search

OpenELEC / OpenELEC.tv

OpenELEC - The living room PC for everyone
http://openelec.tv
1.6k stars 887 forks source link

xmbc freeze when trying to play a file #319

Closed ghost closed 12 years ago

ghost commented 12 years ago

i'm using generic 1.0.2, with an asus p5v800-mx motherboard, a nvidia geforce 6200 graphic card, and a RaLink Wireless usb dongle. When i try to play a file, video or audio, local or networked, the gui freeze. The ssh seems unaffected because i can still login and reboot or poweroff remotely.

root ~ # cat /var/log/Xorg.0.0.log [296401.790] X.Org X Server 1.10.4 Release Date: 2011-08-19 [296401.790] X Protocol Version 11, Revision 0 [296401.790] Build Operating System: Linux 2.6.32-31-generic-pae i686 OpenELEC.tv [296401.790] Current Operating System: Linux openelec 3.1.0 #1 SMP PREEMPT Tue Oct 25 03:30:20 CEST 2011 i686 [296401.790] Kernel command line: fastboot root=/dev/ram0 rdinit=/init threadirqs boot=LABEL=System disk=LABEL=Storage quiet vga=792 BOOTIMAGE=/KERNEL [296401.790] Build Date: 25 October 2011 04:26:03AM [296401.790]
[296401.790] Current version of pixman: 0.22.2 [296401.790] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [296401.790] Markers: (--) probed, (*) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. 296401.791 Log file: "/var/log/Xorg.0.0.log", Time: Wed Mar 14 14:44:23 2012 296401.919 Using config file: "/storage/.config/xorg.conf" 296401.919 Using system config directory "/usr/share/X11/xorg.conf.d" 296401.964 No Layout section. Using the first Screen section. 296401.964 |-->Screen "screen" (0) 296401.964 | |-->Monitor "" 296401.964 | |-->Device "nvidia" 296401.964 No monitor specified for screen "screen". Using a default monitor configuration. 296401.964 Automatically adding devices 296401.964 Automatically enabling devices 296401.996 FontPath set to: /usr/share/fonts/misc, built-ins 296401.996 ModulePath set to "/usr/lib/xorg/modules" 296401.996 Extension "Composite" is disabled 296401.996 The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. 296401.996 Loader magic: 0x8245240 296401.996 Module ABI versions: [296401.996] X.Org ANSI C Emulation: 0.4 [296401.996] X.Org Video Driver: 10.0 [296401.996] X.Org XInput driver : 12.2 [296401.996] X.Org Server Extension : 5.0 296401.997 PCI:_(0:1:0:0) 10de:0221:19f1:0000 rev 161, Mem @ 0xfd000000/16777216, 0xa0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072 296401.997 LoadModule: "extmod" 296402.011 Loading /usr/lib/xorg/modules/extensions/libextmod.so 296402.028 Module extmod: vendor="X.Org Foundation" [296402.028] compiled for 1.10.4, module version = 1.0.0 [296402.028] Module class: X.Org Server Extension [296402.028] ABI class: X.Org Server Extension, version 5.0 296402.028 Loading extension XFree86-VidModeExtension 296402.028 Loading extension XFree86-DGA 296402.028 Loading extension DPMS 296402.028 Loading extension XVideo 296402.028 Loading extension XVideo-MotionCompensation 296402.028 LoadModule: "dbe" 296402.028 Loading /usr/lib/xorg/modules/extensions/libdbe.so 296402.041 Module dbe: vendor="X.Org Foundation" [296402.041] compiled for 1.10.4, module version = 1.0.0 [296402.041] Module class: X.Org Server Extension [296402.041] ABI class: X.Org Server Extension, version 5.0 296402.041 Loading extension DOUBLE-BUFFER 296402.041 LoadModule: "glx" 296402.041 Loading /usr/lib/xorg/modules/extensions/libglx.so 296403.337 Module glx: vendor="NVIDIA Corporation" [296403.337] compiled for 4.0.2, module version = 1.0.0 [296403.337] Module class: X.Org Server Extension 296403.337 NVIDIA GLX Module 290.03 Mon Oct 17 12:54:02 PDT 2011 296403.337 Loading extension GLX 296403.337 LoadModule: "record" 296403.337 Loading /usr/lib/xorg/modules/extensions/librecord.so 296403.370 Module record: vendor="X.Org Foundation" [296403.370] compiled for 1.10.4, module version = 1.13.0 [296403.370] Module class: X.Org Server Extension [296403.372] ABI class: X.Org Server Extension, version 5.0 296403.372 Loading extension RECORD 296403.372 LoadModule: "dri" 296403.372 Loading /usr/lib/xorg/modules/extensions/libdri.so 296403.374 Module dri: vendor="X.Org Foundation" [296403.374] compiled for 1.10.4, module version = 1.0.0 [296403.374] ABI class: X.Org Server Extension, version 5.0 296403.374 Loading extension XFree86-DRI 296403.374 LoadModule: "dri2" 296403.374 Loading /usr/lib/xorg/modules/extensions/libdri2.so 296403.374 Module dri2: vendor="X.Org Foundation" [296403.374] compiled for 1.10.4, module version = 1.2.0 [296403.374] ABI class: X.Org Server Extension, version 5.0 296403.374 Loading extension DRI2 296403.374 LoadModule: "nvidia" 296403.374 Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so 296403.477 Module nvidia: vendor="NVIDIA Corporation" [296403.477] compiled for 4.0.2, module version = 1.0.0 [296403.477] Module class: X.Org Video Driver 296403.736 NVIDIA dlloader X Driver 290.03 Mon Oct 17 12:33:06 PDT 2011 296403.739 NVIDIA Unified Driver for all Supported NVIDIA GPUs 296403.739 using VT number 1

296403.739 xf86OpenConsole: setsid failed: Operation not permitted 296403.743 Loading sub module "fb" 296403.743 LoadModule: "fb" 296403.743 Loading /usr/lib/xorg/modules/libfb.so 296403.761 Module fb: vendor="X.Org Foundation" [296403.761] compiled for 1.10.4, module version = 1.0.0 [296403.761] ABI class: X.Org ANSI C Emulation, version 0.4 296403.761 Loading sub module "wfb" 296403.761 LoadModule: "wfb" 296403.762 Loading /usr/lib/xorg/modules/libwfb.so 296403.796 Module wfb: vendor="X.Org Foundation" [296403.796] compiled for 1.10.4, module version = 1.0.0 [296403.796] ABI class: X.Org ANSI C Emulation, version 0.4 296403.796 Loading sub module "ramdac" 296403.796 LoadModule: "ramdac" 296403.796 Module "ramdac" already built-in 296403.803 Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so 296403.803 Loading /usr/lib/xorg/modules/libwfb.so 296403.805 Loading /usr/lib/xorg/modules/libfb.so 296403.883 NVIDIA(0): Depth 24, (--) framebuffer bpp 32 296403.883 NVIDIA(0): RGB weight 888 296403.883 NVIDIA(0): Default visual is TrueColor 296403.883 NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) 296403.883 NVIDIA(0): Option "NoFlip" "false" 296403.883 NVIDIA(0): Option "NoLogo" "true" 296403.883 NVIDIA(0): Option "HWcursor" "false" 296403.883 NVIDIA(0): Option "ColorRange" "Full" 296403.883 NVIDIA(0): Option "ModeValidation" "NoVesaModes, NoXServerModes" 296403.883 NVIDIA(0): Option "FlatPanelProperties" "Scaling = Native" 296403.883 NVIDIA(0): Option "DynamicTwinView" "False" 296403.883 NVIDIA(0): Option "ConnectToAcpid" "0" 296403.883 NVIDIA(0): Enabling 2D acceleration 296405.416 NVIDIA(GPU-0): Display (BenQ EW2420 (DFP-0)) does not support NVIDIA 3D 296405.416 NVIDIA(GPU-0): Vision stereo. 296405.417 NVIDIA(0): NVIDIA GPU GeForce 6200 (NV44) at PCI:1:0:0 (GPU-0) 296405.417 NVIDIA(0): Memory: 262144 kBytes 296405.417 NVIDIA(0): VideoBIOS: 05.44.a2.10.65 296405.417 NVIDIA(0): Detected AGP rate: 8X 296405.417 NVIDIA(0): Interlaced video modes are supported on this GPU 296405.417 NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0 296405.417 NVIDIA(0): BenQ EW2420 (DFP-0) 296405.417 NVIDIA(0): BenQ EW2420 (DFP-0): 155.0 MHz maximum pixel clock 296405.417 NVIDIA(0): BenQ EW2420 (DFP-0): Internal Single Link TMDS 296405.417 NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been 296405.417 NVIDIA(0): enabled on all display devices. 296405.417 NVIDIA(0): Mode Validation Overrides for BenQ EW2420 (DFP-0): 296405.417 NVIDIA(0): NoVesaModes 296405.417 NVIDIA(0): NoXServerModes 296405.417 NVIDIA(0): The EDID for BenQ EW2420 (DFP-0) contradicts itself: mode 296405.417 NVIDIA(0): "720x480" is specified in the EDID; however, the EDID's 296405.417 NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude 296405.417 NVIDIA(0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check 296405.417 NVIDIA(0): for mode "720x480". 296405.417 NVIDIA(0): The EDID for BenQ EW2420 (DFP-0) contradicts itself: mode 296405.417 NVIDIA(0): "720x480" is specified in the EDID; however, the EDID's 296405.417 NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude 296405.417 NVIDIA(0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check 296405.417 NVIDIA(0): for mode "720x480". 296405.417 NVIDIA(0): The EDID for BenQ EW2420 (DFP-0) contradicts itself: mode 296405.417 NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's 296405.417 NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude 296405.417 NVIDIA(0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check 296405.417 NVIDIA(0): for mode "720x576". 296405.418 NVIDIA(0): The EDID for BenQ EW2420 (DFP-0) contradicts itself: mode 296405.418 NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's 296405.418 NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude 296405.418 NVIDIA(0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check 296405.418 NVIDIA(0): for mode "720x576". 296405.418 NVIDIA(0): The EDID for BenQ EW2420 (DFP-0) contradicts itself: mode 296405.418 NVIDIA(0): "720x480" is specified in the EDID; however, the EDID's 296405.418 NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude 296405.418 NVIDIA(0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check 296405.418 NVIDIA(0): for mode "720x480". 296405.418 NVIDIA(0): The EDID for BenQ EW2420 (DFP-0) contradicts itself: mode 296405.418 NVIDIA(0): "720x480" is specified in the EDID; however, the EDID's 296405.418 NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude 296405.418 NVIDIA(0): this mode's HorizSync (15.7 kHz); ignoring HorizSync check 296405.418 NVIDIA(0): for mode "720x480". 296405.418 NVIDIA(0): The EDID for BenQ EW2420 (DFP-0) contradicts itself: mode 296405.418 NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's 296405.418 NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude 296405.418 NVIDIA(0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check 296405.418 NVIDIA(0): for mode "720x576". 296405.418 NVIDIA(0): The EDID for BenQ EW2420 (DFP-0) contradicts itself: mode 296405.418 NVIDIA(0): "720x576" is specified in the EDID; however, the EDID's 296405.418 NVIDIA(0): valid HorizSync range (24.000-83.000 kHz) would exclude 296405.418 NVIDIA(0): this mode's HorizSync (15.6 kHz); ignoring HorizSync check 296405.418 NVIDIA(0): for mode "720x576". 296405.418 NVIDIA(0): Assigned Display Device: DFP-0 296405.418 NVIDIA(0): 296405.418 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" 296405.418 NVIDIA(0): will be used as the requested mode. 296405.418 NVIDIA(0): 296405.418 NVIDIA(0): Validated modes: 296405.418 NVIDIA(0): "nvidia-auto-select" 296405.418 NVIDIA(0): Virtual screen size determined to be 1920 x 1080 296405.419 NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config 296405.419 NVIDIA(0): option 296405.419 Depth 24 pixmap format is 32 bpp 296405.429 NVIDIA(0): Setting mode "nvidia-auto-select" 296405.556 Loading extension NV-GLX 296405.633 NVIDIA(0): Disabling shared memory pixmaps 296405.633 NVIDIA(0): Backing store disabled 296405.633 NVIDIA(0): Silken mouse enabled 296405.634 NVIDIA(0): DPMS enabled 296405.634 Loading extension NV-CONTROL 296405.634 NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "CRT", but no 296405.634 NVIDIA(0): such display device could be found, or all display devices 296405.634 NVIDIA(0): by that name are currently unavailable. 296405.634 NVIDIA(0): Option "TwinViewXineramaInfoOrder" requested "TV", but no such 296405.634 NVIDIA(0): display device could be found, or all display devices by 296405.634 NVIDIA(0): that name are currently unavailable. 296405.634 Loading extension XINERAMA 296405.634 Loading sub module "dri2" 296405.634 LoadModule: "dri2" 296405.634 Loading /usr/lib/xorg/modules/extensions/libdri2.so 296405.634 Module dri2: vendor="X.Org Foundation" [296405.634] compiled for 1.10.4, module version = 1.2.0 [296405.634] ABI class: X.Org Server Extension, version 5.0 296405.635 NVIDIA(0): [DRI2] Setup complete 296405.635 RandR enabled 296405.635 Initializing built-in extension Generic Event Extension 296405.635 Initializing built-in extension SHAPE 296405.635 Initializing built-in extension MIT-SHM 296405.635 Initializing built-in extension XInputExtension 296405.635 Initializing built-in extension XTEST 296405.635 Initializing built-in extension BIG-REQUESTS 296405.635 Initializing built-in extension SYNC 296405.635 Initializing built-in extension XKEYBOARD 296405.635 Initializing built-in extension XC-MISC 296405.635 Initializing built-in extension XINERAMA 296405.635 Initializing built-in extension XFIXES 296405.635 Initializing built-in extension RENDER 296405.635 Initializing built-in extension RANDR 296405.635 Initializing built-in extension COMPOSITE 296405.635 Initializing built-in extension DAMAGE 296405.638 Initializing extension GLX 296405.685 XKB: generating xkmfile /var/cache/xkb/server-80882C0938CB2308C0992C091400000014540B08.xkm 296405.803 config/udev: Adding input device Power Button (/dev/input/event2) 296405.803 Power Button: Applying InputClass "evdev keyboard catchall" 296405.803 LoadModule: "evdev" 296405.803 Loading /usr/lib/xorg/modules/input/evdev_drv.so 296405.804 Module evdev: vendor="X.Org Foundation" [296405.804] compiled for 1.10.4, module version = 2.6.0 [296405.804] Module class: X.Org XInput Driver [296405.804] ABI class: X.Org XInput driver, version 12.2 296405.804 Using input driver 'evdev' for 'Power Button' 296405.804 Loading /usr/lib/xorg/modules/input/evdev_drv.so 296405.804 Power Button: always reports core events 296405.804 Power Button: Device: "/dev/input/event2" 296405.804 Power Button: Found keys 296405.804 Power Button: Configuring as keyboard 296405.804 Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2" 296405.804 XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) 296405.804 Option "xkb_rules" "evdev" 296405.804 Option "xkb_model" "evdev" 296405.804 Option "xkb_layout" "us" 296405.808 XKB: generating xkmfile /var/cache/xkb/server-D0CE2C0938CB230820072D091400000014540B08.xkm 296405.840 config/udev: Adding input device Power Button (/dev/input/event1) 296405.840 Power Button: Applying InputClass "evdev keyboard catchall" 296405.840 Using input driver 'evdev' for 'Power Button' 296405.841 Loading /usr/lib/xorg/modules/input/evdev_drv.so 296405.841 Power Button: always reports core events 296405.841 Power Button: Device: "/dev/input/event1" 296405.841 Power Button: Found keys 296405.841 Power Button: Configuring as keyboard 296405.841 Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1" 296405.841 XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) 296405.841 Option "xkb_rules" "evdev" 296405.841 Option "xkb_model" "evdev" 296405.841 Option "xkb_layout" "us" 296405.841 config/udev: Adding input device Sleep Button (/dev/input/event0) 296405.841 Sleep Button: Applying InputClass "evdev keyboard catchall" 296405.841 Using input driver 'evdev' for 'Sleep Button' 296405.841 Loading /usr/lib/xorg/modules/input/evdev_drv.so 296405.841 Sleep Button: always reports core events 296405.841 Sleep Button: Device: "/dev/input/event0" 296405.841 Sleep Button: Found keys 296405.841 Sleep Button: Configuring as keyboard 296405.841 Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0/event0" 296405.841 XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD) 296405.841 Option "xkb_rules" "evdev" 296405.841 Option "xkb_model" "evdev" 296405.841 Option "xkb_layout" "us" 296405.850 config/udev: Adding input device HP HP Wireless 3 Button Mouse (/dev/input/event4) 296405.850 HP HP Wireless 3 Button Mouse: Applying InputClass "evdev pointer catchall" 296405.850 Using input driver 'evdev' for 'HP HP Wireless 3 Button Mouse' 296405.850 Loading /usr/lib/xorg/modules/input/evdev_drv.so 296405.850 HP HP Wireless 3 Button Mouse: always reports core events 296405.850 HP HP Wireless 3 Button Mouse: Device: "/dev/input/event4" 296405.850 HP HP Wireless 3 Button Mouse: Found 3 mouse buttons 296405.850 HP HP Wireless 3 Button Mouse: Found scroll wheel(s) 296405.850 HP HP Wireless 3 Button Mouse: Found relative axes 296405.850 HP HP Wireless 3 Button Mouse: Found x and y relative axes 296405.850 HP HP Wireless 3 Button Mouse: Found absolute axes 296405.850 HP HP Wireless 3 Button Mouse: Configuring as mouse 296405.850 HP HP Wireless 3 Button Mouse: Adding scrollwheel support 296405.850 HP HP Wireless 3 Button Mouse: YAxisMapping: buttons 4 and 5 296405.850 HP HP Wireless 3 Button Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 296405.850 Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input4/event4" 296405.850 XINPUT: Adding extended input device "HP HP Wireless 3 Button Mouse" (type: MOUSE) 296405.850 HP HP Wireless 3 Button Mouse: initialized for relative axes. 296405.850 HP HP Wireless 3 Button Mouse: ignoring absolute axes. 296405.850 HP HP Wireless 3 Button Mouse: (accel) keeping acceleration scheme 1 296405.850 HP HP Wireless 3 Button Mouse: (accel) acceleration profile 0 296405.850 HP HP Wireless 3 Button Mouse: (accel) acceleration factor: 2.000 296405.850 HP HP Wireless 3 Button Mouse: (accel) acceleration threshold: 4 296405.851 config/udev: Adding input device HP HP Wireless 3 Button Mouse (/dev/input/mouse0) 296405.851 No input driver/identifier specified (ignoring) 296405.857 config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) 296405.857 AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" 296405.857 Using input driver 'evdev' for 'AT Translated Set 2 keyboard' 296405.857 Loading /usr/lib/xorg/modules/input/evdev_drv.so 296405.857 AT Translated Set 2 keyboard: always reports core events 296405.857 AT Translated Set 2 keyboard: Device: "/dev/input/event3" 296405.857 AT Translated Set 2 keyboard: Found keys 296405.857 AT Translated Set 2 keyboard: Configuring as keyboard 296405.857 Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3" 296405.857 XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD) 296405.857 Option "xkb_rules" "evdev" 296405.857 Option "xkb_model" "evdev" 296405.857 Option "xkb_layout" "us" 296405.903 XKB: generating xkmfile /var/cache/xkb/server-0000000000000000000000000000000000000000.xkm 296406.889 XKB: generating xkmfile /var/cache/xkb/server-60BB90BF23DA42B7F43F51B7A05351B740053F09.xkm

