search

OpenELEC / OpenELEC.tv

OpenELEC - The living room PC for everyone
http://openelec.tv
1.61k stars 881 forks source link

Driver request for TV-tuner Hauppauge WinTV-HVR-1110 #624

Closed d0v1k closed 12 years ago

d0v1k commented 12 years ago

Please consider adding driver and firmware for Hauppauge WinTV-HVR-1110

lspci -vv -nn -s 03:01.0

03:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133](rev d1) Subsystem: Hauppauge computer works Inc. Device [0070:6707] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- SERR- <PERR- INTx- Latency: 64 (21000ns min, 8000ns max) Interrupt: pin A routed to IRQ 17 Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: saa7134 Kernel modules: saa7134

dmesg info:

[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-23-generic-pae (buildd@palmer) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 22:19:09 UTC 2012 (Ubuntu 3.2.0-23.36-generic-pae 3.2.14) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6a0000 (usable) [ 0.000000] BIOS-e820: 00000000bf6a0000 - 00000000bf6ae000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf6ae000 - 00000000bf6f0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6f0000 - 00000000bf6fe000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7529/MS-7529, BIOS V2.1 07/15/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xbf6a0 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BF700000 mask FFFF00000 uncachable [ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3063MB, range: 1MB, type UC [ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC [ 0.000000] total RAM covered: 3063M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2GB, range: 1GB, type WB [ 0.000000] reg 2, base: 3063MB, range: 1MB, type UC [ 0.000000] reg 3, base: 3064MB, range: 8MB, type UC [ 0.000000] found SMP MP-table at [c00ff780] ff780 [ 0.000000] initial memory mapped : 0 - 02000000 [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 1ffb000-2000000 [ 0.000000] RAMDISK: 364fe000 - 37277000 [ 0.000000] ACPI: RSDP 000f9640 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT bf6a0000 0003C (v01 7529MS A7529200 20080715 MSFT 00000097) [ 0.000000] ACPI: FACP bf6a0200 00084 (v01 7529MS A7529200 20080715 MSFT 00000097) [ 0.000000] ACPI: DSDT bf6a05c0 05A49 (v01 A7529 A7529200 00000200 INTL 20051117) [ 0.000000] ACPI: FACS bf6ae000 00040 [ 0.000000] ACPI: APIC bf6a0390 0006C (v01 7529MS A7529200 20080715 MSFT 00000097) [ 0.000000] ACPI: MCFG bf6a0400 0003C (v01 7529MS OEMMCFG 20080715 MSFT 00000097) [ 0.000000] ACPI: SLIC bf6a0440 00176 (v01 7529MS A7529200 20080715 MSFT 00000097) [ 0.000000] ACPI: OEMB bf6ae040 00071 (v01 7529MS A7529200 20080715 MSFT 00000097) [ 0.000000] ACPI: GSCI bf6ae0c0 02024 (v01 7529MS GMCHSCI 20080715 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2170MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x000bf6a0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf6a0 [ 0.000000] On node 0 totalpages: 783919 [ 0.000000] free_area_init_node: node 0, pgdat c186b480, node_mem_map f4d0e200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4342 pages used for memmap [ 0.000000] HighMem zone: 551340 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bf6fe000 (gap: bf6fe000:3f702000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7800000 s34240 r0 d23104 u524288 [ 0.000000] pcpu-alloc: s34240 r0 d23104 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 777793 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-23-generic-pae root=UUID=bc2a0598-6504-4c8d-a6b4-40755e022288 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 12544256 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00037bfe:000bf6a0) [ 0.000000] Memory: 3073640k/3136128k available (5825k kernel code, 62036k reserved, 2850k data, 740k init, 2222728k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc1879000 - 0xc1932000 ( 740 kB) [ 0.000000] .data : 0xc15b04bc - 0xc1878d00 (2850 kB) [ 0.000000] .text : 0xc1000000 - 0xc15b04bc (5825 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:2304 nr_irqs:712 16 [ 0.000000] CPU 0 irqstacks, hard=f740a000 soft=f740c000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2218.023 MHz processor. [ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4436.04 BogoMIPS (lpj=8872092) [ 0.004008] pid_max: default: 32768 minimum: 301 [ 0.004031] Security Framework initialized [ 0.004051] AppArmor: AppArmor initialized [ 0.004053] Yama: becoming mindful. [ 0.004110] Mount-cache hash table entries: 512 [ 0.008044] Initializing cgroup subsys cpuacct [ 0.008050] Initializing cgroup subsys memory [ 0.008058] Initializing cgroup subsys devices [ 0.008061] Initializing cgroup subsys freezer [ 0.008063] Initializing cgroup subsys blkio [ 0.008070] Initializing cgroup subsys perf_event [ 0.008097] CPU: