search

OpenELEC / OpenELEC.tv

OpenELEC - The living room PC for everyone
http://openelec.tv
1.6k stars 887 forks source link

WLAN issue Realtek R8712U (solved Kernel 3.2.15 ?) #552

Closed policenauts closed 11 years ago

policenauts commented 12 years ago

According to emails with Larry Finger, It should be a problem of the past, unfortunately Wlan still not work in 1.95.3. When sometime it seem there is values in XBMC network settings, my IP adress never have the same root as I expected to (with DHCP 192.168.0.xxx). what info can I give to solve this problem ?

sraue commented 12 years ago

paste/attach: /var/log/messages and output of dmesg and lsmod

policenauts commented 12 years ago

dmesg: [ 0.499338] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.499342] pci 0000:00:02.0: reg 20: [io 0xff00-0xff3f] [ 0.499386] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 0.499406] pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit] [ 0.499476] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.499479] pci 0000:00:16.0: PME# disabled [ 0.499506] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 0.499525] pci 0000:00:1a.0: reg 10: [mem 0xfbffe000-0xfbffe3ff] [ 0.499609] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.499613] pci 0000:00:1a.0: PME# disabled [ 0.499633] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 0.499646] pci 0000:00:1b.0: reg 10: [mem 0xfbff8000-0xfbffbfff 64bit] [ 0.499709] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.499711] pci 0000:00:1b.0: PME# disabled [ 0.499728] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 0.499801] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.499804] pci 0000:00:1c.0: PME# disabled [ 0.499827] pci 0000:00:1c.6: [8086:1c1c] type 1 class 0x000604 [ 0.499900] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.499903] pci 0000:00:1c.6: PME# disabled [ 0.499926] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 0.499945] pci 0000:00:1d.0: reg 10: [mem 0xfbffd000-0xfbffd3ff] [ 0.500029] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.500033] pci 0000:00:1d.0: PME# disabled [ 0.500048] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.500105] pci 0000:00:1f.0: [8086:1c4a] type 0 class 0x000601 [ 0.500218] pci 0000:00:1f.2: [8086:1c00] type 0 class 0x000101 [ 0.500231] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07] [ 0.500237] pci 0000:00:1f.2: reg 14: [io 0xfd00-0xfd03] [ 0.500244] pci 0000:00:1f.2: reg 18: [io 0xfc00-0xfc07] [ 0.500251] pci 0000:00:1f.2: reg 1c: [io 0xfb00-0xfb03] [ 0.500257] pci 0000:00:1f.2: reg 20: [io 0xfa00-0xfa0f] [ 0.500264] pci 0000:00:1f.2: reg 24: [io 0xf900-0xf90f] [ 0.500304] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 0.500317] pci 0000:00:1f.3: reg 10: [mem 0xfbffc000-0xfbffc0ff 64bit] [ 0.500336] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f] [ 0.500365] pci 0000:00:1f.5: [8086:1c08] type 0 class 0x000101 [ 0.500378] pci 0000:00:1f.5: reg 10: [io 0xf700-0xf707] [ 0.500384] pci 0000:00:1f.5: reg 14: [io 0xf600-0xf603] [ 0.500391] pci 0000:00:1f.5: reg 18: [io 0xf500-0xf507] [ 0.500398] pci 0000:00:1f.5: reg 1c: [io 0xf400-0xf403] [ 0.500405] pci 0000:00:1f.5: reg 20: [io 0xf300-0xf30f] [ 0.500411] pci 0000:00:1f.5: reg 24: [io 0xf200-0xf20f] [ 0.500488] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.500556] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.500574] pci 0000:02:00.0: reg 10: [io 0xee00-0xeeff] [ 0.500607] pci 0000:02:00.0: reg 18: [mem 0xfbeff000-0xfbefffff 64bit pref] [ 0.500627] pci 0000:02:00.0: reg 20: [mem 0xfbef8000-0xfbefbfff 64bit pref] [ 0.500716] pci 0000:02:00.0: supports D1 D2 [ 0.500717] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.500721] pci 0000:02:00.0: PME# disabled [ 0.504752] pci 0000:00:1c.6: PCI bridge to [bus 02-02] [ 0.504759] pci 0000:00:1c.6: bridge window [io 0xe000-0xefff] [ 0.504769] pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.504857] pci 0000:00:1e.0: PCI bridge to [bus 03-03](subtractive decode) [ 0.504866] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7](subtractive decode) [ 0.504868] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff](subtractive decode) [ 0.504869] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff](subtractive decode) [ 0.504870] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff](subtractive decode) [ 0.504872] pci 0000:00:1e.0: bridge window [mem 0xdfa00000-0xfebfffff](subtractive decode) [ 0.504886] pci_bus 0000:00: on NUMA node 0 [ 0.504890] ACPI: PCI Interrupt Routing Table [SB.PCI0._PRT] [ 0.504968] ACPI: PCI Interrupt Routing Table [SB.PCI0.PEX0._PRT] [ 0.504988] ACPI: PCI Interrupt Routing Table [SB.PCI0.PEX6._PRT] [ 0.505015] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.505017] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.505018] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.508087] ACPI: PCI Interrupt Link [LNKA](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.508113] ACPI: PCI Interrupt Link [LNKB](IRQs 3 4 5 6 7 9 10 11 12 14 15) 0, disabled. [ 0.508137] ACPI: PCI Interrupt Link [LNKC](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.508166] ACPI: PCI Interrupt Link [LNKD](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.508192] ACPI: PCI Interrupt Link [LNKE](IRQs 3 4 5 6 7 9 10 11 12 14 15) 0, disabled. [ 0.508216] ACPI: PCI Interrupt Link [LNKF](IRQs 3 4 5 6 7 9 10 11 12 14 15) 0, disabled. [ 0.508240] ACPI: PCI Interrupt Link [LNK0](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.508264] ACPI: PCI Interrupt Link [LNK1](IRQs 3 4 5 6 7 9 10 11 12 14 15) [ 