root ~ # cat /var/log/messages Mar 14 14:44:21 openelec syslog.info syslogd started: BusyBox v1.19.2 Mar 14 14:44:21 openelec user.notice kernel: klogd started: BusyBox v1.19.2 (2011-10-25 03:30:53 CEST) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Initializing cgroup subsys cpuset Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Initializing cgroup subsys cpu Mar 14 14:44:21 openelec user.notice kernel: [ 0.000000] Linux version 3.1.0 (jetstream@1801-lin007) (gcc version 4.5.3 (GCC) ) #1 SMP PREEMPT Tue Oct 25 03:30:20 CEST 2011 Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] BIOS-provided physical RAM map: Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) Mar 14 14:44:21 openelec user.notice kernel: [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] DMI 2.3 present. Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] DMI: System manufacturer System Product Name/P5V800-MX, BIOS 0802 07/12/2006 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] last_pfn = 0x7ffc0 max_arch_pfn = 0x100000 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] MTRR default type: uncachable Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] MTRR fixed ranges enabled: Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 00000-9FFFF write-back Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] A0000-DFFFF uncachable Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] E0000-EFFFF write-through Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] F0000-FFFFF write-protect Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] MTRR variable ranges enabled: Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 0 base 000000000 mask F80000000 write-back Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 1 disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 2 disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 3 disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 4 disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 5 disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 6 disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 7 disabled Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] found SMP MP-table at [c00ff780] ff780 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] initial memory mapped : 0 - 02000000 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 0000000000 - 0000400000 page 4k Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 0000400000 - 0037400000 page 2M Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] 0037400000 - 00377fe000 page 4k Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1ffb000-2000000 Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] ACPI: RSDP 000fa8d0 00014 (v00 ACPIAM) Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] ACPI: RSDT 7ffc0000 00030 (v01 A M I OEMRSDT 07000612 MSFT 00000097) Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] ACPI: FACP 7ffc0200 00084 (v02 A M I OEMFACP 07000612 MSFT 00000097) Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] ACPI: DSDT 7ffc0430 04B5D (v01 A0398 A0398001 00000001 INTL 02002026) Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] ACPI: FACS 7ffce000 00040 Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] ACPI: MCFG 7ffc03f0 0003C (v01 A M I OEMMCFG 07000612 MSFT 00000097) Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] ACPI: OEMB 7ffce040 00046 (v01 A M I AMI_OEM 07000612 MSFT 00000097) Mar 14 14:44:21 openelec user.notice kernel: [ 0.000000] 1159MB HIGHMEM available. Mar 14 14:44:21 openelec user.notice kernel: [ 0.000000] 887MB LOWMEM available. Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] mapped low ram: 0 - 377fe000 Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] low ram: 0 - 377fe000 Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] Zone PFN ranges: Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] Normal 0x00001000 -> 0x000377fe Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] HighMem 0x000377fe -> 0x0007ffc0 Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] Movable zone start PFN for each node Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] early_node_map[2] active PFN ranges Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] 0: 0x00000100 -> 0x0007ffc0 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] On node 0 totalpages: 524111 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c182e180, node_mem_map f67fd200 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] DMA zone: 32 pages used for memmap Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] DMA zone: 0 pages reserved Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] Normal zone: 1744 pages used for memmap Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] HighMem zone: 2320 pages used for memmap Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] HighMem zone: 294578 pages, LIFO batch:31 Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Using APIC driver default Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x808 Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] ACPI: No APIC-table, disabling MPS Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Found and enabled local APIC! Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] nr_irqs_gsi: 16 Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] PERCPU: Embedded 11 pages/cpu @f6000000 s22976 r0 d22080 u4194304 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] pcpu-alloc: s22976 r0 d22080 u4194304 alloc=1*4194304 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520015 Mar 14 14:44:21 openelec user.notice kernel: [ 0.000000] Kernel command line: fastboot root=/dev/ram0 rdinit=/init threadirqs boot=LABEL=System disk=LABEL=Storage quiet vga=792 BOOT_IMAGE=/KERNEL Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Initializing CPU#0 Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffc0) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Memory: 2067520k/2096896k available (6258k kernel code, 28924k reserved, 2150k data, 2916k init, 1187592k highmem) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] virtual kernel memory layout: Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] .init : 0xc1837000 - 0xc1b10000 (2916 kB) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] .data : 0xc161c9e8 - 0xc18362c0 (2150 kB) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] .text : 0xc1000000 - 0xc161c9e8 (6258 kB) Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Preemptible hierarchical RCU implementation. Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] NR_IRQS:512 Mar 14 14:44:21 openelec user.debug kernel: [ 0.000000] CPU 0 irqstacks, hard=f5c0c000 soft=f5c0e000 Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] Console: colour dummy device 80x25 Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] console [tty0] enabled Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] Fast TSC calibration failed Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] TSC: Unable to calibrate against PIT Mar 14 14:44:21 openelec user.info kernel: [ 0.000000] TSC: using PMTIMER reference calibration Mar 14 14:44:21 openelec user.warn kernel: [ 0.000000] Detected 2999.843 MHz processor. Mar 14 14:44:21 openelec user.info kernel: [ 0.013334] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.67 BogoMIPS (lpj=9999476) Mar 14 14:44:21 openelec user.info kernel: [ 0.013341] pid_max: default: 32768 minimum: 301 Mar 14 14:44:21 openelec user.info kernel: [ 0.013404] Mount-cache hash table entries: 512 Mar 14 14:44:21 openelec user.info kernel: [ 0.013649] Initializing cgroup subsys cpuacct Mar 14 14:44:21 openelec user.info kernel: [ 0.013662] Initializing cgroup subsys freezer Mar 14 14:44:21 openelec user.info kernel: [ 0.013695] CPU: Physical Processor ID: 0 Mar 14 14:44:21 openelec user.info kernel: [ 0.013697] CPU: Processor Core ID: 0 Mar 14 14:44:21 openelec user.info kernel: [ 0.013700] using mwait in idle threads. Mar 14 14:44:21 openelec user.info kernel: [ 0.013906] SMP alternatives: switching to UP code Mar 14 14:44:21 openelec user.info kernel: [ 0.024003] Freeing SMP alternatives: 24k freed Mar 14 14:44:21 openelec user.info kernel: [ 0.024011] ACPI: Core revision 20110623 Mar 14 14:44:21 openelec user.warn kernel: [ 0.027086] ACPI: setting ELCR to 0200 (from 0c28) Mar 14 14:44:21 openelec user.warn kernel: [ 0.030063] weird, boot CPU (#0) not listed by the BIOS. Mar 14 14:44:21 openelec user.notice kernel: [ 0.030066] SMP motherboard not detected. Mar 14 14:44:21 openelec user.info kernel: [ 0.030069] Enabling APIC mode: Flat. Using 0 I/O APICs Mar 14 14:44:21 openelec user.info kernel: [ 0.033331] SMP disabled Mar 14 14:44:21 openelec user.info kernel: [ 0.033331] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. Mar 14 14:44:21 openelec user.info kernel: [ 0.033331] ... version: 0 Mar 14 14:44:21 openelec user.info kernel: [ 0.033331] ... bit width: 40 Mar 14 14:44:21 openelec user.info kernel: [ 0.033331] ... generic registers: 18 Mar 14 14:44:21 openelec user.info kernel: [ 0.033331] ... value mask: 000000ffffffffff Mar 14 14:44:21 openelec user.info kernel: [ 0.033331] ... max period: 0000007fffffffff Mar 14 14:44:21 openelec user.info kernel: [ 0.033331] ... fixed-purpose events: 0 Mar 14 14:44:21 openelec user.info kernel: [ 0.033331] ... event mask: 000000000003ffff Mar 14 14:44:21 openelec user.info kernel: [ 0.050011] Brought up 1 CPUs Mar 14 14:44:21 openelec user.info kernel: [ 0.050015] Total of 1 processors activated (6002.67 BogoMIPS). Mar 14 14:44:21 openelec user.info kernel: [ 0.050205] devtmpfs: initialized Mar 14 14:44:21 openelec user.info kernel: [ 0.050574] NET: Registered protocol family 16 Mar 14 14:44:21 openelec user.info kernel: [ 0.050682] ACPI: bus type pci registered Mar 14 14:44:21 openelec user.info kernel: [ 0.050746] PCI: MMCONFIG for domain 0000 [bus 02-ff] at [mem 0xe0200000-0xefffffff](base 0xe0000000) Mar 14 14:44:21 openelec user.info kernel: [ 0.050751] PCI: MMCONFIG at [mem 0xe0200000-0xefffffff] reserved in E820 Mar 14 14:44:21 openelec user.info kernel: [ 0.050753] PCI: Using MMCONFIG for extended config space Mar 14 14:44:21 openelec user.info kernel: [ 0.050756] PCI: Using configuration type 1 for base access Mar 14 14:44:21 openelec user.info kernel: [ 0.052422] bio: create slab at 0 Mar 14 14:44:21 openelec user.info kernel: [ 0.052505] ACPI: Added _OSI(Module Device) Mar 14 14:44:21 openelec user.info kernel: [ 0.052508] ACPI: Added _OSI(Processor Device) Mar 14 14:44:21 openelec user.info kernel: [ 0.052511] ACPI: Added _OSI(3.0 _SCP Extensions) Mar 14 14:44:21 openelec user.info kernel: [ 0.052514] ACPI: Added _OSI(Processor Aggregator Device) Mar 14 14:44:21 openelec user.debug kernel: [ 0.053555] ACPI: EC: Look up EC in DSDT Mar 14 14:44:21 openelec user.warn kernel: [ 0.055451] ACPI: Executed 1 blocks of module-level executable AML code Mar 14 14:44:21 openelec user.info kernel: [ 0.058615] ACPI: Interpreter enabled Mar 14 14:44:21 openelec user.info kernel: [ 0.058628] ACPI: (supports S0 S1 S3 S5) Mar 14 14:44:21 openelec user.info kernel: [ 0.058650] ACPI: Using PIC for interrupt routing Mar 14 14:44:21 openelec user.info kernel: [ 0.068255] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug Mar 14 14:44:21 openelec user.info kernel: [ 0.068353] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-ff]) Mar 14 14:44:21 openelec user.debug kernel: [ 0.068531] pci_root PNP0A03:00: host bridge window io 0x0000-0x0cf7 Mar 14 14:44:21 openelec user.debug kernel: [ 0.068536] pci_root PNP0A03:00: host bridge window io 0x0d00-0xffff Mar 14 14:44:21 openelec user.debug kernel: [ 0.068539] pci_root PNP0A03:00: host bridge window mem 0x000a0000-0x000bffff Mar 14 14:44:21 openelec user.debug kernel: [ 0.068542] pci_root PNP0A03:00: host bridge window mem 0x000d0000-0x000dffff Mar 14 14:44:21 openelec user.debug kernel: [ 0.068546] pci_root PNP0A03:00: host bridge window mem 0x80000000-0xffffffff Mar 14 14:44:21 openelec user.debug kernel: [ 0.068567] pci 0000:00:00.0: [1106:0314] type 0 class 0x000600 Mar 14 14:44:21 openelec user.debug kernel: [ 0.068581] pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xdfffffff pref] Mar 14 14:44:21 openelec user.debug kernel: [ 0.068663] pci 0000:00:00.1: [1106:1314] type 0 class 0x000600 Mar 14 14:44:21 openelec user.debug kernel: [ 0.068722] pci 0000:00:00.2: [1106:2314] type 0 class 0x000600 Mar 14 14:44:21 openelec user.debug kernel: [ 0.068783] pci 0000:00:00.3: [1106:3208] type 0 class 0x000600 Mar 14 14:44:21 openelec user.debug kernel: [ 0.068841] pci 0000:00:00.4: [1106:4314] type 0 class 0x000600 Mar 14 14:44:21 openelec user.debug kernel: [ 0.068902] pci 0000:00:00.7: [1106:7314] type 0 class 0x000600 Mar 14 14:44:21 openelec user.debug kernel: [ 0.068963] pci 0000:00:01.0: [1106:b198] type 1 class 0x000604 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069015] pci 0000:00:01.0: supports D1 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069057] pci 0000:00:0f.0: [1106:3349] type 0 class 0x000101 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069082] pci 0000:00:0f.0: reg 10: [io 0xec00-0xec07] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069094] pci 0000:00:0f.0: reg 14: [io 0xe880-0xe883] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069105] pci 0000:00:0f.0: reg 18: [io 0xe800-0xe807] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069117] pci 0000:00:0f.0: reg 1c: [io 0xe480-0xe483] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069129] pci 0000:00:0f.0: reg 20: [io 0xe400-0xe40f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069141] pci 0000:00:0f.0: reg 24: [mem 0xfebffc00-0xfebfffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069180] pci 0000:00:0f.0: PME# supported from D3hot Mar 14 14:44:21 openelec user.debug kernel: [ 0.069186] pci 0000:00:0f.0: PME# disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.069209] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069265] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069332] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069386] pci 0000:00:10.0: reg 20: [io 0xe080-0xe09f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069425] pci 0000:00:10.0: supports D1 D2 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069428] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold Mar 14 14:44:21 openelec user.debug kernel: [ 0.069433] pci 0000:00:10.0: PME# disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.069452] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069506] pci 0000:00:10.1: reg 20: [io 0xe000-0xe01f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069545] pci 0000:00:10.1: supports D1 D2 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069548] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold Mar 14 14:44:21 openelec user.debug kernel: [ 0.069553] pci 0000:00:10.1: PME# disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.069575] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069629] pci 0000:00:10.2: reg 20: [io 0xdc00-0xdc1f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069668] pci 0000:00:10.2: supports D1 D2 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069670] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold Mar 14 14:44:21 openelec user.debug kernel: [ 0.069675] pci 0000:00:10.2: PME# disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.069695] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069748] pci 0000:00:10.3: reg 20: [io 0xd880-0xd89f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069787] pci 0000:00:10.3: supports D1 D2 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069790] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold Mar 14 14:44:21 openelec user.debug kernel: [ 0.069795] pci 0000:00:10.3: PME# disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.069816] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069839] pci 0000:00:10.4: reg 10: [mem 0xfebff800-0xfebff8ff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.069917] pci 0000:00:10.4: supports D1 D2 Mar 14 14:44:21 openelec user.debug kernel: [ 0.069919] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold Mar 14 14:44:21 openelec user.debug kernel: [ 0.069924] pci 0000:00:10.4: PME# disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.069950] pci 0000:00:11.0: [1106:3287] type 0 class 0x000601 Mar 14 14:44:21 openelec user.debug kernel: [ 0.070081] pci 0000:00:11.7: [1106:287e] type 0 class 0x000600 Mar 14 14:44:21 openelec user.debug kernel: [ 0.070150] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200 Mar 14 14:44:21 openelec user.debug kernel: [ 0.070171] pci 0000:00:12.0: reg 10: [io 0xd400-0xd4ff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.070183] pci 0000:00:12.0: reg 14: [mem 0xfebff400-0xfebff4ff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.070249] pci 0000:00:12.0: supports D1 D2 Mar 14 14:44:21 openelec user.debug kernel: [ 0.070252] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold Mar 14 14:44:21 openelec user.debug kernel: [ 0.070257] pci 0000:00:12.0: PME# disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.070272] pci 0000:00:13.0: [1106:287b] type 1 class 0x000604 Mar 14 14:44:21 openelec user.debug kernel: [ 0.070314] pci 0000:00:13.1: [1106:287a] type 1 class 0x000604 Mar 14 14:44:21 openelec user.debug kernel: [ 0.070416] pci 0000:01:00.0: [10de:0221] type 0 class 0x000300 Mar 14 14:44:21 openelec user.debug kernel: [ 0.070435] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.070446] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff pref] Mar 14 14:44:21 openelec user.debug kernel: [ 0.070456] pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfcffffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.070485] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] Mar 14 14:44:21 openelec user.info kernel: [ 0.070546] pci 0000:00:01.0: PCI bridge to [bus 01-01] Mar 14 14:44:21 openelec user.debug kernel: [ 0.070554] pci 0000:00:01.0: bridge window [mem 0xfa900000-0xfe9fffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.070559] pci 