Physical Processor ID: 0 [ 0.008099] CPU: Processor Core ID: 0 [ 0.008102] mce: CPU supports 6 MCE banks [ 0.008110] CPU0: Thermal monitoring enabled (TM2) [ 0.008114] using mwait in idle threads. [ 0.010226] ACPI: Core revision 20110623 [ 0.013412] ftrace: allocating 26594 entries in 53 pages [ 0.016055] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.016378] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.056866] CPU0: Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz stepping 0d [ 0.060003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.060003] PEBS disabled due to CPU errata. [ 0.060003] ... version: 2 [ 0.060003] ... bit width: 40 [ 0.060003] ... generic registers: 2 [ 0.060003] ... value mask: 000000ffffffffff [ 0.060003] ... max period: 000000007fffffff [ 0.060003] ... fixed-purpose events: 3 [ 0.060003] ... event mask: 0000000700000003 [ 0.060003] NMI watchdog enabled, takes one hw-pmu counter. [ 0.060003] CPU 1 irqstacks, hard=f7512000 soft=f7514000 [ 0.060003] Booting Node 0, Processors #1 [ 0.060003] smpboot cpu 1: start_ip = 9b000 [ 0.008000] Initializing CPU#1 [ 0.148039] NMI watchdog enabled, takes one hw-pmu counter. [ 0.148078] Brought up 2 CPUs [ 0.148080] Total of 2 processors activated (8872.61 BogoMIPS). [ 0.149003] devtmpfs: initialized [ 0.149003] EVM: security.selinux [ 0.149003] EVM: security.SMACK64 [ 0.149003] EVM: security.capability [ 0.149003] PM: Registering ACPI NVS region at bf6ae000 (270336 bytes) [ 0.149136] print_constraints: dummy: [ 0.149165] RTC time: 8:57:10, date: 05/10/12 [ 0.149208] NET: Registered protocol family 16 [ 0.149243] Trying to unpack rootfs image as initramfs... [ 0.149357] EISA bus registered [ 0.149375] ACPI: bus type pci registered [ 0.149447] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff](base 0xe0000000) [ 0.149450] PCI: not using MMCONFIG [ 0.149580] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX. [ 0.149640] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.149642] PCI: Using configuration type 1 for base access [ 0.152291] bio: create slab at 0 [ 0.152398] ACPI: Added _OSI(Module Device) [ 0.152401] ACPI: Added _OSI(Processor Device) [ 0.152403] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.152406] ACPI: Added _OSI(Processor Aggregator Device) [ 0.153729] ACPI: EC: Detected MSI hardware, enabling workarounds. [ 0.153736] ACPI: EC: Look up EC in DSDT [ 0.155405] ACPI: Executed 1 blocks of module-level executable AML code [ 0.158098] ACPI: Interpreter enabled [ 0.158120] ACPI: (supports S0 S1 S4 S5) [ 0.158142] ACPI: Using IOAPIC for interrupt routing [ 0.158169] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff](base 0xe0000000) [ 0.159760] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.159763] PCI: Using MMCONFIG for extended config space [ 0.165749] ACPI: No dock devices found. [ 0.165753] HEST: Table not found. [ 0.165760] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.165961] ACPI: PCI Root Bridge [PCI0](domain 0000 [bus 00-ff]) [ 0.166157] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.166160] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.166163] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.166166] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.166169] pci_root PNP0A08:00: host bridge window [mem 0xbf700000-0xdfffffff] [ 0.166171] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] [ 0.166190] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600 [ 0.166244] pci 0000:00:02.0: [8086:29c2] type 0 class 0x000300 [ 0.166256] pci 0000:00:02.0: reg 10: [mem 0xfe980000-0xfe9fffff] [ 0.166263] pci 0000:00:02.0: reg 14: [io 0xcc00-0xcc07] [ 0.166270] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] [ 0.166276] pci 0000:00:02.0: reg 1c: [mem 0xfe800000-0xfe8fffff] [ 0.166352] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 [ 0.166368] pci 0000:00:1b.0: reg 10: [mem 0xfe978000-0xfe97bfff 64bit] [ 0.166445] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.166450] pci 0000:00:1b.0: PME# disabled [ 0.166471] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604 [ 0.166545] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.166550] pci 0000:00:1c.0: PME# disabled [ 0.166572] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604 [ 0.166650] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.166654] pci 0000:00:1c.1: PME# disabled [ 0.166679] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03 [ 0.166722] pci 0000:00:1d.0: reg 20: [io 0xc880-0xc89f] [ 0.166754] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03 [ 0.166796] pci 0000:00:1d.1: reg 20: [io 0xc800-0xc81f] [ 0.166833] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03 [ 0.166876] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f] [ 0.166908] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03 [ 0.166950] pci 0000:00:1d.3: reg 20: [io 0xc400-0xc41f] [ 0.166992] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03 [ 0.167012] pci 0000:00:1d.7: reg 10: [mem 0xfe977c00-0xfe977fff] [ 0.167101] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.167106] pci 0000:00:1d.7: PME# disabled [ 0.167124] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.167191] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601 [ 0.167282] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.167293] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff) [ 0.167297] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 0017) [ 0.167301] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 4700 (mask 00ff) [ 0.167343] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101 [ 0.167357] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.167367] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.167377] pci 0000:00:1f.1: reg 18: [io 0x08f0-0x08f7] [ 0.167387] pci 0000:00:1f.1: reg 1c: [io 0x08f8-0x08fb] [ 0.167396] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 0.167437] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101 [ 0.167452] pci 0000:00:1f.2: reg 10: [io 0xc080-0xc087] [ 0.167461] pci 0000:00:1f.2: reg 14: [io 0xc000-0xc003] [ 0.167470] pci 0000:00:1f.2: reg 18: [io 0xbc00-0xbc07] [ 0.167478] pci 0000:00:1f.2: reg 1c: [io 0xb880-0xb883] [ 0.167487] pci 0000:00:1f.2: reg 20: [io 0xb800-0xb80f] [ 0.167524] pci 0000:00:1f.2: PME# supported from D3hot [ 0.167528] pci 0000:00:1f.2: PME# disabled [ 0.167544] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05 [ 0.167598] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 0.167675] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.167753] pci 0000:02:00.0: [10ec:8136] type 0 class 0x000200 [ 0.167773] pci 0000:02:00.0: reg 10: [io 0xd800-0xd8ff] [ 0.167806] pci 0000:02:00.0: reg 18: [mem 0xfeaff000-0xfeafffff 64bit] [ 0.167844] pci 0000:02:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref] [ 0.167930] pci 0000:02:00.0: supports D1 D2 [ 0.167933] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.167939] pci 0000:02:00.0: PME# disabled [ 0.167964] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.167976] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.167980] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.167985] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff] [ 0.168036] pci 0000:03:00.0: [1186:4300] type 0 class 0x000200 [ 0.168055] pci 0000:03:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.168066] pci 0000:03:00.0: reg 14: [mem 0xfebffc00-0xfebffcff] [ 0.168111] pci 0000:03:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref] [ 0.168141] pci 0000:03:00.0: supports D1 D2 [ 0.168143] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.168148] pci 0000:03:00.0: PME# disabled [ 0.168166] pci 0000:03:01.0: [1131:7133] type 0 class 0x000480 [ 0.168185] pci 0000:03:01.0: reg 10: [mem 0xfebff000-0xfebff7ff] [ 0.168267] pci 0000:03:01.0: supports D1 D2 [ 0.168318] pci 0000:00:1e.0: PCI bridge to [bus 03-03](subtractive decode) [ 0.168323] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.168327] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.168334] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7](subtractive decode) [ 0.168337] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff](subtractive decode) [ 0.168339] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff](subtractive decode) [ 0.168342] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff](subtractive decode) [ 0.168345] pci 0000:00:1e.0: bridge window [mem 0xbf700000-0xdfffffff](subtractive decode) [ 0.168348] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff](subtractive decode) [ 0.168364] pci_bus 0000:00: on NUMA node 0 [ 0.168369] ACPI: PCI Interrupt Routing Table [SB.PCI0._PRT] [ 0.168534] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P1._PRT] [ 0.168651] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P4._PRT] [ 0.168700] ACPI: PCI Interrupt Routing Table [SB.PCI0.P0P5._PRT] [ 0.168851] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.169015] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.172756] ACPI: PCI Interrupt Link [LNKA](IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.172811] ACPI: PCI Interrupt Link [LNKB](IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.172862] ACPI: PCI Interrupt Link [LNKC](IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.172913] ACPI: PCI Interrupt Link [LNKD](IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.172963] ACPI: PCI Interrupt Link [LNKE](IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. [ 0.173018] ACPI: PCI Interrupt Link [LNKF](IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. [ 0.173070] ACPI: PCI Interrupt Link [LNKG](IRQs 3 4 5 6 7 10 11 12 14 15) 0, disabled. [ 0.173122] ACPI: PCI Interrupt Link [LNKH](IRQs 3 4 5 6 7 10 11 12 14 15) [ 0.173269] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.173282] vgaarb: loaded [ 0.173284] vgaarb: bridge control possible 0000:00:02.0 [ 0.173418] i2c-core: driver [aat2870] using legacy suspend method [ 0.173421] i2c-core: driver [aat2870] using legacy resume method [ 0.173510] SCSI subsystem initialized [ 0.176040] libata version 3.00 loaded. [ 0.176061] usbcore: registered new interface driver usbfs [ 0.176075] usbcore: registered new interface driver hub [ 0.176110] usbcore: registered new device driver usb [ 0.176220] PCI: Using ACPI for IRQ routing [ 0.176225] PCI: pci_cache_line_size set to 64 bytes [ 0.176306] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.176309] reserve RAM buffer: 00000000bf6a0000 - 00000000bfffffff [ 0.176437] NetLabel: Initializing [ 0.176439] NetLabel: domain hash size = 128 [ 0.176441] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.176452] NetLabel: unlabeled traffic allowed by default [ 0.176619] hpet clockevent registered [ 0.176624] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.176629] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.176634] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.180084] Switching to clocksource hpet [ 0.189573] AppArmor: AppArmor Filesystem Enabled [ 0.189610] pnp: PnP ACPI init [ 0.189631] ACPI: bus type pnp registered [ 0.189758] pnp 00:00: [bus 00-ff] [ 0.189762] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.189765] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.189767] pnp 00:00: [io 0x0d00-0xffff window] [ 0.189770] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.189772] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.189775] pnp 00:00: [mem 0xbf700000-0xdfffffff window] [ 0.189777] pnp 00:00: [mem 0xf0000000-0xffffffff window] [ 0.189845] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.189856] pnp 00:01: [mem 0xfed14000-0xfed19fff] [ 0.189914] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.189918] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.189955] pnp 00:02: [dma 4] [ 0.189958] pnp 00:02: [io 0x0000-0x000f] [ 0.189960] pnp 00:02: [io 0x0081-0x0083] [ 0.189962] pnp 00:02: [io 0x0087] [ 0.189964] pnp 00:02: [io 0x0089-0x008b] [ 0.189966] pnp 00:02: [io 0x008f] [ 0.189968] pnp 00:02: [io 0x00c0-0x00df] [ 0.190002] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.190014] pnp 00:03: [io 0x0070-0x0071] [ 0.190026] pnp 00:03: [irq 8] [ 0.190057] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.190067] pnp 00:04: [io 0x0061] [ 0.190102] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.190112] pnp 00:05: [io 0x00f0-0x00ff] [ 0.190119] pnp 00:05: [irq 13] [ 0.190152] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.190425] pnp 00:06: [io 0x03f8-0x03ff] [ 0.190431] pnp 00:06: [irq 4] [ 0.190434] pnp 00:06: [dma 0 disabled] [ 0.190509] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.190709] pnp 00:07: [io 0x0010-0x001f] [ 0.190712] pnp 00:07: [io 0x0022-0x002d] [ 0.190714] pnp 00:07: [io 0x0030-0x003f] [ 0.190716] pnp 00:07: [io 0x0044-0x005f] [ 0.190718] pnp 00:07: [io 0x0062-0x0063] [ 0.190721] pnp 00:07: [io 0x0065-0x006f] [ 0.190723] pnp 00:07: [io 0x0072-0x007f] [ 0.190725] pnp 00:07: [io 0x0080] [ 0.190727] pnp 00:07: [io 0x0084-0x0086] [ 0.190729] pnp 00:07: [io 0x0088] [ 0.190731] pnp 00:07: [io 0x008c-0x008e] [ 0.190733] pnp 00:07: [io 0x0090-0x009f] [ 0.190735] pnp 00:07: [io 0x00a2-0x00bf] [ 0.190737] pnp 00:07: [io 0x00e0-0x00ef] [ 0.190739] pnp 00:07: [io 0x04d0-0x04d1] [ 0.190741] pnp 00:07: [io 0x0800-0x087f] [ 0.190744] pnp 00:07: [io 0x0000-0xffffffffffffffff disabled] [ 0.190746] pnp 00:07: [io 0x0480-0x04bf] [ 0.190751] pnp 00:07: [mem 0xfed1c000-0xfed1ffff] [ 0.190753] pnp 00:07: [mem 0xfed20000-0xfed3ffff] [ 0.190755] pnp 00:07: [mem 0xfed45000-0xfed89fff] [ 0.190833] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.190836] system 00:07: [io 0x0800-0x087f] has been reserved [ 0.190839] system 00:07: [io 0x0480-0x04bf] has been reserved [ 0.190843] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.190846] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.190849] system 00:07: [mem 0xfed45000-0xfed89fff] has been reserved [ 0.190853] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.190936] pnp 00:08: [mem 0xffb80000-0xffbfffff] [ 0.190939] pnp 00:08: [mem 0xfff80000-0xffffffff] [ 0.190977] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active) [ 0.191021] pnp 00:09: [mem 0xffc00000-0xfff7ffff] [ 0.191076] system 00:09: [mem 0xffc00000-0xfff7ffff] has been reserved [ 0.191079] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.191166] pnp 00:0a: [io 0x0060] [ 0.191168] pnp 00:0a: [io 0x0064] [ 