0.508308] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.508311] vgaarb: loaded [ 0.508312] vgaarb: bridge control possible 0000:00:02.0 [ 0.508348] SCSI subsystem initialized [ 0.508372] libata version 3.00 loaded. [ 0.508392] usbcore: registered new interface driver usbfs [ 0.508398] usbcore: registered new interface driver hub [ 0.508409] usbcore: registered new device driver usb [ 0.508429] PCI: Using ACPI for IRQ routing [ 0.509893] PCI: pci_cache_line_size set to 64 bytes [ 0.509930] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.509931] reserve RAM buffer: 00000000dafe0000 - 00000000dbffffff [ 0.509933] reserve RAM buffer: 000000011fe00000 - 000000011fffffff [ 0.510015] cfg80211: Calling CRDA to update world regulatory domain [ 0.510112] Switching to clocksource hpet [ 0.510141] pnp: PnP ACPI init [ 0.510146] ACPI: bus type pnp registered [ 0.510187] pnp 00:00: [bus 00-3f] [ 0.510188] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.510190] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.510191] pnp 00:00: [io 0x0d00-0xffff window] [ 0.510192] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.510194] pnp 00:00: [mem 0x000c0000-0x000dffff window] [ 0.510195] pnp 00:00: [mem 0xdfa00000-0xfebfffff window] [ 0.510215] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.510257] pnp 00:01: [io 0x0010-0x001f] [ 0.510258] pnp 00:01: [io 0x0022-0x003f] [ 0.510259] pnp 00:01: [io 0x0044-0x005f] [ 0.510260] pnp 00:01: [io 0x0062-0x0063] [ 0.510261] pnp 00:01: [io 0x0065-0x006f] [ 0.510262] pnp 00:01: [io 0x0074-0x007f] [ 0.510263] pnp 00:01: [io 0x0091-0x0093] [ 0.510264] pnp 00:01: [io 0x00a2-0x00bf] [ 0.510265] pnp 00:01: [io 0x00e0-0x00ef] [ 0.510266] pnp 00:01: [io 0x04d0-0x04d1] [ 0.510267] pnp 00:01: [io 0x0290-0x029f] [ 0.510268] pnp 00:01: [io 0x0800-0x087f] [ 0.510269] pnp 00:01: [io 0x0290-0x0294] [ 0.510270] pnp 00:01: [io 0x0880-0x088f] [ 0.510291] system 00:01: [io 0x04d0-0x04d1] has been reserved [ 0.510293] system 00:01: [io 0x0290-0x029f] has been reserved [ 0.510294] system 00:01: [io 0x0800-0x087f] has been reserved [ 0.510296] system 00:01: [io 0x0290-0x0294] has been reserved [ 0.510297] system 00:01: [io 0x0880-0x088f] has been reserved [ 0.510299] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.510305] pnp 00:02: [dma 4] [ 0.510306] pnp 00:02: [io 0x0000-0x000f] [ 0.510307] pnp 00:02: [io 0x0080-0x0090] [ 0.510308] pnp 00:02: [io 0x0094-0x009f] [ 0.510310] pnp 00:02: [io 0x00c0-0x00df] [ 0.510322] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.510347] pnp 00:03: [irq 0 disabled] [ 0.510353] pnp 00:03: [irq 8] [ 0.510354] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.510367] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.510380] pnp 00:04: [io 0x0070-0x0073] [ 0.510392] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.510396] pnp 00:05: [io 0x0061] [ 0.510408] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.510413] pnp 00:06: [io 0x00f0-0x00ff] [ 0.510416] pnp 00:06: [irq 13] [ 0.510428] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.510496] pnp 00:07: [io 0x03f0-0x03f5] [ 0.510497] pnp 00:07: [io 0x03f7] [ 0.510500] pnp 00:07: [irq 6] [ 0.510501] pnp 00:07: [dma 2] [ 0.510522] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.510622] pnp 00:08: [io 0x03f8-0x03ff] [ 0.510626] pnp 00:08: [irq 4] [ 0.510655] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.510760] pnp 00:09: [io 0x0378-0x037f] [ 0.510764] pnp 00:09: [irq 7] [ 0.510788] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.510838] pnp 00:0a: [io 0x0060] [ 0.510839] pnp 00:0a: [io 0x0064] [ 0.510842] pnp 00:0a: [irq 1] [ 0.510856] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.510871] pnp 00:0b: [io 0x0400-0x04cf] [ 0.510872] pnp 00:0b: [io 0x04d2-0x04ff] [ 0.510890] system 00:0b: [io 0x0400-0x04cf] has been reserved [ 0.510891] system 00:0b: [io 0x04d2-0x04ff] has been reserved [ 0.510893] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.510899] pnp 00:0c: [io 0x1000-0x107f] [ 0.510900] pnp 00:0c: [io 0x1080-0x10ff] [ 0.510901] pnp 00:0c: [io 0x1100-0x117f] [ 0.510902] pnp 00:0c: [io 0x1180-0x11ff] [ 0.510920] system 00:0c: [io 0x1000-0x107f] has been reserved [ 0.510922] system 00:0c: [io 0x1080-0x10ff] has been reserved [ 0.510923] system 00:0c: [io 0x1100-0x117f] has been reserved [ 0.510925] system 00:0c: [io 0x1180-0x11ff] has been reserved [ 0.510926] system 00:0c: Plug and Play ACPI device, IDs ICD0001 PNP0c02 (active) [ 0.511017] pnp 00:0d: [io 0x0454-0x0457] [ 0.511039] system 00:0d: [io 0x0454-0x0457] has been reserved [ 0.511041] system 00:0d: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.511050] pnp 00:0e: [mem 0xf4000000-0xf7ffffff] [ 0.511072] system 00:0e: [mem 0xf4000000-0xf7ffffff] has been reserved [ 0.511074] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.511159] pnp 00:0f: [mem 0x000cd800-0x000cffff] [ 0.511160] pnp 00:0f: [mem 0x000f0000-0x000f7fff] [ 0.511161] pnp 00:0f: [mem 0x000f8000-0x000fbfff] [ 0.511162] pnp 00:0f: [mem 0x000fc000-0x000fffff] [ 0.511164] pnp 00:0f: [mem 0xdafe0000-0xdafeffff] [ 0.511165] pnp 00:0f: [mem 0x00000000-0x0009ffff] [ 0.511166] pnp 00:0f: [mem 0x00100000-0xdafdffff] [ 0.511167] pnp 00:0f: [mem 0xdaff0000-0xdaffffff] [ 0.511168] pnp 00:0f: [mem 0xfec00000-0xfec00fff] [ 0.511169] pnp 00:0f: [mem 0xfed10000-0xfed1dfff] [ 0.511170] pnp 00:0f: [mem 0xfed20000-0xfed8ffff] [ 0.511171] pnp 00:0f: [mem 0xfee00000-0xfee00fff] [ 0.511172] pnp 00:0f: [mem 0xffb00000-0xffb7ffff] [ 0.511173] pnp 00:0f: [mem 0xfff00000-0xffffffff] [ 0.511175] pnp 00:0f: [mem 0x000e0000-0x000effff] [ 0.511176] pnp 00:0f: [mem 0x20000000-0x201fffff] [ 