat /proc/bus/input/devices
here
lsmod
Module Size Used by bluetooth 126802 4 fglrx 2699869 64 snd_hda_codec_hdmi 21080 1 brcmsmac 503247 0 snd_hda_codec_realtek 145995 1 snd_hda_intel 19675 2 snd_hda_codec 64914 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi snd_hwdep 4342 1 snd_hda_codec snd_pcm 51921 4 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi snd_timer 14648 2 snd_pcm snd 36707 9 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi brcmutil 2671 1 brcmsmac k10temp 2019 0 crc8 748 1 brcmsmac snd_page_alloc 5493 2 snd_pcm,snd_hda_intel cordic 757 1 brcmsmac cat /proc/bus/input/devices
I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=PNP0C0C/button/input0 S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 U: Uniq= H: Handlers=kbd event0 B: PROP=0 B: EV=3 B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000 N: Name="Power Button" P: Phys=LNXPWRBN/button/input0 S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 U: Uniq= H: Handlers=kbd event1 B: PROP=0 B: EV=3 B: KEY=100000 0 0 0
I: Bus=0003 Vendor=0471 Product=0613 Version=0100 N: Name="PHILIPS MCE USB IR Receiver- Spinel plus" P: Phys=usb-0000:00:13.0-1/input0 S: Sysfs=/devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input2 U: Uniq= H: Handlers=kbd event2 B: PROP=0 B: EV=120013 B: KEY=c0000 400 0 0 0 0 58000 8001e8 4000c004 e0beffdf 1cfffff ffffffff fffffffe B: MSC=10 B: LED=1f
I: Bus=0003 Vendor=046d Product=c52a Version=0111 N: Name="Logitech 2.4GHz Cordless Desktop" P: Phys=usb-0000:00:13.0-3/input0 S: Sysfs=/devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.0/input/input3 U: Uniq= H: Handlers=kbd event3 B: PROP=0 B: EV=120013 B: KEY=10000 7 ff800000 7ff febeffdf ffefffff ffffffff fffffffe B: MSC=10 B: LED=ff1f
I: Bus=0003 Vendor=046d Product=c52a Version=0111 N: Name="Logitech 2.4GHz Cordless Desktop" P: Phys=usb-0000:00:13.0-3/input1 S: Sysfs=/devices/pci0000:00/0000:00:13.0/usb5/5-3/5-3:1.1/input/input4 U: Uniq= H: Handlers=kbd mouse0 event4 B: PROP=0 B: EV=2001f B: KEY=4837fff 72ff32d bf544446 0 0 ff0001 20c10 b17c000 267bfa d941dfed 9e1680 4400 0 10000002 B: REL=1c3 B: ABS=1 0 B: MSC=10 B: LED=ff00
I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HDA ATI SB Headphone" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:14.2/sound/card0/input5 U: Uniq= H: Handlers=event5 B: PROP=0 B: EV=21 B: SW=4
I: Bus=0000 Vendor=0000 Product=0000 Version=0000 N: Name="HD-Audio Generic HDMI/DP,pcm=3" P: Phys=ALSA S: Sysfs=/devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input6 U: Uniq= H: Handlers=event6 B: PROP=0 B: EV=21 B: SW=100
ok, makes sense... full support for such remotes was added recently... and because some remotes sends KEY_OK and some KEY_ENTER both buttons does the same stuff, on openelec switching the resolutions and KEY_INFO give some info stuff.
on openelec you can switch languages and subtitles with "#" and "*" do you have this keys? you can find a image on google for your remote?
yes and it is working but my issue with subtitle plugins which is download subtitle automatically and how i can select any one of them also if your move has multiple language sound how you can switch
my old Lircmap.xml file
my new Lirc.xml file in new beta3
i would live to go back to stable vision but neither you tube or weather is working
we must find a button (maybe a free one) for this, we cant change much with the configs, because there are different models out with different button layouts which uses all the same driver/config and all must have the basic functions
going back dont fixes any issues, thats never a solution
ok, have the same remote here, you can connect a keyboard and tell me if you mean the menu you get with pressing "m" on the keyboard?
yes this is what i mean exactly
this should be actually on the green windows button
no i try this but not working on remote
not only this not working even home button and clear button
can you check with irw
per ssh what you get for output if you press the green windows button? (and paste the output here)?
nothin
nothing
ok, then...