0.191171] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.191173] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.191228] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.191232] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.191236] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.191359] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] [ 0.191362] pnp 00:0b: [io 0x0a00-0x0adf] [ 0.191364] pnp 00:0b: [io 0x0ae0-0x0aef] [ 0.191421] system 00:0b: [io 0x0a00-0x0adf] has been reserved [ 0.191424] system 00:0b: [io 0x0ae0-0x0aef] has been reserved [ 0.191428] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.191710] pnp 00:0c: [io 0x02f8-0x02ff] [ 0.191718] pnp 00:0c: [irq 3] [ 0.191721] pnp 00:0c: [dma 0 disabled] [ 0.191822] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.192209] pnp 00:0d: [io 0x0378-0x037f] [ 0.192216] pnp 00:0d: [irq 7] [ 0.192219] pnp 00:0d: [dma 0 disabled] [ 0.192385] pnp 00:0d: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.192435] pnp 00:0e: [mem 0xe0000000-0xefffffff] [ 0.192493] system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved [ 0.192497] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.192679] pnp 00:0f: [mem 0x00000000-0x0009ffff] [ 0.192682] pnp 00:0f: [mem 0x000c0000-0x000cffff] [ 0.192684] pnp 00:0f: [mem 0x000e0000-0x000fffff] [ 0.192686] pnp 00:0f: [mem 0x00100000-0xbf6fffff] [ 0.192689] pnp 00:0f: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.192758] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.192762] system 00:0f: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.192765] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.192768] system 00:0f: [mem 0x00100000-0xbf6fffff] could not be reserved [ 0.192772] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.192910] pnp: PnP ACPI: found 16 devices [ 0.192912] ACPI: ACPI bus type pnp unregistered [ 0.192917] PnPBIOS: Disabled by ACPI PNP [ 0.229521] PCI: max bus depth: 1 pci_try_num: 2 [ 0.229569] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbf700000-0xbf8fffff 64bit pref] [ 0.229573] pci 0000:00:1c.0: BAR 14: assigned [mem 0xbf900000-0xbfafffff] [ 0.229577] pci 0000:00:1c.0: BAR 15: assigned [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 0.229582] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.229585] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.229588] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 0.229594] pci 0000:00:1c.0: bridge window [mem 0xbf900000-0xbfafffff] [ 0.229598] pci 0000:00:1c.0: bridge window [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 0.229605] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 0.229608] pci 0000:00:1c.1: bridge window [io 0xd000-0xdfff] [ 0.229614] pci 0000:00:1c.1: bridge window [mem 0xfea00000-0xfeafffff] [ 0.229618] pci 0000:00:1c.1: bridge window [mem 0xbf700000-0xbf8fffff 64bit pref] [ 0.229625] pci 0000:00:1e.0: PCI bridge to [bus 03-03] [ 0.229628] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 0.229633] pci 0000:00:1e.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 0.229648] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 0.229667] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.229673] pci 0000:00:1c.0: setting latency timer to 64 [ 0.229684] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.229688] pci 0000:00:1c.1: setting latency timer to 64 [ 0.229695] pci 0000:00:1e.0: setting latency timer to 64 [ 0.229699] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.229702] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.229705] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.229707] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.229710] pci_bus 0000:00: resource 8 [mem 0xbf700000-0xdfffffff] [ 0.229712] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff] [ 0.229715] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] [ 0.229718] pci_bus 0000:01: resource 1 [mem 0xbf900000-0xbfafffff] [ 0.229720] pci_bus 0000:01: resource 2 [mem 0xbfb00000-0xbfcfffff 64bit pref] [ 0.229723] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.229725] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.229728] pci_bus 0000:02: resource 2 [mem 0xbf700000-0xbf8fffff 64bit pref] [ 0.229731] pci_bus 0000:03: resource 0 [io 0xe000-0xefff] [ 0.229733] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff] [ 0.229736] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.229738] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.229741] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.229743] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.229746] pci_bus 0000:03: resource 8 [mem 0xbf700000-0xdfffffff] [ 0.229749] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xffffffff] [ 0.229799] NET: Registered protocol family 2 [ 