0.511177] pnp 00:0f: [mem 0x40000000-0x400fffff] [ 0.511179] pnp 00:0f: [mem 0xdb000000-0xdf9fffff] [ 0.511205] system 00:0f: [mem 0x000cd800-0x000cffff] has been reserved [ 0.511207] system 00:0f: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.511208] system 00:0f: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.511209] system 00:0f: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.511211] system 00:0f: [mem 0xdafe0000-0xdafeffff] could not be reserved [ 0.511212] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.511214] system 00:0f: [mem 0x00100000-0xdafdffff] could not be reserved [ 0.511215] system 00:0f: [mem 0xdaff0000-0xdaffffff] has been reserved [ 0.511217] system 00:0f: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.511218] system 00:0f: [mem 0xfed10000-0xfed1dfff] has been reserved [ 0.511220] system 00:0f: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.511221] system 00:0f: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.511223] system 00:0f: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.511224] system 00:0f: [mem 0xfff00000-0xffffffff] has been reserved [ 0.511226] system 00:0f: [mem 0x000e0000-0x000effff] has been reserved [ 0.511227] system 00:0f: [mem 0x20000000-0x201fffff] could not be reserved [ 0.511228] system 00:0f: [mem 0x40000000-0x400fffff] could not be reserved [ 0.511230] system 00:0f: [mem 0xdb000000-0xdf9fffff] could not be reserved [ 0.511232] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.511241] pnp 00:10: [mem 0xffb80000-0xffbfffff] [ 0.511258] pnp 00:10: Plug and Play ACPI device, IDs INT0800 (active) [ 0.511261] pnp: PnP ACPI: found 17 devices [ 0.511262] ACPI: ACPI bus type pnp unregistered [ 0.516801] PCI: max bus depth: 1 pci_try_num: 2 [ 0.516829] pci 0000:00:1c.0: BAR 8: assigned [mem 0xdfa00000-0xdfbfffff] [ 0.516831] pci 0000:00:1c.0: BAR 9: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref] [ 0.516833] pci 0000:00:1c.0: BAR 7: assigned [io 0x2000-0x2fff] [ 0.516835] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.516837] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.516841] pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff] [ 0.516845] pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref] [ 0.516850] pci 0000:00:1c.6: PCI bridge to [bus 02-02] [ 0.516852] pci 0000:00:1c.6: bridge window [io 0xe000-0xefff] [ 0.516858] pci 0000:00:1c.6: bridge window [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.516863] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.516875] pci 0000:00:1c.0: enabling device (0000 -> 0003) [ 0.516882] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.516886] pci 0000:00:1c.0: setting latency timer to 64 [ 0.516893] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.516896] pci 0000:00:1c.6: setting latency timer to 64 [ 0.516902] pci 0000:00:1e.0: setting latency timer to 64 [ 0.516904] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.516906] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.516907] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.516908] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.516910] pci_bus 0000:00: resource 8 [mem 0xdfa00000-0xfebfffff] [ 0.516911] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.516912] pci_bus 0000:01: resource 1 [mem 0xdfa00000-0xdfbfffff] [ 0.516913] pci_bus 0000:01: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref] [ 0.516915] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.516916] pci_bus 0000:02: resource 2 [mem 0xfbe00000-0xfbefffff 64bit pref] [ 0.516917] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.516919] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.516920] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.516921] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff] [ 0.516922] pci_bus 0000:03: resource 8 [mem 0xdfa00000-0xfebfffff] [ 0.516943] NET: Registered protocol family 2 [ 0.516972] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.517102] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.517589] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.517715] TCP: Hash tables configured (established 262144 bind 65536) [ 0.517716] TCP reno registered [ 0.517718] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.517728] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.517787] NET: Registered protocol family 1 [ 0.517856] RPC: Registered named UNIX socket transport module. [ 0.517857] RPC: Registered udp transport module. [ 0.517858] RPC: Registered tcp transport module. [ 0.517859] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.517867] pci 0000:00:02.0: Boot video device [ 0.517878] pci 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.530168] pci 0000:00:1a.0: PCI INT C disabled [ 0.530196] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.543493] pci 0000:00:1d.0: PCI INT A disabled [ 0.543512] PCI: CLS 4 bytes, default 64 [ 0.544808] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.544812] Placing 64MB software IO TLB between ffff8800d6fda000 - ffff8800dafda000 [ 0.544813] software IO TLB at phys 0xd6fda000 - 0xdafda000 [ 0.558194] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.558326] fuse init (API version 7.17) [ 0.558398] JFS: nTxBlock = 8192, nTxLock = 65536 [ 0.559292] SGI XFS with security attributes, large block/inode numbers, no debug enabled [ 0.559508] msgmni has been set to 7726 [ 0.559769] alg: No test for stdrng (krng) [ 0.564523] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 0.564551] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.564552] io scheduler noop registered [ 0.564569] io scheduler cfq