0000:00:01.0: bridge window [mem 0x9ff00000-0xbfefffff pref] Mar 14 14:44:21 openelec user.debug kernel: [ 0.070586] pci 0000:02:00.0: [1106:287c] type 1 class 0x000604 Mar 14 14:44:21 openelec user.debug kernel: [ 0.070646] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold Mar 14 14:44:21 openelec user.debug kernel: [ 0.070651] pci 0000:02:00.0: PME# disabled Mar 14 14:44:21 openelec user.debug kernel: [ 0.070677] pci 0000:02:00.1: [1106:287d] type 1 class 0x000604 Mar 14 14:44:21 openelec user.debug kernel: [ 0.070736] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold Mar 14 14:44:21 openelec user.debug kernel: [ 0.070740] pci 0000:02:00.1: PME# disabled Mar 14 14:44:21 openelec user.info kernel: [ 0.070762] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' Mar 14 14:44:21 openelec user.debug kernel: [ 0.070781] pci 0000:02:01.0: [1106:3288] type 0 class 0x000403 Mar 14 14:44:21 openelec user.debug kernel: [ 0.070795] pci 0000:02:01.0: reg 10: [mem 0xfeafc000-0xfeafffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.070869] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold Mar 14 14:44:21 openelec user.debug kernel: [ 0.070874] pci 0000:02:01.0: PME# disabled Mar 14 14:44:21 openelec user.info kernel: [ 0.070886] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' Mar 14 14:44:21 openelec user.info kernel: [ 0.070930] pci 0000:00:13.0: PCI bridge to [bus 02-04] Mar 14 14:44:21 openelec user.debug kernel: [ 0.070938] pci 0000:00:13.0: bridge window [mem 0xfea00000-0xfeafffff] Mar 14 14:44:21 openelec user.info kernel: [ 0.070983] pci 0000:02:00.0: PCI bridge to [bus 03-03] Mar 14 14:44:21 openelec user.info kernel: [ 0.071034] pci 0000:02:00.1: PCI bridge to [bus 04-04] Mar 14 14:44:21 openelec user.info kernel: [ 0.071108] pci 0000:00:13.1: PCI bridge to [bus 05-05](subtractive decode) Mar 14 14:44:21 openelec user.debug kernel: [ 0.071118] pci 0000:00:13.1: bridge window [io 0x0000-0xffff](subtractive decode) Mar 14 14:44:21 openelec user.debug kernel: [ 0.071122] pci 0000:00:13.1: bridge window [mem 0x00000000-0xffffffff](subtractive decode) Mar 14 14:44:21 openelec user.debug kernel: [ 0.071140] pci_bus 0000:00: on NUMA node 0 Mar 14 14:44:21 openelec user.debug kernel: [ 0.071145] ACPI: PCI Interrupt Routing Table [SB.PCI0._PRT] Mar 14 14:44:21 openelec user.debug kernel: [ 0.071307] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P1._PRT] Mar 14 14:44:21 openelec user.debug kernel: [ 0.071368] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P7._PRT] Mar 14 14:44:21 openelec user.debug kernel: [ 0.071457] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P7.P7P8._PRT] Mar 14 14:44:21 openelec user.debug kernel: [ 0.071517] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P7.P7P9._PRT] Mar 14 14:44:21 openelec user.debug kernel: [ 0.071579] ACPI: PCI Interrupt Routing Table [SB.PCI0.P2PB._PRT] Mar 14 14:44:21 openelec user.info kernel: [ 0.071700] pci0000:00: Requesting ACPI _OSC control (0x1d) Mar 14 14:44:21 openelec user.info kernel: [ 0.071705] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d Mar 14 14:44:21 openelec user.info kernel: [ 0.071707] ACPI _OSC control for PCIe not granted, disabling ASPM Mar 14 14:44:21 openelec user.info kernel: [ 0.080263] ACPI: PCI Interrupt Link [LNKA](IRQs 3 4 5 6 7 10 11 12 14 15) Mar 14 14:44:21 openelec user.info kernel: [ 0.080333] ACPI: PCI Interrupt Link [LNKB](IRQs 3 4 5 6 7 10 11 12 14 15) Mar 14 14:44:21 openelec user.info kernel: [ 0.080406] ACPI: PCI Interrupt Link [LNKC](IRQs 3 4 5 6 7 10 11 12 14 15) Mar 14 14:44:21 openelec user.info kernel: [ 0.080473] ACPI: PCI Interrupt Link [LNKD](IRQs 3 4 5 6 7 10 11 12 14 15) Mar 14 14:44:21 openelec user.info kernel: [ 0.080541] ACPI: PCI Interrupt Link [LNKE](IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. Mar 14 14:44:21 openelec user.info kernel: [ 0.080610] ACPI: PCI Interrupt Link [LNKF](IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. Mar 14 14:44:21 openelec user.info kernel: [ 0.080681] ACPI: PCI Interrupt Link [LNKG](IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. Mar 14 14:44:21 openelec user.info kernel: [ 0.080753] ACPI: PCI Interrupt Link [LNKH](IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. Mar 14 14:44:21 openelec user.info kernel: [ 0.080863] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none Mar 14 14:44:21 openelec user.info kernel: [ 0.080868] vgaarb: loaded Mar 14 14:44:21 openelec user.info kernel: [ 0.080870] vgaarb: bridge control possible 0000:01:00.0 Mar 14 14:44:21 openelec user.notice kernel: [ 0.080973] SCSI subsystem initialized Mar 14 14:44:21 openelec user.debug kernel: [ 0.081018] libata version 3.00 loaded. Mar 14 14:44:21 openelec user.info kernel: [ 0.081069] usbcore: registered new interface driver usbfs Mar 14 14:44:21 openelec user.info kernel: [ 0.081085] usbcore: registered new interface driver hub Mar 14 14:44:21 openelec user.info kernel: [ 0.081114] usbcore: registered new device driver usb Mar 14 14:44:21 openelec user.info kernel: [ 0.081169] PCI: Using ACPI for IRQ routing Mar 14 14:44:21 openelec user.debug kernel: [ 0.091314] PCI: pci_cache_line_size set to 64 bytes Mar 14 14:44:21 openelec user.debug kernel: [ 0.091402] reserve RAM buffer: 000000000009fc00 - 000000000009ffff Mar 14 14:44:21 openelec user.debug kernel: [ 0.091405] reserve RAM buffer: 000000007ffc0000 - 000000007fffffff Mar 14 14:44:21 openelec user.info kernel: [ 0.091807] pnp: PnP ACPI init Mar 14 14:44:21 openelec user.info kernel: [ 0.091821] ACPI: bus type pnp registered Mar 14 14:44:21 openelec user.debug kernel: [ 0.091923] pnp 00:00: [bus 00-ff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.091928] pnp 00:00: [io 0x0cf8-0x0cff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.091931] pnp 00:00: [io 0x0000-0x0cf7 window] Mar 14 14:44:21 openelec user.debug kernel: [ 0.091937] pnp 00:00: [io 0x0d00-0xffff window] Mar 14 14:44:21 openelec user.debug kernel: [ 0.091940] pnp 00:00: [mem 0x000a0000-0x000bffff window] Mar 14 14:44:21 openelec user.debug kernel: [ 0.091943] pnp 00:00: [mem 0x000d0000-0x000dffff window] Mar 14 14:44:21 openelec user.debug kernel: [ 0.091946] pnp 00:00: [mem 0x80000000-0xffffffff window] Mar 14 14:44:21 openelec user.debug kernel: [ 0.091992] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.092022] pnp 00:01: [dma 4] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092026] pnp 00:01: [io 0x0000-0x000f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092029] pnp 00:01: [io 0x0081-0x0083] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092031] pnp 00:01: [io 0x0087] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092034] pnp 00:01: [io 0x0089-0x008b] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092036] pnp 00:01: [io 0x008f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092038] pnp 00:01: [io 0x00c0-0x00df] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092066] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.092082] pnp 00:02: [io 0x0070-0x0071] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092087] pnp 00:02: [irq 8] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092118] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.092132] pnp 00:03: [io 0x0061] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092159] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.092173] pnp 00:04: [io 0x00f0-0x00ff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092177] pnp 00:04: [irq 13] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092205] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.092964] pnp 00:05: [io 0x03f8-0x03ff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092968] pnp 00:05: [irq 4] Mar 14 14:44:21 openelec user.debug kernel: [ 0.092971] pnp 00:05: [dma 0 disabled] Mar 14 14:44:21 openelec user.debug kernel: [ 0.093101] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.093913] pnp 00:06: [io 0x03f0-0x03f5] Mar 14 14:44:21 openelec user.debug kernel: [ 0.093917] pnp 00:06: [io 0x03f7] Mar 14 14:44:21 openelec user.debug kernel: [ 0.093920] pnp 00:06: [irq 6] Mar 14 14:44:21 openelec user.debug kernel: [ 0.093922] pnp 00:06: [dma 2] Mar 14 14:44:21 openelec user.debug kernel: [ 0.093990] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.095177] pnp 00:07: [io 0x0010-0x001f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095181] pnp 00:07: [io 0x0022-0x003f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095187] pnp 00:07: [io 0x0044-0x005f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095190] pnp 00:07: [io 0x0062-0x0063] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095192] pnp 00:07: [io 0x0065-0x006f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095195] pnp 00:07: [io 0x0072-0x007f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095197] pnp 00:07: [io 0x0080] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095200] pnp 00:07: [io 0x0084-0x0086] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095202] pnp 00:07: [io 0x0088] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095205] pnp 00:07: [io 0x008c-0x008e] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095207] pnp 00:07: [io 0x0090-0x009f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095210] pnp 00:07: [io 0x00a2-0x00bf] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095212] pnp 00:07: [io 0x00e0-0x00ef] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095215] pnp 00:07: [io 0x03e0-0x03e7] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095218] pnp 00:07: [mem 0xffb00000-0xffffffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095220] pnp 00:07: [io 0x04d0-0x04d1] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095223] pnp 00:07: [io 0x0800-0x087f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095226] pnp 00:07: [io 0x0400-0x041f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095228] pnp 00:07: [io 0x0000-0xffffffff disabled] Mar 14 14:44:21 openelec user.info kernel: [ 0.095290] system 00:07: [io 0x03e0-0x03e7] has been reserved Mar 14 14:44:21 openelec user.info kernel: [ 0.095294] system 00:07: [io 0x04d0-0x04d1] has been reserved Mar 14 14:44:21 openelec user.info kernel: [ 0.095297] system 00:07: [io 0x0800-0x087f] has been reserved Mar 14 14:44:21 openelec user.info kernel: [ 0.095301] system 00:07: [io 0x0400-0x041f] has been reserved Mar 14 14:44:21 openelec user.info kernel: [ 0.095305] system 00:07: [mem 0xffb00000-0xffffffff] has been reserved Mar 14 14:44:21 openelec user.debug kernel: [ 0.095309] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.095360] pnp 00:08: [io 0x0060] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095364] pnp 00:08: [io 0x0064] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095366] pnp 00:08: [irq 1] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095406] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.095503] pnp 00:09: [mem 0xfec00000-0xfec00fff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095507] pnp 00:09: [mem 0xfee00000-0xfee00fff] Mar 14 14:44:21 openelec user.info kernel: [ 0.095553] system 00:09: [mem 0xfec00000-0xfec00fff] has been reserved Mar 14 14:44:21 openelec user.info kernel: [ 0.095557] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved Mar 14 14:44:21 openelec user.debug kernel: [ 0.095561] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.095755] pnp 00:0a: [io 0x0000-0xffffffff disabled] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095759] pnp 00:0a: [io 0x0c00-0x0c0f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095762] pnp 00:0a: [io 0x0d00-0x0d0f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095764] pnp 00:0a: [io 0x0a20-0x0a2f] Mar 14 14:44:21 openelec user.debug kernel: [ 0.095767] pnp 00:0a: [io 0x0a30-0x0a3f] Mar 14 14:44:21 openelec user.info kernel: [ 0.095816] system 00:0a: [io 0x0c00-0x0c0f] has been reserved Mar 14 14:44:21 openelec user.info kernel: [ 0.095820] system 00:0a: [io 0x0d00-0x0d0f] has been reserved Mar 14 14:44:21 openelec user.info kernel: [ 0.095824] system 00:0a: [io 0x0a20-0x0a2f] has been reserved Mar 14 14:44:21 openelec user.info kernel: [ 0.095827] system 00:0a: [io 0x0a30-0x0a3f] has been reserved Mar 14 14:44:21 openelec user.debug kernel: [ 0.095831] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.095876] pnp 00:0b: [mem 0xe0000000-0xefffffff] Mar 14 14:44:21 openelec user.info kernel: [ 0.095924] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved Mar 14 14:44:21 openelec user.debug kernel: [ 0.095929] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) Mar 14 14:44:21 openelec user.debug kernel: [ 0.096182] pnp 00:0c: [mem 0x00000000-0x0009ffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.096186] pnp 00:0c: [mem 0x000c0000-0x000cffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.096189] pnp 00:0c: [mem 0x000e0000-0x000fffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.096191] pnp 00:0c: [mem 0x00100000-0x7fffffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.096194] pnp 00:0c: [mem 0x00000000-0xffffffff disabled] Mar 14 14:44:21 openelec user.info kernel: [ 0.096255] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved Mar 14 14:44:21 openelec user.info kernel: [ 0.096259] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved Mar 14 14:44:21 openelec user.info kernel: [ 0.096263] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved Mar 14 14:44:21 openelec user.info kernel: [ 0.096266] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved Mar 14 14:44:21 openelec user.debug kernel: [ 0.096271] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) Mar 14 14:44:21 openelec user.info kernel: [ 0.096462] pnp: PnP ACPI: found 13 devices Mar 14 14:44:21 openelec user.info kernel: [ 0.096465] ACPI: ACPI bus type pnp unregistered Mar 14 14:44:21 openelec user.info kernel: [ 0.100001] cfg80211: Calling CRDA to update world regulatory domain Mar 14 14:44:21 openelec user.info kernel: [ 0.116582] Switching to clocksource acpi_pm Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] PCI: max bus depth: 2 pci_try_num: 3 Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] pci 0000:00:01.0: PCI bridge to [bus 01-01] Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] pci 0000:00:01.0: bridge window [mem 0xfa900000-0xfe9fffff] Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] pci 0000:00:01.0: bridge window [mem 0x9ff00000-0xbfefffff pref] Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] pci 0000:02:00.0: PCI bridge to [bus 03-03] Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] pci 0000:02:00.1: PCI bridge to [bus 04-04] Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] pci 0000:00:13.0: PCI bridge to [bus 02-04] Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] pci 0000:00:13.0: bridge window [mem 0xfea00000-0xfeafffff] Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] pci 0000:00:13.1: PCI bridge to [bus 05-05] Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci 0000:00:01.0: setting latency timer to 64 Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci 0000:00:13.0: setting latency timer to 64 Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci 0000:02:00.0: setting latency timer to 64 Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci 0000:02:00.1: setting latency timer to 64 Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci 0000:00:13.1: setting latency timer to 64 Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfe9fffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci_bus 0000:01: resource 2 [mem 0x9ff00000-0xbfefffff pref] Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff] Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] NET: Registered protocol family 2 Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] TCP: Hash tables configured (established 131072 bind 65536) Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] TCP reno registered Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] UDP hash table entries: 512 (order: 2, 16384 bytes) Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] NET: Registered protocol family 1 Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] RPC: Registered named UNIX socket transport module. Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] RPC: Registered udp transport module. Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] RPC: Registered tcp transport module. Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] RPC: Registered tcp NFSv4.1 backchannel transport module. Mar 14 14:44:21 openelec user.info kernel: [ 0.116637] pci 0000:00:01.0: disabling DAC on VIA PCI bridge Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] pci 0000:01:00.0: Boot video device Mar 14 14:44:21 openelec user.debug kernel: [ 0.116637] PCI: CLS 32 bytes, default 64 Mar 14 14:44:21 openelec user.info kernel: [ 0.120993] Intel AES-NI instructions are not detected. Mar 14 14:44:21 openelec user.warn kernel: [ 0.127300] highmem bounce pool size: 64 pages Mar 14 14:44:21 openelec user.info kernel: [ 0.141078] squashfs: version 4.0 (2009/01/31) Phillip Lougher Mar 14 14:44:21 openelec user.info kernel: [ 0.141492] fuse init (API version 7.17) Mar 14 14:44:21 openelec user.info kernel: [ 0.141684] JFS: nTxBlock = 8192, nTxLock = 65536 Mar 14 14:44:21 openelec user.info kernel: [ 0.146721] SGI XFS with security attributes, large block/inode numbers, no debug enabled Mar 14 14:44:21 openelec user.info kernel: [ 0.147367] msgmni has been set to 1718 Mar 14 14:44:21 openelec user.info kernel: [ 0.147744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) Mar 14 14:44:21 openelec user.info kernel: [ 0.147749] io scheduler noop registered Mar 14 14:44:21 openelec user.info kernel: [ 0.147770] io scheduler cfq registered (default) Mar 14 14:44:21 openelec user.debug kernel: [ 0.147895] pcieport 0000:02:00.0: setting latency timer to 64 Mar 14 14:44:21 openelec user.debug kernel: [ 0.147958] pcieport 0000:02:00.0: irq 16 for MSI/MSI-X Mar 14 14:44:21 openelec user.debug kernel: [ 0.148034] pcieport 0000:02:00.1: setting latency timer to 64 Mar 14 14:44:21 openelec use