killall eventlircd
evtest
sorry reboot between installing the addon and trying the commands
root ~ # run killall eventlircd -sh: run: not found root ~ # killall eventlircd root ~ # evtest -sh: evtest: not found root ~ #
root ~ # run killall eventlircd
only:
killall eventlircd
and:
evtest
but reboot before
Available devices: /dev/input/event0: Power Button /dev/input/event1: Power Button /dev/input/event2: PHILIPS MCE USB IR Receiver- Spinel plus /dev/input/event3: Logitech 2.4GHz Cordless Desktop /dev/input/event4: Logitech 2.4GHz Cordless Desktop /dev/input/event5: HDA ATI SB Headphone /dev/input/event6: HD-Audio Generic HDMI/DP,pcm=3 Select the device event number [0-6]:
i select two and for green button nothing also
now press "2" (for /dev/input/event2: PHILIPS MCE USB IR Receiver- Spinel plus) and press the not working buttons (the green Windows button, and other buttons which dont work)
all of them not giving any response
now enter button it give like M in key board but home button and cloers (red;green;yallow ;blue )not working and the windows green button also not working
do you have any chat software or msn we can chat fast
with this also as summary clear button and enter button is working before not
ok...:
mount -t debugfs none /sys/kernel/debug
then:
ls /sys/kernel/debug/hid/
and paste the dirs here so i can give you the right commands
you can join our webchat from our site
0003:046D:C52A.0002 0003:046D:C52A.0003 0003:0471:0613.0001
please come to our IRC chat, i think we must add some more buttons
Can we contneu today
-----Original Message----- From: Stephan Raue [mailto:reply@reply.github.com] Sent: Saturday, February 25, 2012 9:27 PM To: ashaheen Subject: Re: [OpenELEC.tv] osd (#231)
now press "2" (for /dev/input/event2: PHILIPS MCE USB IR Receiver- Spinel plus) and press the not working buttons (the green Windows button, and other buttons which dont work)
Reply to this email directly or view it on GitHub: https://github.com/OpenELEC/OpenELEC.tv/issues/231#issuecomment-4174868
can you test r9900 from here: http://sources.openelec.tv/tmp/image/openelec-eden/ ?
I have to use update only or fresh installation I did not recommend fresh installation because I will lose sound configuration
-----Original Message----- From: Stephan Raue [mailto:reply@reply.github.com] Sent: Sunday, February 26, 2012 8:29 PM To: ashaheen Subject: Re: [OpenELEC.tv] osd (#231)
can you test r9900 from here: http://sources.openelec.tv/tmp/image/openelec-eden/ ?
Reply to this email directly or view it on GitHub: https://github.com/OpenELEC/OpenELEC.tv/issues/231#issuecomment-4182784
update is enough
can you try r9902 from http://sources.openelec.tv/tmp/image/openelec-eden/test/ again? (with update)
Green button working great Home button not working but red button is doing same home button All color button working Over all it is excellent But with this new installation I forget how I fix my you tube subscription before
-----Original Message----- From: Stephan Raue [mailto:reply@reply.github.com] Sent: Sunday, February 26, 2012 11:09 PM To: ashaheen Subject: Re: [OpenELEC.tv] osd (#231)
can you try r9902 from http://sources.openelec.tv/tmp/image/openelec-eden/test/ again? (with update)
Reply to this email directly or view it on GitHub: https://github.com/OpenELEC/OpenELEC.tv/issues/231#issuecomment-4184018
This is it slove youtube issue http://forum.xbmc.org/showthread.php?t=122245
-----Original Message----- From: Stephan Raue [mailto:reply@reply.github.com] Sent: Sunday, February 26, 2012 11:09 PM To: ashaheen Subject: Re: [OpenELEC.tv] osd (#231)
can you try r9902 from http://sources.openelec.tv/tmp/image/openelec-eden/test/ again? (with update)
Reply to this email directly or view it on GitHub: https://github.com/OpenELEC/OpenELEC.tv/issues/231#issuecomment-4184018
Hi stephan I have new issue to day When I play migority of my moves it play sound only and blank screen Kindly help
-----Original Message----- From: Stephan Raue [mailto:reply@reply.github.com] Sent: Sunday, February 26, 2012 11:09 PM To: ashaheen Subject: Re: [OpenELEC.tv] osd (#231)
can you try r9902 from http://sources.openelec.tv/tmp/image/openelec-eden/test/ again? (with update)
Reply to this email directly or view it on GitHub: https://github.com/OpenELEC/OpenELEC.tv/issues/231#issuecomment-4184018
during watching movies when you press I or ok button you will get OSD which include change subtitle or sound language and many option also for subtitle plugins. but in new beta3 ok button i lead to something related to screen size and i button it give OSD which contain only video duration par