registered (default) [ 0.564708] intel_idle: MWAIT substates: 0x1120 [ 0.564709] intel_idle: v0.4 model 0x2A [ 0.564710] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.564753] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.564756] ACPI: Power Button [PWRB] [ 0.564785] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.564787] ACPI: Power Button [PWRF] [ 0.565796] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.586340] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.770733] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.800184] Linux agpgart interface v0.103 [ 0.800210] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 0.800279] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 0.801021] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 0.801092] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 0.801114] [drm] Initialized drm 1.1.0 20060810 [ 0.801126] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.801128] i915 0000:00:02.0: setting latency timer to 64 [ 0.829616] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 0.829617] [drm] MTRR allocation failed. Graphics performance may suffer. [ 0.829727] i915 0000:00:02.0: irq 40 for MSI/MSI-X [ 0.829730] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.829731] [drm] Driver supports precise vblank timestamp query. [ 0.829749] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.103520] fbcon: inteldrmfb (fb0) is primary device [ 1.271898] Console: switching to colour frame buffer device 160x64 [ 1.274580] fb0: inteldrmfb frame buffer device [ 1.274581] drm: registered panic notifier [ 1.274603] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.275226] brd: module loaded [ 1.275553] loop: module loaded [ 1.275736] nbd: registered device at major 43 [ 1.276265] Loading iSCSI transport class v2.0-870. [ 1.276314] iscsi: registered transport (tcp) [ 1.276358] ata_piix 0000:00:1f.2: version 2.13 [ 1.276373] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.276377] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.276401] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.276541] scsi0 : ata_piix [ 1.276581] scsi1 : ata_piix [ 1.276817] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfd00 bmdma 0xfa00 irq 19 [ 1.276821] ata2: SATA max UDMA/133 cmd 0xfc00 ctl 0xfb00 bmdma 0xfa08 irq 19 [ 1.276834] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.276838] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.276866] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.276973] scsi2 : ata_piix [ 1.277009] scsi3 : ata_piix [ 1.277180] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19 [ 1.277183] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19 [ 1.277215] tun: Universal TUN/TAP device driver, 1.6 [ 1.277216] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 1.277263] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.277264] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.277273] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 1.277274] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 1.277282] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k [ 1.277283] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 1.277342] sky2: driver version 1.30 [ 1.277357] r8168 Gigabit Ethernet driver 8.029.00-NAPI loaded [ 1.277369] r8168 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.277388] r8168 0000:02:00.0: setting latency timer to 64 [ 1.277444] r8168 0000:02:00.0: irq 41 for MSI/MSI-X [ 1.277684] eth%d: RTL8168E/8111E at 0xffffc90000038000, 1c:6f:65:d6:ea:f6, IRQ 41 [ 1.421759] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625. [ 1.421761] eth0: Identified chip type is 'RTL8168E/8111E'. [ 1.421762] r8168 Copyright (C) 2012 Realtek NIC software team nicfae@realtek.com [ 1.421763] This program comes with ABSOLUTELY NO WARRANTY; for details, please see http://www.gnu.org/licenses/. [ 1.421764] This is free software, and you are welcome to redistribute it under certain conditions; see http://www.gnu.org/licenses/. [ 1.421777] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.421786] ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.421795] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.421797] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 1.421801] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 1.421819] ehci_hcd 0000:00:1a.0: debug port 2 [ 1.425698] ehci_hcd 0000:00:1a.0: cache line size of 4 is not supported [ 1.425724] ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfbffe000 [ 1.436616] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 1.436705] hub 1-0:1.0: USB hub found [ 1.436707] hub 1-0:1.0: 2 ports detected [ 1.436739] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.436749] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.436751] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 1.436754] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.436772] ehci_hcd 0000:00:1d.0: debug port 2 [ 1.440649] ehci_hcd 0000:00:1d.0: cache line size of 4 is not supported [ 1.440678] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbffd000 [ 1.453278] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 1.453355] hub 2-0:1.0: USB hub found [ 1.453357] hub 2-0:1.0: 2 ports detected [ 1.453388] uhci_hcd: USB Universal Host Controller Interface driver [ 1.453397] Initializing USB Mass Storage driver... [ 1.453408] usbcore: registered new interface driver usb-storage [ 1.453409] USB Mass Storage support registered. [ 1.453430] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.453431] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.453553] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.453587] mousedev: PS/2 mouse device common for all mice [ 1.453690] rtc_cmos 00:04: RTC can wake from S4 [ 1.453772] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.453809] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.453816] i2c /dev entries driver [ 1.454085] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.454143] lirc_dev: IR Remote Control driver registered, major 252 [ 1.454145] IR NEC protocol handler initialized [ 1.454145] IR RC5(x) protocol handler initialized [ 1.454146] IR RC6 protocol handler initialized [ 1.454147] IR JVC protocol handler initialized [ 1.454148] IR Sony protocol handler initialized [ 1.454149] IR RC5 (streamzap) protocol handler initialized [ 1.454150] IR MCE Keyboard/mouse protocol handler initialized [ 1.454202] cpuidle: using governor ladder [ 1.454285] cpuidle: using governor menu [ 1.454286] EFI Variables Facility v0.08 2004-May-17 [ 1.454287] No iBFT detected. [ 1.454387] usbcore: registered new interface driver usbhid [ 1.454388] usbhid: USB HID core driver [ 1.454438] Netfilter messages via NETLINK v0.30. [ 1.454514] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.454524] TCP cubic registered [ 1.454591] NET: Registered protocol family 10 [ 1.454822] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 1.454829] NET: Registered protocol family 17 [ 1.454835] lib80211: common routines for IEEE802.11 drivers [ 1.454836] lib80211_crypt: registered algorithm 'NULL' [ 1.454837] Registering the dns_resolver key type [ 1.459251] rtc_cmos 00:04: setting system clock to 2012-05-03 09:10:57 UTC (1336036257) [ 1.470648] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.546610] Refined TSC clocksource calibration: 3092.972 MHz. [ 1.546615] Switching to clocksource tsc [ 1.607417] ata3: SATA link down (SStatus 0 SControl 300) [ 1.618239] ata4: SATA link down (SStatus 0 SControl 300) [ 1.743253] usb 1-1: new high-speed USB device number 2 using ehci_hcd [ 1.867269] hub 1-1:1.0: USB hub found [ 1.867472] hub 1-1:1.0: 6 ports detected [ 1.927446] ata1.00: SATA link down (SStatus 0 SControl 300) [ 1.927460] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.973195] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 2.069887] ata2.00: SATA link down (SStatus 0 SControl 300) [ 2.069899] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.087125] ata2.01: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133 [ 2.087128] ata2.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.097196] hub 2-1:1.0: USB hub found [ 2.097300] hub 2-1:1.0: 8 ports detected [ 2.101072] ata2.01: configured for UDMA/133 [ 2.101180] scsi 1:0:1:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5 [ 2.101268] sd 1:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.101283] sd 1:0:1:0: Attached scsi generic sg0 type 0 [ 2.101341] sd 1:0:1:0: [sda] Write Protect is off [ 2.101343] sd 1:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.101390] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.111554] sda: sda1 [ 2.111994] sd 1:0:1:0: [sda] Attached SCSI disk [ 2.114047] Freeing unused kernel memory: 3944k freed [ 2.114469] Write protecting the kernel read-only data: 10240k [ 2.118013] Freeing unused kernel memory: 1832k freed [ 2.118664] Freeing unused kernel memory: 208k freed [ 2.363237] usb 2-1.3: new high-speed USB device number 3 using ehci_hcd [ 2.451251] scsi4 : usb-storage 2-1.3:1.0 [ 2.516578] usb 2-1.4: new high-speed USB device number 4 using ehci_hcd [ 2.601833] hub 2-1.4:1.0: USB hub found [ 2.602184] hub 2-1.4:1.0: 4 ports detected [ 2.869996] usb 2-1.4.1: new full-speed USB device number 5 using ehci_hcd [ 3.026576] usb 2-1.4.3: new high-speed USB device number 6 using ehci_hcd [ 3.454157] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 3.610992] scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 3.611742] scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 3.612489] scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 9602 PQ: 0 ANSI: 0 [ 3.612885] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 3.612967] sd 4:0:0:1: Attached scsi generic sg2 type 0 [ 3.613043] sd 4:0:0:2: Attached scsi generic sg3 type 0 [ 3.613106] sd 4:0:0:3: Attached scsi generic sg4 type 0 [ 3.618019] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 3.618643] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 3.619020] sd 4:0:0:2: [sdd] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB) [ 3.619643] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 3.620768] sd 4:0:0:2: [sdd] Write Protect is off [ 3.620770] sd 4:0:0:2: [sdd] Mode Sense: 03 00 00 00 [ 3.621768] sd 4:0:0:2: [sdd] No Caching mode page present [ 3.621769] sd 4:0:0:2: [sdd] Assuming drive cache: write through [ 3.625268] sd 4:0:0:2: [sdd] No Caching mode page present [ 3.625270] sd 4:0:0:2: [sdd] Assuming drive cache: write through [ 3.632866] sdd: sdd1 sdd2 [ 3.636143] sd 4:0:0:2: [sdd] No Caching mode page present [ 3.636145] sd 4:0:0:2: [sdd] Assuming drive cache: write through [ 3.636146] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 4.307270] EXT4-fs (sdd1): couldn't mount as ext3 due to feature incompatibilities [ 4.350698] EXT4-fs (sdd1): couldn't mount as ext2 due to feature incompatibilities [ 4.374670] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 4.474046] EXT4-fs (sdd2): couldn't mount as ext3 due to feature incompatibilities [ 4.493981] EXT4-fs (sdd2): couldn't mount as ext2 due to feature incompatibilities [ 5.560482] EXT4-fs (sdd2): recovery complete [ 5.562358] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)