ghost commented 12 years ago

dmesg:

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.1.0 (jetstream@1801-lin007) (gcc version 4.5.3 (GCC) ) #1 SMP PREEMPT Tue Oct 25 03:30:20 CEST 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable) [ 0.000000] BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ffce000 - 000000007fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: System manufacturer System Product Name/P5V800-MX, BIOS 0802 07/12/2006 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7ffc0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 02000000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1ffb000-2000000 [ 0.000000] ACPI: RSDP 000fa8d0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 7ffc0000 00030 (v01 A M I OEMRSDT 07000612 MSFT 00000097) [ 0.000000] ACPI: FACP 7ffc0200 00084 (v02 A M I OEMFACP 07000612 MSFT 00000097) [ 0.000000] ACPI: DSDT 7ffc0430 04B5D (v01 A0398 A0398001 00000001 INTL 02002026) [ 0.000000] ACPI: FACS 7ffce000 00040 [ 0.000000] ACPI: MCFG 7ffc03f0 0003C (v01 A M I OEMMCFG 07000612 MSFT 00000097) [ 0.000000] ACPI: OEMB 7ffce040 00046 (v01 A M I AMI_OEM 07000612 MSFT 00000097) [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0007ffc0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffc0 [ 0.000000] On node 0 totalpages: 524111 [ 0.000000] free_area_init_node: node 0, pgdat c182e180, node_mem_map f67fd200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2320 pages used for memmap [ 0.000000] HighMem zone: 294578 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: No APIC-table, disabling MPS [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Found and enabled local APIC! [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages/cpu @f6000000 s22976 r0 d22080 u4194304 [ 0.000000] pcpu-alloc: s22976 r0 d22080 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520015 [ 0.000000] Kernel command line: fastboot root=/dev/ram0 rdinit=/init threadirqs boot=LABEL=System disk=LABEL=Storage quiet vga=792 BOOT_IMAGE=/KERNEL [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffc0) [ 0.000000] Memory: 2067520k/2096896k available (6258k kernel code, 28924k reserved, 2150k data, 2916k init, 1187592k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1837000 - 0xc1b10000 (2916 kB) [ 0.000000] .data : 0xc161c9e8 - 0xc18362c0 (2150 kB) [ 0.000000] .text : 0xc1000000 - 0xc161c9e8 (6258 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:512 [ 0.000000] CPU 0 irqstacks, hard=f5c0c000 soft=f5c0e000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration failed [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: using PMTIMER reference calibration [ 0.000000] Detected 2999.843 MHz processor. [ 0.013334] Calibrating delay loop (skipped), value calculated using timer frequency.. 6002.67 BogoMIPS (lpj=9999476) [ 0.013341] pid_max: default: 32768 minimum: 301 [ 0.013404] Mount-cache hash table entries: 512 [ 0.013649] Initializing cgroup subsys cpuacct [ 0.013662] Initializing cgroup subsys freezer [ 0.013695] CPU: Physical Processor ID: 0 [ 0.013697] CPU: Processor Core ID: 0 [ 0.013700] using mwait in idle threads. [ 0.013906] SMP alternatives: switching to UP code [ 0.024003] Freeing SMP alternatives: 24k freed [ 0.024011] ACPI: Core revision 20110623 [ 0.027086] ACPI: setting ELCR to 0200 (from 0c28) [ 0.030063] weird, boot CPU (#0) not listed by the BIOS. [ 0.030066] SMP motherboard not detected. [ 0.030069] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.033331] SMP disabled [ 0.033331] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.033331] ... version: 0 [ 0.033331] ... bit width: 40 [ 0.033331] ... generic registers: 18 [ 0.033331] ... value mask: 000000ffffffffff [ 0.033331] ... max period: 0000007fffffffff [ 0.033331] ... fixed-purpose events: 0 [ 0.033331] ... event mask: 000000000003ffff [ 0.050011] Brought up 1 CPUs [ 0.050015] Total of 1 processors activated (6002.67 BogoMIPS). [ 0.050205] devtmpfs: initialized [ 0.050574] NET: Registered protocol family 16 [ 0.050682] ACPI: bus type pci registered [ 0.050746] PCI: MMCONFIG for domain 0000 [bus 02-ff] at [mem 0xe0200000-0xefffffff](base 0xe0000000) [ 0.050751] PCI: MMCONFIG at [mem 0xe0200000-0xefffffff] reserved in E820 [ 0.050753] PCI: Using MMCONFIG for extended config space [ 0.050756] PCI: Using configuration type 1 for base access [ 0.052422] bio: create slab at 0 [ 0.052505] ACPI: Added _OSI(Module Device) [ 0.052508] ACPI: Added _OSI(Processor Device) [ 0.052511] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.052514] ACPI: Added _OSI(Processor Aggregator Device) [ 0.053555] ACPI: EC: Look up EC in DSDT [ 0.055451] ACPI: Executed 1 blocks of module-level executable AML code [ 0.058615] ACPI: Interpreter enabled [ 0.058628] ACPI: (supports S0 S1 S3 S5) [ 0.058650] ACPI: Using PIC for interrupt routing [ 0.068255] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.068353] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-ff]) [ 0.068531] pci_root PNP0A03:00: host bridge window io 0x0000-0x0cf7 [ 0.068536] pci_root PNP0A03:00: host bridge window io 0x0d00-0xffff [ 0.068539] pci_root PNP0A03:00: host bridge window mem 0x000a0000-0x000bffff [ 0.068542] pci_root PNP0A03:00: host bridge window mem 0x000d0000-0x000dffff [ 0.068546] pci_root PNP0A03:00: host bridge window mem 0x80000000-0xffffffff [ 0.068567] pci 0000:00:00.0: [1106:0314] type 0 class 0x000600 [ 0.068581] pci 0000:00:00.0: reg 10: [mem 0xc0000000-0xdfffffff pref] [ 0.068663] pci 0000:00:00.1: [1106:1314] type 0 class 0x000600 [ 0.068722] pci 0000:00:00.2: [1106:2314] type 0 class 0x000600 [ 0.068783] pci 0000:00:00.3: [1106:3208] type 0 class 0x000600 [ 0.068841] pci 0000:00:00.4: [1106:4314] type 0 class 0x000600 [ 0.068902] pci 0000:00:00.7: [1106:7314] type 0 class 0x000600 [ 0.068963] pci 0000:00:01.0: [1106:b198] type 1 class 0x000604 [ 0.069015] pci 0000:00:01.0: supports D1 [ 0.069057] pci 0000:00:0f.0: [1106:3349] type 0 class 0x000101 [ 0.069082] pci 0000:00:0f.0: reg 10: [io 0xec00-0xec07] [ 0.069094] pci 0000:00:0f.0: reg 14: [io 0xe880-0xe883] [ 0.069105] pci 0000:00:0f.0: reg 18: [io 0xe800-0xe807] [ 0.069117] pci 0000:00:0f.0: reg 1c: [io 0xe480-0xe483] [ 0.069129] pci 0000:00:0f.0: reg 20: [io 0xe400-0xe40f] [ 0.069141] pci 0000:00:0f.0: reg 24: [mem 0xfebffc00-0xfebfffff] [ 0.069180] pci 0000:00:0f.0: PME# supported from D3hot [ 0.069186] pci 0000:00:0f.0: PME# disabled [ 0.069209] pci 0000:00:0f.1: [1106:0571] type 0 class 0x000101 [ 0.069265] pci 0000:00:0f.1: reg 20: [io 0xfc00-0xfc0f] [ 0.069332] pci 0000:00:10.0: [1106:3038] type 0 class 0x000c03 [ 0.069386] pci 0000:00:10.0: reg 20: [io 0xe080-0xe09f] [ 0.069425] pci 0000:00:10.0: supports D1 D2 [ 0.069428] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.069433] pci 0000:00:10.0: PME# disabled [ 0.069452] pci 0000:00:10.1: [1106:3038] type 0 class 0x000c03 [ 0.069506] pci 0000:00:10.1: reg 20: [io 0xe000-0xe01f] [ 0.069545] pci 0000:00:10.1: supports D1 D2 [ 0.069548] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.069553] pci 0000:00:10.1: PME# disabled [ 0.069575] pci 0000:00:10.2: [1106:3038] type 0 class 0x000c03 [ 0.069629] pci 0000:00:10.2: reg 20: [io 0xdc00-0xdc1f] [ 0.069668] pci 0000:00:10.2: supports D1 D2 [ 0.069670] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.069675] pci 0000:00:10.2: PME# disabled [ 0.069695] pci 0000:00:10.3: [1106:3038] type 0 class 0x000c03 [ 0.069748] pci 0000:00:10.3: reg 20: [io 0xd880-0xd89f] [ 0.069787] pci 0000:00:10.3: supports D1 D2 [ 0.069790] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.069795] pci 0000:00:10.3: PME# disabled [ 0.069816] pci 0000:00:10.4: [1106:3104] type 0 class 0x000c03 [ 0.069839] pci 0000:00:10.4: reg 10: [mem 0xfebff800-0xfebff8ff] [ 0.069917] pci 0000:00:10.4: supports D1 D2 [ 0.069919] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.069924] pci 0000:00:10.4: PME# disabled [ 0.069950] pci 0000:00:11.0: [1106:3287] type 0 class 0x000601 [ 0.070081] pci 0000:00:11.7: [1106:287e] type 0 class 0x000600 [ 0.070150] pci 0000:00:12.0: [1106:3065] type 0 class 0x000200 [ 0.070171] pci 0000:00:12.0: reg 10: [io 0xd400-0xd4ff] [ 0.070183] pci 0000:00:12.0: reg 14: [mem 0xfebff400-0xfebff4ff] [ 0.070249] pci 0000:00:12.0: supports D1 D2 [ 0.070252] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.070257] pci 0000:00:12.0: PME# disabled [ 0.070272] pci 0000:00:13.0: [1106:287b] type 1 class 0x000604 [ 0.070314] pci 0000:00:13.1: [1106:287a] type 1 class 0x000604 [ 0.070416] pci 0000:01:00.0: [10de:0221] type 0 class 0x000300 [ 0.070435] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 0.070446] pci 0000:01:00.0: reg 14: [mem 0xa0000000-0xafffffff pref] [ 0.070456] pci 0000:01:00.0: reg 18: [mem 0xfc000000-0xfcffffff] [ 0.070485] pci 0000:01:00.0: reg 30: [mem 0xfe9e0000-0xfe9fffff pref] [ 0.070546] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.070554] pci 0000:00:01.0: bridge window [mem 0xfa900000-0xfe9fffff] [ 0.070559] pci 0000:00:01.0: bridge window [mem 0x9ff00000-0xbfefffff pref] [ 0.070586] pci 0000:02:00.0: [1106:287c] type 1 class 0x000604 [ 0.070646] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.070651] pci 0000:02:00.0: PME# disabled [ 0.070677] pci 0000:02:00.1: [1106:287d] type 1 class 0x000604 [ 0.070736] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.070740] pci 0000:02:00.1: PME# disabled [ 0.070762] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.070781] pci 0000:02:01.0: [1106:3288] type 0 class 0x000403 [ 0.070795] pci 0000:02:01.0: reg 10: [mem 0xfeafc000-0xfeafffff] [ 0.070869] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold [ 0.070874] pci 0000:02:01.0: PME# disabled [ 0.070886] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.070930] pci 0000:00:13.0: PCI bridge to [bus 02-04] [ 0.070938] pci 0000:00:13.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.070983] pci 0000:02:00.0: PCI bridge to [bus 03-03] [ 0.071034] pci 0000:02:00.1: PCI bridge to [bus 04-04] [ 0.071108] pci 0000:00:13.1: PCI bridge to [bus 05-05](subtractive decode) [ 0.071118] pci 0000:00:13.1: bridge window [io 0x0000-0xffff](subtractive decode) [ 0.071122] pci 0000:00:13.1: bridge window [mem 0x00000000-0xffffffff](subtractive decode) [ 0.071140] pci_bus 0000:00: on NUMA node 0 [ 0.071145] ACPI: PCI Interrupt Routing Table [SB.PCI0._PRT] [ 0.071307] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P1._PRT] [ 0.071368] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P7._PRT] [ 0.071457] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P7.P7P8._PRT] [ 0.071517] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P7.P7P9._PRT] [ 0.071579] ACPI: PCI Interrupt Routing Table [SB.PCI0.P2PB._PRT] [ 0.071700] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.071705] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.071707] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.080263] ACPI: PCI Interrupt Link [LNKA](IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.080333] ACPI: PCI Interrupt Link [LNKB](IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.080406] ACPI: PCI Interrupt Link [LNKC](IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.080473] ACPI: PCI Interrupt Link [LNKD](IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.080541] ACPI: PCI Interrupt Link [LNKE](IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. [ 0.080610] ACPI: PCI Interrupt Link [LNKF](IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. [ 0.080681] ACPI: PCI Interrupt Link [LNKG](IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. [ 0.080753] ACPI: PCI Interrupt Link [LNKH](IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. [ 0.080863] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.080868] vgaarb: loaded [ 0.080870] vgaarb: bridge control possible 0000:01:00.0 [ 0.080973] SCSI subsystem initialized [ 0.081018] libata version 3.00 loaded. [ 0.081069] usbcore: registered new interface driver usbfs [ 0.081085] usbcore: registered new interface driver hub [ 0.081114] usbcore: registered new device driver usb [ 0.081169] PCI: Using ACPI for IRQ routing [ 0.091314] PCI: pci_cache_line_size set to 64 bytes [ 0.091402] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.091405] reserve RAM buffer: 000000007ffc0000 - 000000007fffffff [ 0.091807] pnp: PnP ACPI init [ 0.091821] ACPI: bus type pnp registered [ 0.091923] pnp 00:00: [bus 00-ff] [ 0.091928] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.091931] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.091937] pnp 00:00: [io 0x0d00-0xffff window] [ 0.091940] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.091943] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.091946] pnp 00:00: [mem 0x80000000-0xffffffff window] [ 0.091992] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.092022] pnp 00:01: [dma 4] [ 0.092026] pnp 00:01: [io 0x0000-0x000f] [ 0.092029] pnp 00:01: [io 0x0081-0x0083] [ 0.092031] pnp 00:01: [io 0x0087] [ 0.092034] pnp 00:01: [io 0x0089-0x008b] [ 0.092036] pnp 00:01: [io 0x008f] [ 0.092038] pnp 00:01: [io 0x00c0-0x00df] [ 0.092066] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.092082] pnp 00:02: [io 0x0070-0x0071] [ 0.092087] pnp 00:02: [irq 8] [ 0.092118] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.092132] pnp 00:03: [io 0x0061] [ 0.092159] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.092173] pnp 00:04: [io 0x00f0-0x00ff] [ 0.092177] pnp 00:04: [irq 13] [ 0.092205] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.092964] pnp 00:05: [io 0x03f8-0x03ff] [ 0.092968] pnp 00:05: [irq 4] [ 0.092971] pnp 00:05: [dma 0 disabled] [ 0.093101] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.093913] pnp 00:06: [io 0x03f0-0x03f5] [ 0.093917] pnp 00:06: [io 0x03f7] [ 0.093920] pnp 00:06: [irq 6] [ 0.093922] pnp 00:06: [dma 2] [ 0.093990] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.095177] pnp 00:07: [io 0x0010-0x001f] [ 0.095181] pnp 00:07: [io 0x0022-0x003f] [ 0.095187] pnp 00:07: [io 0x0044-0x005f] [ 0.095190] pnp 00:07: [io 0x0062-0x0063] [ 0.095192] pnp 00:07: [io 0x0065-0x006f] [ 0.095195] pnp 00:07: [io 0x0072-0x007f] [ 0.095197] pnp 00:07: [io 0x0080] [ 0.095200] pnp 00:07: [io 0x0084-0x0086] [ 0.095202] pnp 00:07: [io 0x0088] [ 0.095205] pnp 00:07: [io 0x008c-0x008e] [ 0.095207] pnp 00:07: [io 0x0090-0x009f] [ 0.095210] pnp 00:07: [io 0x00a2-0x00bf] [ 0.095212] pnp 00:07: [io 0x00e0-0x00ef] [ 0.095215] pnp 00:07: [io 0x03e0-0x03e7] [ 0.095218] pnp 00:07: [mem 0xffb00000-0xffffffff] [ 0.095220] pnp 00:07: [io 0x04d0-0x04d1] [ 0.095223] pnp 00:07: [io 0x0800-0x087f] [ 0.095226] pnp 00:07: [io 0x0400-0x041f] [ 0.095228] pnp 00:07: [io 0x0000-0xffffffff disabled] [ 0.095290] system 00:07: [io 0x03e0-0x03e7] has been reserved [ 0.095294] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.095297] system 00:07: [io 0x0800-0x087f] has been reserved [ 0.095301] system 00:07: [io 0x0400-0x041f] has been reserved [ 0.095305] system 