Network issues OE 8.0.0

[maxonly1]

Good to see that the usb drive bug is noted. I experienced it too. I also have some other problems that other members seem to have. For some reason I couldn't connect to my wifi network. It gave me an input/output error or sometimes it couldn't find my network at all. A wired connection worked, but when i tried to access the samba share it asked for a username and password.

I was using a Raspberry Pi 2b with Openelec 8.0.0 (manually updated from 7.0.1), but had to revert back to 7.0.1. Wifi adapter: TP-LINK TL-WN725N

[sraue]

can you post the logile zip you find in logfiles samba share?

[maxonly1]

I'm sorry. I probably can't since I downgraded to 7.0.1. Or does the logfile stay in that folder after downgrading?

Max

Op 14 apr. 2017 13:35 schreef Stephan Raue notifications@github.com:

can you post the logile zip you find in logfiles samba share?

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHubhttps://github.com/OpenELEC/OpenELEC.tv/issues/5028#issuecomment-294139739, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AaAoYH2-3bGegIbKnH37E22eYT4C7gu7ks5rv1oegaJpZM4M5vSh.

[maxonly1]

I checked the folder. For some reason it didn't create a logfile that day.

[DeanCording]

Experiencing wifi connection problems with Openelec 8.0.0 & 8.0.1 as well. Worked ok with 7.0.1

Raspberry Pi 2b NetGear, Inc. WNA1000M 802.11bgn [Realtek RTL8188CUS] wifi dongle

Also experience problem with Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS] wifi dongle

Wifi connectivity is intermittent - occasionally it works fine but mostly it fails to associate or even detect WLANs.

log-2017-04-11-19.37.50.zip

[ 10.349058] usbcore: registered new interface driver rtl8xxxu [ 10.440818] usbcore: registered new interface driver rtl8192cu [ 10.653201] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 10.863034] 8021q: 802.1Q VLAN Support v1.8 [ 11.059122] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 12.316727] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 925.950642] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2880.035575] usb 1-1.4.4: USB disconnect, device number 9 [ 2880.138807] usb 1-1.4.4: rtl8xxxu_active_to_lps: RX poll timed out (0x05f8) [ 2880.145372] usb 1-1.4.4: rtl8xxxu_active_to_emu: Disabling MAC timed out [ 2880.145415] usb 1-1.4.4: disconnecting [ 2886.644333] usb 1-1.4.4: new high-speed USB device number 10 using dwc_otg [ 2886.739482] usb 1-1.4.4: New USB device found, idVendor=0846, idProduct=9041 [ 2886.739527] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2886.739539] usb 1-1.4.4: Product: 802.11n WLAN Adapter [ 2886.739549] usb 1-1.4.4: Manufacturer: Realtek [ 2886.739560] usb 1-1.4.4: SerialNumber: 00e04c000001 [ 2886.741103] usb 1-1.4.4: This Realtek USB WiFi dongle (0x0846:0x9041) is untested! [ 2886.741120] usb 1-1.4.4: Please report results to Jes.Sorensen@gmail.com [ 2886.919454] usb 1-1.4.4: Vendor: Realtek [ 2886.919468] usb 1-1.4.4: Product: 802.11n WLAN Adapter [ 2886.919477] usb 1-1.4.4: rtl8192cu_parse_efuse: dumping efuse (0x80 bytes): [ 2886.919485] usb 1-1.4.4: 00: 29 81 00 74 cd 00 00 00 [ 2886.919493] usb 1-1.4.4: 08: ff 00 46 08 41 90 03 41 [ 2886.919515] usb 1-1.4.4: 10: 32 00 85 62 1e ad c4 3d [ 2886.919523] usb 1-1.4.4: 18: c7 78 3a 03 0a 03 52 65 [ 2886.919530] usb 1-1.4.4: 20: 61 6c 74 65 6b 00 16 03 [ 2886.919539] usb 1-1.4.4: 28: 38 30 32 2e 31 31 6e 20 [ 2886.919545] usb 1-1.4.4: 30: 57 4c 41 4e 20 41 64 61 [ 2886.919553] usb 1-1.4.4: 38: 70 74 65 72 00 00 00 00 [ 2886.919560] usb 1-1.4.4: 40: 00 00 00 00 00 00 00 00 [ 2886.919567] usb 1-1.4.4: 48: 00 00 00 00 00 00 00 00 [ 2886.919574] usb 1-1.4.4: 50: 00 00 00 00 00 00 00 00 [ 2886.919582] usb 1-1.4.4: 58: 06 00 20 20 20 00 00 00 [ 2886.919589] usb 1-1.4.4: 60: 23 23 23 00 00 00 00 00 [ 2886.919596] usb 1-1.4.4: 68: 00 00 00 01 05 05 05 04 [ 2886.919602] usb 1-1.4.4: 70: 04 00 04 04 00 02 b7 00 [ 2886.919609] usb 1-1.4.4: 78: 0f 03 00 00 36 00 00 00 [ 2886.919623] usb 1-1.4.4: RTL8188CU rev A (TSMC) 1T1R, TX queues 2, WiFi=1, BT=0, GPS=0, HI PA=0 [ 2886.919631] usb 1-1.4.4: RTL8188CU MAC: c4:3d:c7:78:3a:03 [ 2886.919639] usb 1-1.4.4: rtl8xxxu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 2886.919915] usb 1-1.4.4: Firmware revision 80.0 (signature 0x88c1) [ 2887.437111] usb 1-1.4.4: rtl8xxxu_iqk_path_a: Path A RX IQK failed! [ 2887.478966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2909.070333] wlan0: authenticate with 00:12:01:aa:b6:42 [ 2909.084868] wlan0: send auth to 00:12:01:aa:b6:42 (try 1/3) [ 2909.287674] wlan0: send auth to 00:12:01:aa:b6:42 (try 2/3) [ 2909.490997] wlan0: send auth to 00:12:01:aa:b6:42 (try 3/3) [ 2909.694299] wlan0: authentication with 00:12:01:aa:b6:42 timed out

[DeanCording]

Workaround is to blacklist rtl8xxxu module

echo "blacklist rtl8xxxu" >  /storage/.config/modprobe.d/rtl8xxxu.conf

Refer http://openelec.tv/forum/124-raspberry-pi/83480-rpi2-openelec-8-0-wifi-problems