[ 6.366447] udevd[240]: starting version 182 [ 6.439482] usbcore: registered new interface driver usbserial [ 6.439484] usbserial: USB Serial Driver core [ 6.439939] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 6.440281] r8712u: DriverVersion: v7_0.20100831 [ 6.440288] r8712u: register rtl8712_netdev_ops to netdev_ops [ 6.440289] r8712u: USB_SPEED_HIGH with 4 endpoints [ 6.440756] r8712u: Boot from EFUSE: Autoload OK [ 6.464343] USB Serial support registered for FTDI USB Serial Device [ 6.464392] ftdi_sio 2-1.4.1:1.0: FTDI USB Serial Device converter detected [ 6.464415] usb 2-1.4.1: Detected FT232RL [ 6.464416] usb 2-1.4.1: Number of endpoints 2 [ 6.464418] usb 2-1.4.1: Endpoint 1 MaxPacketSize 64 [ 6.464420] usb 2-1.4.1: Endpoint 2 MaxPacketSize 64 [ 6.464421] usb 2-1.4.1: Setting MaxPacketSize 64 [ 6.464783] usb 2-1.4.1: FTDI USB Serial Device converter now attached to ttyUSB0 [ 6.464801] usbcore: registered new interface driver ftdi_sio [ 6.464803] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver [ 6.579222] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 6.579271] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X [ 6.579306] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 6.947009] r8712u: CustomerID = 0x0000 [ 6.947012] r8712u: MAC Address from efuse = fc:75:16:6d:f3:b1 [ 6.947014] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 6.947067] usbcore: registered new interface driver r8712u [ 7.232960] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0 [ 7.233099] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3 [ 7.233343] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4 [ 7.501918] r8168: eth0: link down [ 7.502289] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.999620] EXT4-fs (sda1): recovery complete [ 7.999786] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 8.235792] r8712u: 1 RCR=0x153f00e [ 8.236791] r8712u: 2 RCR=0x553f00e [ 8.342235] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 9.134983] r8168: eth0: link up [ 9.135201] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.504826] r8168: eth0: link up [ 10.966016] EXT4-fs (sdd1): re-mounted. Opts: barrier=1,data=ordered,commit=0 [ 12.075030] EXT4-fs (sdd2): re-mounted. Opts: barrier=1,data=ordered,commit=0 [ 12.081515] EXT4-fs (sda1): re-mounted. Opts: barrier=1,data=ordered,commit=0