00:07: [mem 0xffb00000-0xffffffff] has been reserved [ 0.095309] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.095360] pnp 00:08: [io 0x0060] [ 0.095364] pnp 00:08: [io 0x0064] [ 0.095366] pnp 00:08: [irq 1] [ 0.095406] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.095503] pnp 00:09: [mem 0xfec00000-0xfec00fff] [ 0.095507] pnp 00:09: [mem 0xfee00000-0xfee00fff] [ 0.095553] system 00:09: [mem 0xfec00000-0xfec00fff] has been reserved [ 0.095557] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.095561] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.095755] pnp 00:0a: [io 0x0000-0xffffffff disabled] [ 0.095759] pnp 00:0a: [io 0x0c00-0x0c0f] [ 0.095762] pnp 00:0a: [io 0x0d00-0x0d0f] [ 0.095764] pnp 00:0a: [io 0x0a20-0x0a2f] [ 0.095767] pnp 00:0a: [io 0x0a30-0x0a3f] [ 0.095816] system 00:0a: [io 0x0c00-0x0c0f] has been reserved [ 0.095820] system 00:0a: [io 0x0d00-0x0d0f] has been reserved [ 0.095824] system 00:0a: [io 0x0a20-0x0a2f] has been reserved [ 0.095827] system 00:0a: [io 0x0a30-0x0a3f] has been reserved [ 0.095831] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.095876] pnp 00:0b: [mem 0xe0000000-0xefffffff] [ 0.095924] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved [ 0.095929] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.096182] pnp 00:0c: [mem 0x00000000-0x0009ffff] [ 0.096186] pnp 00:0c: [mem 0x000c0000-0x000cffff] [ 0.096189] pnp 00:0c: [mem 0x000e0000-0x000fffff] [ 0.096191] pnp 00:0c: [mem 0x00100000-0x7fffffff] [ 0.096194] pnp 00:0c: [mem 0x00000000-0xffffffff disabled] [ 0.096255] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.096259] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.096263] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.096266] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved [ 0.096271] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.096462] pnp: PnP ACPI: found 13 devices [ 0.096465] ACPI: ACPI bus type pnp unregistered [ 0.100001] cfg80211: Calling CRDA to update world regulatory domain [ 0.116582] Switching to clocksource acpi_pm [ 0.116637] PCI: max bus depth: 2 pci_try_num: 3 [ 0.116637] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.116637] pci 0000:00:01.0: bridge window [mem 0xfa900000-0xfe9fffff] [ 0.116637] pci 0000:00:01.0: bridge window [mem 0x9ff00000-0xbfefffff pref] [ 0.116637] pci 0000:02:00.0: PCI bridge to [bus 03-03] [ 0.116637] pci 0000:02:00.1: PCI bridge to [bus 04-04] [ 0.116637] pci 0000:00:13.0: PCI bridge to [bus 02-04] [ 0.116637] pci 0000:00:13.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.116637] pci 0000:00:13.1: PCI bridge to [bus 05-05] [ 0.116637] pci 0000:00:01.0: setting latency timer to 64 [ 0.116637] pci 0000:00:13.0: setting latency timer to 64 [ 0.116637] pci 0000:02:00.0: setting latency timer to 64 [ 0.116637] pci 0000:02:00.1: setting latency timer to 64 [ 0.116637] pci 0000:00:13.1: setting latency timer to 64 [ 0.116637] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.116637] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.116637] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfe9fffff] [ 0.116637] pci_bus 0000:01: resource 2 [mem 0x9ff00000-0xbfefffff pref] [ 0.116637] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.116637] pci_bus 0000:05: resource 4 [io 0x0000-0xffff] [ 0.116637] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff] [ 0.116637] NET: Registered protocol family 2 [ 0.116637] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.116637] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.116637] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.116637] TCP: Hash tables configured (established 131072 bind 65536) [ 0.116637] TCP reno registered [ 0.116637] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.116637] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.116637] NET: Registered protocol family 1 [ 0.116637] RPC: Registered named UNIX socket transport module. [ 0.116637] RPC: Registered udp transport module. [ 0.116637] RPC: Registered tcp transport module. [ 0.116637] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.116637] pci 0000:00:01.0: disabling DAC on VIA PCI bridge [ 0.116637] pci 0000:01:00.0: Boot video device [ 0.116637] PCI: CLS 32 bytes, default 64 [ 0.120993] Intel AES-NI instructions are not detected. [ 0.127300] highmem bounce pool size: 64 pages [ 0.141078] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.141492] fuse init (API version 7.17) [ 0.141684] JFS: nTxBlock = 8192, nTxLock = 65536 [ 0.146721] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 0.147367] msgmni has been set to 1718 [ 0.147744] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.147749] io scheduler noop registered [ 0.147770] io scheduler cfq registered (default) [ 0.147895] pcieport 0000:02:00.0: setting latency timer to 64 [ 0.147958] pcieport 0000:02:00.0: irq 16 for MSI/MSI-X [ 0.148034] pcieport 0000:02:00.1: setting latency timer to 64 [ 0.148087] pcieport 0000:02:00.1: irq 17 for MSI/MSI-X [ 0.148246] vesafb: mode is 1024x768x32, linelength=4096, pages=1 [ 0.148249] vesafb: protected mode interface info at c000:d3a0 [ 0.148253] vesafb: pmi: set display start = c00cd3d6, set palette = c00cd440 [ 0.148255] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da [ 0.148272] vesafb: scrolling: redraw [ 0.148275] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.149412] vesafb: framebuffer at 0xa0000000, mapped to 0xf8500000, using 6144k, total 262144k [ 0.187665] Console: switching to colour frame buffer device 128x48 [ 0.225683] fb0: VESA VGA frame buffer device [ 0.225839] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.225850] ACPI: Sleep Button [SLPB] [ 0.225903] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.225909] ACPI: Power Button [PWRB] [ 0.225964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.225969] ACPI: Power Button [PWRF] [ 0.226231] ACPI: acpi_idle registered with cpuidle [ 0.230880] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.251428] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.297350] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.303534] Linux agpgart interface v0.103 [ 0.303571] agpgart: Detected VIA VT3314 chipset [ 0.331266] agpgart-via 0000:00:00.0: AGP aperture is 512M @ 0xc0000000 [ 0.331334] [drm] Initialized drm 1.1.0 20060810 [ 0.331353] [drm] drm/i915 can't work without intel_agp module! [ 0.332719] brd: module loaded [ 0.333452] loop: module loaded [ 0.333547] ahci 0000:00:0f.0: version 3.0 [ 0.333696] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 [ 0.333700] PCI: setting IRQ 10 as level-triggered [ 0.333708] ahci 0000:00:0f.0: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 0.333770] ahci 0000:00:0f.0: irq 18 for MSI/MSI-X [ 0.333783] ahci 0000:00:0f.0: controller can't do NCQ, turning off CAP_NCQ [ 0.333785] ahci 0000:00:0f.0: controller can't do PMP, turning off CAP_PMP [ 0.333841] ahci 0000:00:0f.0: PCI: Disallowing DAC for device [ 0.333870] ahci 0000:00:0f.0: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 0.333874] ahci 0000:00:0f.0: flags: 64bit pm led clo pio slum part [ 0.334785] scsi0 : ahci [ 0.334884] scsi1 : ahci [ 0.334952] scsi2 : ahci [ 0.335015] scsi3 : ahci [ 0.335342] ata1: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd00 irq 18 [ 0.335347] ata2: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffd80 irq 18 [ 0.335351] ata3: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe00 irq 18 [ 0.335354] ata4: SATA max UDMA/133 abar m1024@0xfebffc00 port 0xfebffe80 irq 18 [ 0.335857] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.335860] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.335880] e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k [ 0.335882] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 0.335902] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k [ 0.335904] Copyright (c) 2007-2011 Intel Corporation. [ 0.335938] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 0.335940] Copyright (c) 2007 Atheros Corporation. [ 0.335985] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 0.336016] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 0.336032] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.336034] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.336101] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011) [ 0.336184] sky2: driver version 1.29 [ 0.336215] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker [ 0.336326] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 0.336330] PCI: setting IRQ 11 as level-triggered [ 0.336338] via-rhine 0000:00:12.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.336611] via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1d400, 00:17:31:20:4c:f9, IRQ 11 [ 0.337330] via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000 [ 0.337479] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.337595] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 [ 0.337599] PCI: setting IRQ 5 as level-triggered [ 0.337607] ehci_hcd 0000:00:10.4: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 0.337623] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 0.337631] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 [ 0.337672] ehci_hcd 0000:00:10.4: debug port 1 [ 0.337739] ehci_hcd 0000:00:10.4: irq 5, io mem 0xfebff800 [ 0.346696] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 [ 0.346879] hub 1-0:1.0: USB hub found [ 0.346885] hub 1-0:1.0: 8 ports detected [ 0.346965] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.346982] uhci_hcd: USB Universal Host Controller Interface driver [ 0.347016] uhci_hcd 0000:00:10.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 0.347024] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 0.347030] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 0.347075] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000e080 [ 0.347230] hub 2-0:1.0: USB hub found [ 0.347236] hub 2-0:1.0: 2 ports detected [ 0.347298] uhci_hcd 0000:00:10.1: PCI INT C -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5 [ 0.347306] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 0.347312] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3 [ 0.347356] uhci_hcd 0000:00:10.1: irq 5, io base 0x0000e000 [ 0.347508] hub 3-0:1.0: USB hub found [ 0.347513] hub 3-0:1.0: 2 ports detected [ 0.347570] uhci_hcd 0000:00:10.2: PCI INT B -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 0.347577] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 0.347583] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4 [ 0.347627] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000dc00 [ 0.347770] hub 4-0:1.0: USB hub found [ 0.347775] hub 4-0:1.0: 2 ports detected [ 0.347939] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 3 [ 0.347942] PCI: setting IRQ 3 as level-triggered [ 0.347950] uhci_hcd 0000:00:10.3: PCI INT D -> Link[LNKD] -> GSI 3 (level, low) -> IRQ 3 [ 0.347958] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 0.347964] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5 [ 0.348015] uhci_hcd 0000:00:10.3: irq 3, io base 0x0000d880 [ 0.348162] hub 5-0:1.0: USB hub found [ 0.348168] hub 5-0:1.0: 2 ports detected [ 0.348233] Initializing USB Mass Storage driver... [ 0.348273] usbcore: registered new interface driver usb-storage [ 0.348275] USB Mass Storage support registered. [ 0.348350] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.348353] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.348553] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.348639] mousedev: PS/2 mouse device common for all mice [ 0.348888] rtc_cmos 00:02: RTC can wake from S4 [ 0.349042] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.349098] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 0.349114] i2c /dev entries driver [ 0.349327] lirc_dev: IR Remote Control driver registered, major 251 [ 0.349330] IR NEC protocol handler initialized [ 0.349332] IR RC5(x) protocol handler initialized [ 0.349334] IR RC6 protocol handler initialized [ 0.349336] IR JVC protocol handler initialized [ 0.349338] IR Sony protocol handler initialized [ 0.349340] IR RC5 (streamzap) protocol handler initialized [ 0.349341] IR MCE Keyboard/mouse protocol handler initialized [ 0.349347] cpuidle: using governor ladder [ 0.349349] EFI Variables Facility v0.08 2004-May-17 [ 0.349580] usbcore: registered new interface driver usbhid [ 0.349583] usbhid: USB HID core driver [ 0.349684] Netfilter messages via NETLINK v0.30. [ 0.349957] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.349980] TCP cubic registered [ 0.350172] NET: Registered protocol family 10 [ 0.351021] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.351037] NET: Registered protocol family 17 [ 0.351054] lib80211: common routines for IEEE802.11 drivers [ 0.351058] lib80211_crypt: registered algorithm 'NULL' [ 0.351060] Registering the dns_resolver key type [ 0.351079] Using IPI No-Shortcut mode [ 0.357845] rtc_cmos 00:02: setting system clock to 2012-03-14 14:44:20 UTC (1331736260) [ 0.372765] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.653362] usb 1-2: new high speed USB device number 2 using ehci_hcd [ 0.656692] ata2: SATA link down (SStatus 0 SControl 300) [ 0.656727] ata3: SATA link down (SStatus 0 SControl 300) [ 0.656753] ata4: SATA link down (SStatus 0 SControl 300) [ 0.820019] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.820550] ata1.00: ATA-7: WDC WD1600JS-00NCB1, 10.02E02, max UDMA/133 [ 0.820555] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.821170] ata1.00: configured for UDMA/133 [ 0.821309] scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00N 10.0 PQ: 0 ANSI: 5 [ 0.821493] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.821592] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 0.821655] sd 0:0:0:0: [sda] Write Protect is off [ 0.821660] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.821688] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.833440] sda: sda1 sda2 [ 0.833699] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.833720] Freeing unused kernel memory: 2916k freed [ 0.943466] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 0.950122] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 0.966838] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 0.996804] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 1.003467] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities [ 1.073366] usb 3-2: new low speed USB device number 2 using uhci_hcd [ 1.123352] Refined TSC clocksource calibration: 3000.106 MHz. [ 1.123359] Switching to clocksource tsc [ 1.131934] EXT4-fs (sda2): recovery complete [ 1.132090] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 1.261192] input: HP HP Wireless 3 Button Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input4 [ 1.261316] generic-usb 0003:0461:4D89.0001: input,hidraw0: USB HID v1.10 Mouse [HP HP Wireless 3 Button Mouse] on usb-0000:00:10.1-2/input0

[ 1.750179] udevd[177]: starting version 173 [ 2.831867] snd_hda_intel 0000:02:01.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, low) -> IRQ 10 [ 2.831930] snd_hda_intel 0000:02:01.0: irq 19 for MSI/MSI-X [ 2.839757] snd_hda_intel 0000:02:01.0: setting latency timer to 64 [ 2.906905] usb 1-2: reset high speed USB device number 2 using ehci_hcd [ 3.071235] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 3.072276] Registered led device: rt2800usb-phy0::radio [ 3.072358] Registered led device: rt2800usb-phy0::assoc [ 3.072435] Registered led device: rt2800usb-phy0::quality [ 3.072778] usbcore: registered new interface driver rt2800usb [ 3.386903] nvidia: module license 'NVIDIA' taints kernel. [ 3.386910] Disabling lock debugging due to kernel taint [ 3.647037] via-rhine 0000:00:12.0: eth0: link down [ 3.647184] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 4.092911] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 4.338363] nvidia 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 4.338378] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 4.339065] NVRM: loading NVIDIA UNIX x86 Kernel Module 290.03 Mon Oct 17 12:31:16 PDT 2011 [ 5.878560] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0001 [ 6.821345] wlan0: authenticate with 00:11:22:33:44:57 (try 1) [ 6.822979] wlan0: authenticated [ 6.871355] wlan0: associate with 00:11:22:33:44:57 (try 1) [ 6.873627] wlan0: RX AssocResp from 00:11:22:33:44:57 (capab=0x411 status=0 aid=1) [ 6.873633] wlan0: associated [ 6.881260] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 7.338248] agpgart-via 0000:00:00.0: AGP 3.5 bridge [ 7.338271] agpgart-via 0000:00:00.0: putting AGP V3 device into 8x mode [ 7.338510] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode [ 8.582257] wlan0: deauthenticating from 00:11:22:33:44:57 by local choice (reason=3) [ 8.602028] cfg80211: Calling CRDA to update world regulatory domain [ 9.352516] ata1.00: configured for UDMA/133 [ 9.352523] ata1: EH complete [ 9.364542] EXT4-fs (sda1): re-mounted. Opts: barrier=1,data=ordered,commit=0 [ 9.438377] EXT4-fs (sda2): re-mounted. Opts: barrier=1,data=ordered,commit=0 [ 9.943046] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 11.260702] wlan0: authenticate with 00:11:22:33:44:57 (try 1) [ 11.262217] wlan0: authenticated [ 11.277581] wlan0: associate with 00:11:22:33:44:57 (try 1) [ 11.279853] wlan0: RX ReassocResp from 00:11:22:33:44:57 (capab=0x411 status=0 aid=1) [ 11.279859] wlan0: associated [ 11.287467] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 33.556683] usb 1-1: new high speed USB device number 4 using ehci_hcd [ 33.682867] scsi4 : usb-storage 1-1:1.0 [ 34.683992] scsi 4:0:0:0: Direct-Access SanDisk Cruzer 7.01 PQ: 0 ANSI: 0 CCS [ 34.690153] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 34.691351] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 35.565370] sd 4:0:0:0: [sdb] 31355391 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 35.566361] sd 4:0:0:0: [sdb] No Caching mode page present [ 35.566365] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 35.568237] sd 4:0:0:0: [sdb] No Caching mode page present [ 35.568240] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 35.569781] sdb: sdb1