lsmod: Module Size Used by snd_hda_codec_hdmi 22961 1 snd_hda_codec_realtek 192381 1 snd_hda_intel 22499 3 snd_hda_codec 73551 3 snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi coretemp 5522 0 snd_hwdep 5010 1 snd_hda_codec snd_pcm 59065 4 snd_hda_codec,snd_hda_intel,snd_hda_codec_hdmi snd_timer 16984 2 snd_pcm snd 44400 11 snd_timer,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek,snd_hda_codec_hdmi ftdi_sio 33471 1 snd_page_alloc 6657 2 snd_pcm,snd_hda_intel r8712u 163169 0 usbserial 27924 3 ftdi_sio

var/log/messages: May 3 11:11:02 openelec syslog.info syslogd started: BusyBox v1.20.0
May 3 11:11:02 openelec user.notice Boot: ### Starting Kernellog daemon ###
May 3 11:11:02 openelec user.notice Boot: ### starting udev daemon ###
May 3 11:11:02 openelec user.notice kernel: klogd started: BusyBox v1.20.0 (2012-05-01 06:34:21 CEST)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] Initializing cgroup subsys cpuset
May 3 11:11:02 openelec user.info kernel: [ 0.000000] Initializing cgroup subsys cpu
May 3 11:11:02 openelec user.notice kernel: [ 0.000000] Linux version 3.2.16 (jetstream@1801-lin007) (gcc version 4.7.0 (GCC) ) #1 SMP Tue May 1 06:33:19 CEST 2012 May 3 11:11:02 openelec user.info kernel: [ 0.000000] Command line: boot=LABEL=System disk=LABEL=Storage ssh quiet BOOT_IMAGE=/KERNEL
May 3 11:11:02 openelec user.info kernel: [ 0.000000] KERNEL supported cpus:
May 3 11:11:02 openelec user.info kernel: [ 0.000000] Intel GenuineIntel
May 3 11:11:02 openelec user.info kernel: [ 0.000000] BIOS-provided physical RAM map:
May 3 11:11:02 openelec user.info kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dafe0000 (usable)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000dafe0000 - 00000000dafe3000 (ACPI NVS)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000dafe3000 - 00000000daff0000 (ACPI data)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000daff0000 - 00000000db000000 (reserved)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 000000011fe00000 (usable)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] NX (Execute Disable) protection: active
May 3 11:11:02 openelec user.info kernel: [ 0.000000] DMI 2.4 present.
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] DMI: Gigabyte Technology Co., Ltd. H67M-UD2H-B3/H67M-UD2H-B3, BIOS F2 02/22/2011
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
May 3 11:11:02 openelec user.info kernel: [ 0.000000] last_pfn = 0x11fe00 max_arch_pfn = 0x400000000
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] MTRR default type: uncachable
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] MTRR fixed ranges enabled:
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] 00000-9FFFF write-back
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] A0000-BFFFF uncachable
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] C0000-CCFFF write-protect
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] CD000-EFFFF uncachable
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] F0000-FFFFF write-through
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] MTRR variable ranges enabled:
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] 0 base 000000000 mask F00000000 write-back
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] 2 base 0DC000000 mask FFC000000 uncachable
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] 3 base 0DB800000 mask FFF800000 uncachable
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] 4 base 100000000 mask FE0000000 write-back
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] 5 disabled
May 3 11:11:02 openelec user.debug kernel: [ 0.000000] 6 disabled

policenauts commented 12 years ago

is it normal that the driver version is the same that OE1.0.2 ?

r8712u: DriverVersion: v7_0.20100831

policenauts commented 12 years ago

I did try using a fixed IP within the DHCP range --> KO why in network settings even without cable there is status cable: connected ? sometime my MAC adress appear sometime, busy. ?

policenauts commented 12 years ago

It seems still not working in OE beta 4 when I check in network parameters, I have the not connected message. I think I didn't write it before, but I use WEP security.

sraue commented 11 years ago

can you check with WPA? i never tried WEP much, but i think WEP is broken for a longer time now

policenauts commented 11 years ago

I checked today, first with final release, it worked a few time then it deconnect, I switched off the PC, changed with OE beta 4, change settings, reboot, ko, try couple of time, ko. back to final, also ko this time.

policenauts commented 11 years ago

here are some pastebin, if it could help (1.95.7).

dmesg: http://pastebin.com/aEVTiLt9

xml settings: http://pastebin.com/k5546vMd

here there are some stranges things, pwd was show as if it was in qwerty (kyb in azerty) it will be nice instead that password is still hide if it was possible to show what we write for a short time.

ifconfig: http://pastebin.com/Th2jVMFQ

settings: http://pastebin.com/pbZgT4hM

policenauts commented 11 years ago

still present in 2.0 RC1 as for the remote problem who works fine in first final release.

sraue commented 11 years ago

closing, if this problem still exist with our latest releases please open a new report