ghost commented 12 years ago

root ~/.xbmc/temp # cat xbmc.log 22:31:18 T:3020146496 M:2017636352 NOTICE: ----------------------------------------------------------------------- 22:31:18 T:3020146496 M:2017636352 NOTICE: Starting XBMC, Platform: Linux (OpenELEC - Version: 1.0.2, 3.1.0 i686). Built on Oct 25 2011 (Git:e9e9099) 22:31:18 T:3020146496 M:2017636352 NOTICE: special://xbmc/ is mapped to: /usr/share/xbmc 22:31:18 T:3020146496 M:2017636352 NOTICE: special://xbmcbin/ is mapped to: /usr/lib/xbmc 22:31:18 T:3020146496 M:2017636352 NOTICE: special://masterprofile/ is mapped to: /storage/.xbmc/userdata 22:31:18 T:3020146496 M:2017636352 NOTICE: special://home/ is mapped to: /storage/.xbmc 22:31:18 T:3020146496 M:2017636352 NOTICE: special://temp/ is mapped to: /storage/.xbmc/temp 22:31:18 T:3020146496 M:2017636352 NOTICE: The executable running is: /usr/lib/xbmc/xbmc.bin 22:31:18 T:3020146496 M:2017636352 NOTICE: Log File is located: /storage/.xbmc/temp/xbmc.log 22:31:18 T:3020146496 M:2017636352 NOTICE: ----------------------------------------------------------------------- 22:31:20 T:3020146496 M:2008150016 NOTICE: Setup SDL 22:31:21 T:3020146496 M:2005278720 NOTICE: load settings... 22:31:21 T:3020146496 M:2005082112 NOTICE: special://profile/ is mapped to: special://masterprofile/ 22:31:21 T:3020146496 M:2005082112 NOTICE: loading special://masterprofile/guisettings.xml 22:31:21 T:3020146496 M:2004779008 NOTICE: Getting hardware information now... 22:31:21 T:3020146496 M:2004779008 NOTICE: Checking resolution 12 22:31:21 T:3020146496 M:2004779008 NOTICE: Loading player core factory settings from special://xbmc/system/playercorefactory.xml. 22:31:21 T:3020146496 M:2005004288 NOTICE: Loaded playercorefactory configuration 22:31:21 T:3020146496 M:2005004288 NOTICE: Loading player core factory settings from special://masterprofile/playercorefactory.xml. 22:31:21 T:3020146496 M:2005004288 NOTICE: special://masterprofile/playercorefactory.xml does not exist. Skipping. 22:31:21 T:3020146496 M:2005135360 NOTICE: Loaded advancedsettings.xml from special://profile/advancedsettings.xml 22:31:21 T:3020146496 M:2005135360 NOTICE: Contents of special://profile/advancedsettings.xml are...

true false cputemp gputemp 30

22:31:21 T:3020146496 M:2005135360 NOTICE: Getting hardware information now... 22:31:21 T:3020146496 M:2005135360 NOTICE: Checking resolution 12 22:31:21 T:3020146496 M:2005135360 NOTICE: Default DVD Player: dvdplayer 22:31:21 T:3020146496 M:2005135360 NOTICE: Default Video Player: dvdplayer 22:31:21 T:3020146496 M:2005135360 NOTICE: Default Audio Player: paplayer 22:31:21 T:3020146496 M:2005135360 NOTICE: Loading media sources from special://masterprofile/sources.xml 22:31:21 T:3020146496 M:2000551936 NOTICE: Using visual 0x4e 22:31:21 T:3020146496 M:1998868480 NOTICE: GL_VENDOR = NVIDIA Corporation 22:31:21 T:3020146496 M:1998868480 NOTICE: GL_RENDERER = GeForce 6200/AGP/SSE2 22:31:21 T:3020146496 M:1998868480 NOTICE: GL_VERSION = 2.1.2 NVIDIA 290.03 22:31:21 T:3020146496 M:1998868480 NOTICE: GL_SHADING_LANGUAGE_VERSION = 1.20 NVIDIA via Cg compiler 22:31:21 T:3020146496 M:1998868480 NOTICE: GL_EXTENSIONS = GL_ARB_color_buffer_float GL_ARB_compressed_texture_pixel_storage GL_ARB_conservative_depth GL_ARB_copy_buffer GL_ARB_depth_clamp GL_ARB_depth_texture GL_ARB_draw_buffers GL_ARB_ES2_compatibility GL_ARB_explicit_attrib_location GL_ARB_fragment_program GL_ARB_fragment_program_shadow GL_ARB_fragment_shader GL_ARB_framebuffer_object GL_ARB_get_program_binary GL_ARB_half_float_pixel GL_ARB_half_float_vertex GL_ARB_imaging GL_ARB_internalformat_query GL_ARB_map_buffer_alignment GL_ARB_map_buffer_range GL_ARB_multisample GL_ARB_multitexture GL_ARB_occlusion_query GL_ARB_occlusion_query2 GL_ARB_pixel_buffer_object GL_ARB_point_parameters GL_ARB_point_sprite GL_ARB_provoking_vertex GL_ARB_robustness GL_ARB_sampler_objects GL_ARB_separate_shader_objects GL_ARB_shader_objects GL_ARB_shading_language_100 GL_ARB_shading_language_420pack GL_ARB_shading_language_include GL_ARB_shadow GL_ARB_sync GL_ARB_texture_border_clamp GL_ARB_texture_compression GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3 GL_ARB_texture_float GL_ARB_texture_mirrored_repeat GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle GL_ARB_texture_rg GL_ARB_texture_storage GL_ARB_texture_swizzle GL_ARB_timer_query GL_ARB_transpose_matrix GL_ARB_vertex_array_bgra GL_ARB_vertex_array_object GL_ARB_vertex_buffer_object GL_ARB_vertex_program GL_ARB_vertex_shader GL_ARB_window_pos GL_ATI_draw_buffers GL_ATI_texture_float GL_ATI_texture_mirror_once GL_S3_s3tc GL_EXT_texture_env_add GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_equation_separate GL_EXT_blend_func_separate GL_EXT_blend_minmax GL_EXT_blend_subtract GL_EXT_compiled_vertex_array GL_EXT_Cg_shader GL_EXT_depth_bounds_test GL_EXT_direct_state_access GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_framebuffer_blit GL_EXT_framebuffer_multisample GL_EXT_framebuffer_object GL_EXT_gpu_program_parameters GL_EXT_multi_draw_arrays GL_EXT_packed_depth_stencil GL_EXT_packed_pixels GL_EXT_pixel_buffer_object GL_EXT_point_parameters GL_EXT_provoking_vertex GL_EXT_rescale_normal GL_EXT_secondary_color GL_EXT_separate_shader_objects GL_EXT_separate_specular_color GL_EXT_shadow_funcs GL_EXT_stencil_two_side GL_EXT_stencil_wrap GL_EXT_texture3D GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_s3tc GL_EXT_texture_cube_map GL_EXT_texture_edge_clamp GL_EXT_texture_env_combine GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic GL_EXT_texture_format_BGRA8888 GL_EXT_texture_lod GL_EXT_texture_lod_bias GL_EXT_texture_mirror_clamp GL_EXT_texture_object GL_EXT_texture_sRGB GL_EXT_texture_sRGB_decode GL_EXT_texture_storage GL_EXT_texture_swizzle GL_EXT_timer_query GL_EXT_vertex_array GL_EXT_vertex_array_bgra GL_EXT_x11_sync_object GL_EXT_import_sync_object GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat GL_KTX_buffer_region GL_NV_alpha_test GL_NV_blend_minmax GL_NV_blend_square GL_NV_complex_primitives GL_NV_copy_depth_to_color GL_NV_depth_clamp GL_NV_fbo_color_attachments GL_NV_fence GL_NV_float_buffer GL_NV_fog_distance GL_NV_fragdepth GL_NV_fragment_program GL_NV_fragment_program_option GL_NV_fragment_program2 GL_NV_framebuffer_multisample_coverage GL_NV_half_float GL_NV_light_max_exponent GL_NV_multisample_filter_hint GL_NV_occlusion_query GL_NV_packed_depth_stencil GL_NV_pixel_data_range GL_NV_point_sprite GL_NV_primitive_restart GL_NV_register_combiners GL_NV_register_combiners2 GL_NV_texgen_reflection GL_NV_texture_barrier GL_NV_texture_compression_vtc GL_NV_texture_env_combine4 GL_NV_texture_expand_normal GL_NV_texture_lod_clamp GL_NV_texture_rectangle GL_NV_texture_shader GL_NV_texture_shader2 GL_NV_texture_shader3 GL_NV_vertex_array_range GL_NV_vertex_array_range2 GL_NV_vertex_program GL_NV_vertex_program1_1 GL_NV_vertex_program2 GL_NV_vertex_program2_option GL_NV_vertex_program3 GL_NVX_conditional_render GL_OES_depth24 GL_OES_depth32 GL_OES_depth_texture GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_get_program_binary GL_OES_mapbuffer GL_OES_packed_depth_stencil GL_OES_rgb8_rgba8 GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_float_linear GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_array_object GL_OES_vertex_half_float GL_SGIS_generate_mipmap GL_SGIS_texture_lod GL_SGIX_depth_texture GL_SGIX_shadow GL_SUN_slice_accum 22:31:21 T:3020146496 M:1998868480 ERROR: GLX: Same window as before, refreshing context 22:31:21 T:3020146496 M:1998868480 ERROR: Texture manager unable to load file: special://xbmc/media/Splash.png 22:31:21 T:3020146496 M:1998938112 ERROR: Remote Translator: Can't find button eject 22:31:22 T:3020146496 M:1999003648 NOTICE: UDisks: Added /media/OPENELEC 22:31:22 T:3020146496 M:1999003648 NOTICE: UDisks: Added /flash 22:31:22 T:3020146496 M:1999003648 NOTICE: UDisks: Added /storage 22:31:22 T:3020146496 M:1999003648 NOTICE: start dvd mediatype detection 22:31:22 T:3020146496 M:1999003648 NOTICE: initializing playlistplayer 22:31:22 T:3020146496 M:1999003648 NOTICE: DONE initializing playlistplayer 22:31:22 T:3020146496 M:1991897088 NOTICE: initialize done 22:31:22 T:3020146496 M:1991897088 NOTICE: Running the application... 22:31:22 T:3020146496 M:1991897088 NOTICE: ES: Starting event server 22:31:22 T:3020146496 M:1991897088 NOTICE: DS: Starting dbus server 22:31:22 T:2995252080 M:1991753728 NOTICE: ES: Starting UDP Event server on 127.0.0.1:9777 22:31:22 T:2995252080 M:1991626752 NOTICE: UDP: Listening on port 9777 22:31:22 T:3020146496 M:1991499776 ERROR: DS: Failed to connect to the D-Bus session daemon: Empty address '' 22:31:22 T:3020146496 M:1991499776 NOTICE: starting zeroconf publishing 22:31:22 T:2958900080 M:1986695168 WARNING: FillBuffer: curl failed with code 6 22:31:22 T:2958900080 M:1986695168 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream. 22:31:22 T:2958900080 M:1986695168 ERROR: WEATHER: Weather download failed! 22:31:23 T:2928003952 M:1975353344 WARNING: FillBuffer: curl failed with code 6 22:31:23 T:2928003952 M:1975353344 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream. 22:31:23 T:2958900080 M:1975353344 WARNING: FillBuffer: curl failed with code 6 22:31:23 T:2958900080 M:1975353344 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream. 22:31:23 T:2958900080 M:1975353344 ERROR: Open - failed to open source http://mirrors.xbmc.org/addons/dharma/addons.xml.md5 22:31:23 T:2970073968 M:1975353344 WARNING: FillBuffer: curl failed with code 6 22:31:23 T:2970073968 M:1975353344 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream. 22:31:23 T:2970073968 M:1975353344 ERROR: Open - failed to open source http://addons.openelec.tv/1.0/Generic/i386/addons.xml.md5 22:31:23 T:2928003952 M:1975345152 WARNING: FillBuffer: curl failed with code 6 22:31:23 T:2928003952 M:1975345152 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream. 22:31:23 T:2958900080 M:1975345152 WARNING: FillBuffer: curl failed with code 6 22:31:23 T:2958900080 M:1975345152 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream. 22:31:23 T:2958900080 M:1975345152 ERROR: Open - failed to open source http://mirrors.xbmc.org/addons/dharma/addons.xml|Encoding=gzip 22:31:23 T:2958900080 M:1975345152 ERROR: Repository XBMC.org Add-ons returned no add-ons, listing may have failed 22:31:23 T:2970073968 M:1975345152 WARNING: FillBuffer: curl failed with code 6 22:31:23 T:2970073968 M:1975345152 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream. 22:31:23 T:2970073968 M:1975345152 ERROR: Open - failed to open source http://addons.openelec.tv/1.0/Generic/i386/addons.xml 22:31:23 T:2970073968 M:1975345152 ERROR: Repository OpenELEC.tv Mediacenter OS Add-ons returned no add-ons, listing may have failed 22:31:23 T:2928003952 M:1975345152 WARNING: FillBuffer: curl failed with code 6 22:31:23 T:2928003952 M:1975345152 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream. 22:31:23 T:2928003952 M:1993277440 WARNING: FillBuffer: curl failed with code 6 22:31:23 T:2928003952 M:1993277440 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream. 22:31:23 T:2928003952 M:1993285632 WARNING: FillBuffer: curl failed with code 6 22:31:23 T:2928003952 M:1993285632 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream. 22:31:23 T:3020146496 M:1993285632 ERROR: XLCDproc::Connect - Unable to connect to host. 22:31:23 T:3020146496 M:1993285632 ERROR: XLCDproc::Initialize - Connect failed. Retry in 4 seconds. 22:31:23 T:2928003952 M:1993285632 WARNING: FillBuffer: curl failed with code 6 22:31:23 T:2928003952 M:1993285632 ERROR: CFileCurl::CReadState::Open, didn't get any data from stream. 22:31:27 T:3020146496 M:1993453568 ERROR: XLCDproc::Connect - Unable to connect to host. 22:31:27 T:3020146496 M:1993453568 ERROR: XLCDproc::Initialize - Connect failed. Retry in 8 seconds. 22:31:35 T:3020146496 M:1991458816 ERROR: XLCDproc::Connect - Unable to connect to host. 22:31:35 T:3020146496 M:1991458816 ERROR: XLCDproc::Initialize - Connect failed. Retry in 16 seconds. 22:31:51 T:3020146496 M:1991286784 ERROR: XLCDproc::Connect - Unable to connect to host. 22:31:51 T:3020146496 M:1991286784 ERROR: XLCDproc::Initialize - Connect failed. Retry in 32 seconds. 22:32:24 T:3020146496 M:1991196672 ERROR: XLCDproc::Connect - Unable to connect to host. 22:32:24 T:3020146496 M:1991196672 ERROR: XLCDproc::Initialize - Connect failed. Retry in 64 seconds. 02:33:15 T:3020146496 M:1990823936 ERROR: XLCDproc::Connect - Unable to connect to host. 02:33:15 T:3020146496 M:1990823936 ERROR: XLCDproc::Initialize - Connect failed. Giving up. 02:34:25 T:2907691888 M:1987051520 NOTICE: -->Python Interpreter Initialized<-- 02:34:26 T:2958900080 M:1983602688 NOTICE: -->Python Interpreter Initialized<-- 02:34:38 T:2890906480 M:1978445824 NOTICE: -->Python Interpreter Initialized<-- 02:34:41 T:2890906480 M:1978363904 NOTICE: -->Python Interpreter Initialized<-- 02:34:41 T:3020146496 M:1977094144 NOTICE: DVDPlayer: Opening: http://videos.revision3.com/revision3/web/tekzilla/0303/tekzilla--0303--ipad-3-details--hd720p30.h264.mp4 02:34:41 T:3020146496 M:1977094144 WARNING: CDVDMessageQueue(player)::Put MSGQ_NOT_INITIALIZED 02:34:41 T:2958900080 M:1977094144 NOTICE: Creating InputStream 02:34:41 T:2958900080 M:1977094144 NOTICE: Creating Demuxer 02:34:44 T:2958900080 M:1950388224 NOTICE: Opening video stream: 0 source: 256 02:34:44 T:2958900080 M:1950388224 NOTICE: Creating video codec with codec id: 28 02:34:44 T:2958900080 M:1950576640 NOTICE: CDVDVideoCodecFFmpeg::Open() Creating VDPAU(1280x720, 28) 02:34:44 T:2958900080 M:1949904896 NOTICE: vdp_device = 0x00000001 vdp_st = 0x00000001 02:34:44 T:2958900080 M:1949904896 ERROR: (VDPAU) unable to init VDPAU - vdp_st = 0x1. Falling back. 02:34:44 T:2958900080 M:1949904896 NOTICE: CDVDVideoCodecFFmpeg::Open() Failed to get VDPAU device 02:34:44 T:2958900080 M:1949904896 NOTICE: (VDPAU) Close 02:34:44 T:2958900080 M:1949904896 NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 02:34:44 T:2958900080 M:1949904896 NOTICE: Creating video thread 02:34:44 T:2958900080 M:1949904896 NOTICE: Opening audio stream: 1 source: 256 02:34:44 T:2958900080 M:1949904896 NOTICE: Finding audio codec for: 86018 02:34:44 T:2958900080 M:1949368320 NOTICE: Creating audio thread 02:34:44 T:2958900080 M:1949368320 WARNING: CDVDPlayer::CheckContinuity - wrapback of stream:2, prev:100100.000000, curr:33366.666667, diff:-66733.333333 02:34:44 T:2836769648 M:1949380608 NOTICE: running thread: CDVDPlayerAudio::Process() 02:34:44 T:2836769648 M:1948368896 NOTICE: Creating audio device with codec id: 86018, channels: 2, sample rate: 48000, no pass-through 02:34:44 T:2845162352 M:1944961024 NOTICE: running thread: video_thread 02:34:44 T:2845162352 M:1944961024 ERROR: VAAPI - unable to initialize display -1 - unknown libva error 02:34:44 T:2845162352 M:1941151744 NOTICE: fps: 29.970030, pwidth: 1280, pheight: 720, dwidth: 1280, dheight: 720 02:34:44 T:2845162352 M:1941151744 NOTICE: Display resolution DESKTOP : 1920x1080 @ 60.00 - Full Screen (12)

ghost commented 12 years ago

Humm, a problem with xbmc it seems.. missing libva? i'm fairly new here but i'm sure i've seen this somewhere...

ghost commented 12 years ago

ok, yes it was in the program addons, tried to install it but it did not help... ok i get it, VAAPI: Video Acceleration API, seems that my video card is not supported after all

ghost commented 12 years ago

ok turning off VAAPI in video settings... then i get this:

03:03:33 T:2917198704 M:1960742912 ERROR: (VDPAU) unable to init VDPAU - vdp_st = 0x1. Falling back. 03:03:33 T:2917198704 M:1960742912 NOTICE: CDVDVideoCodecFFmpeg::Open() Failed to get VDPAU device

ok, turned VDPAU off, it removed the error about the display but xbmc is still frozen.. now i'm lost...

ghost commented 12 years ago

Ok, i found the debug option in system settings...

03:31:44 T:2888768368 M:1966985216 NOTICE: CDVDVideoCodecFFmpeg::Open() Using codec: H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10 03:31:44 T:2888768368 M:1966731264 DEBUG: FactoryCodec - Video: ff-h264 - Opened 03:31:44 T:2888768368 M:1966731264 NOTICE: Creating video thread 03:31:44 T:2888768368 M:1966690304 NOTICE: Opening audio stream: 1 source: 256 03:31:44 T:2888768368 M:1966690304 NOTICE: Finding audio codec for: 86018 03:31:44 T:2888768368 M:1966309376 DEBUG: FactoryCodec - Audio: FFmpeg - Opening 03:31:44 T:2844937072 M:1965928448 DEBUG: thread start, auto delete: 0 03:31:44 T:2888768368 M:1965928448 DEBUG: FactoryCodec - Audio: FFmpeg - Opened 03:31:44 T:2888768368 M:1965928448 NOTICE: Creating audio thread 03:31:44 T:2888768368 M:1965928448 DEBUG: CDVDPlayer::SetCaching - caching state 2 03:31:44 T:2888768368 M:1965928448 WARNING: CDVDPlayer::CheckContinuity - wrapback of stream:2, prev:100100.000000, curr:33366.666667, diff:-66733.333333 03:31:44 T:2844937072 M:1965928448 DEBUG: LinuxRendererGL: Cleaning up GL resources 03:31:44 T:2844937072 M:1965928448 NOTICE: running thread: video_thread 03:31:44 T:2844937072 M:1965928448 DEBUG: CDVDPlayerVideo - CDVDMsg::GENERAL_SYNCHRONIZE 03:31:44 T:2844937072 M:1965928448 DEBUG: CDVDPlayerVideo - CDVDMsg::GENERALRESYNC(0.000000, 1) 03:31:44 T:2836544368 M:1963769856 DEBUG: thread start, auto delete: 0 03:31:44 T:2836544368 M:1963769856 NOTICE: running thread: CDVDPlayerAudio::Process() 03:31:44 T:2836544368 M:1963769856 NOTICE: Creating audio device with codec id: 86018, channels: 2, sample rate: 48000, no pass-through 03:31:44 T:2836544368 M:1963769856 INFO: AudioRendererFactory: not a explicit device, trying to autodetect. 03:31:44 T:2836544368 M:1963642880 INFO: CPCMRemap: Configured speaker layout: 2.0 03:31:44 T:2836544368 M:1963642880 INFO: CPCMRemap: I channel map: FL,FR 03:31:44 T:2836544368 M:1963642880 INFO: CPCMRemap: O channel map: FL,FR 03:31:44 T:2836544368 M:1963642880 DEBUG: CPCMRemap: Downmix normalization is disabled 03:31:44 T:2836544368 M:1963642880 DEBUG: CPCMRemap: FL = FL(1.000000) 03:31:44 T:2836544368 M:1963642880 DEBUG: CPCMRemap: FR = FR(1.000000_) 03:31:44 T:2836544368 M:1963642880 DEBUG: RemoveActiveDevice - Removing device 1 03:31:44 T:3020990272 M:1963642880 DEBUG: CGUIAudioManager::DeInitialize 03:31:44 T:2844937072 M:1961611264 NOTICE: fps: 29.970030, pwidth: 1280, pheight: 720, dwidth: 1280, dheight: 720 03:31:44 T:2844937072 M:1961611264 DEBUG: OutputPicture - change configuration. 1280x720. framerate: 29.97. format: YV12 03:31:44 T:2844937072 M:1961611264 NOTICE: Display resolution DESKTOP : 1920x1080 @ 60.00 - Full Screen (12) 03:31:44 T:2888768368 M:1961611264 DEBUG: CDVDPlayer::HandleMessages - player started 2 03:32:06 T:2905553776 M:1954242560 DEBUG: Thread 2905553776 terminating (autodelete) 03:32:08 T:2937486192 M:1954246656 DEBUG: Thread 2937486192 terminating (autodelete) 03:32:08 T:2970782576 M:1954246656 DEBUG: Thread 2970782576 terminating (autodelete) 03:32:09 T:2959608688 M:1954271232 DEBUG: Thread 2959608688 terminating (autodelete)

sraue commented 12 years ago

can you please try if possible with a new development build from: http://sources.openelec.tv/tmp/image/openelec-eden/

there are much improvenments which will not be backported to dharma anymore. you can install on a USB stick for testing

ghost commented 12 years ago

ok, got the latest devel build... same problem, xbmc freeze when i try to play a file, but then again, the same thing appen when i try to reboot or shutdown from xbmc...

mrdominuzq commented 12 years ago

have you tried on another pc ?

newphreak commented 12 years ago

How is this in beta1? and what video accelerators do you use? Disable all but VDPAU.

ghost commented 12 years ago

sorry, but as it turns out, there was something physically wrong with that pc.. not sure if that was the cause of the bug, but i dont see any reason to keep this bug open unless someone else is experiencing this...

newphreak commented 12 years ago

Closed for now then. :)