0.229886] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.230147] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.230690] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.231055] TCP: Hash tables configured (established 131072 bind 65536) [ 0.231058] TCP reno registered [ 0.231061] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.231075] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.231187] NET: Registered protocol family 1 [ 0.231209] pci 0000:00:02.0: Boot video device [ 0.231243] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.231262] pci 0000:00:1d.0: PCI INT A disabled [ 0.231280] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.231297] pci 0000:00:1d.1: PCI INT B disabled [ 0.231308] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.231324] pci 0000:00:1d.2: PCI INT C disabled [ 0.231332] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.231348] pci 0000:00:1d.3: PCI INT D disabled [ 0.231357] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.231389] pci 0000:00:1d.7: PCI INT A disabled [ 0.231413] PCI: CLS 32 bytes, default 64 [ 0.231797] audit: initializing netlink socket (disabled) [ 0.231809] type=2000 audit(1336640230.224:1): initialized [ 0.260422] highmem bounce pool size: 64 pages [ 0.260428] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.273758] VFS: Disk quotas dquot_6.5.2 [ 0.273834] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.274463] fuse init (API version 7.17) [ 0.274571] msgmni has been set to 1661 [ 0.274943] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.274985] io scheduler noop registered [ 0.274988] io scheduler deadline registered [ 0.274997] io scheduler cfq registered (default) [ 0.275129] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.275175] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.275283] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.275322] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.275454] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 0.275459] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded [ 0.275479] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt [ 0.275482] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 0.275486] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded [ 0.275510] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.275556] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 1462 ss_did 7529 [ 0.275580] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded [ 0.275593] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 1462 ss_did 7529 [ 0.275611] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded [ 0.275619] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.275713] intel_idle: MWAIT substates: 0x220 [ 0.275715] intel_idle: does not run on family 6 model 15 [ 0.275808] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.275813] ACPI: Power Button [PWRB] [ 0.275863] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.275867] ACPI: Power Button [PWRF] [ 0.277673] ERST: Table is not found! [ 0.277676] GHES: HEST is not enabled! [ 0.277791] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.284275] isapnp: Scanning for PnP cards... [ 0.298172] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.360400] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.500144] Freeing initrd memory: 13796k freed [ 0.637177] isapnp: No Plug & Play device found [ 0.712652] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.748531] 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.764314] Linux agpgart interface v0.103 [ 0.764424] agpgart-intel 0000:00:00.0: Intel G33 Chipset [ 0.764509] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 0.764816] agpgart-intel 0000:00:00.0: detected 8192K stolen memory [ 0.764947] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 0.766664] brd: module loaded [ 0.767526] loop: module loaded [ 0.767721] ata_piix 0000:00:1f.1: version 2.13 [ 0.767737] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.767773] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.768147] scsi0 : ata_piix [ 0.768244] scsi1 : ata_piix [ 0.769478] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.769482] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.769514] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.769521] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.769564] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.769899] scsi2 : ata_piix [ 0.769979] scsi3 : ata_piix [ 0.771190] ata3: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 19 [ 0.771193] ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 19 [ 0.771630] Fixed MDIO Bus: probed [ 0.771653] tun: Universal TUN/TAP device driver, 1.6 [ 0.771656] tun: (C) 1999-2004 Max Krasnyansky maxk@qualcomm.com [ 0.771728] PPP generic driver version 2.4.2 [ 0.771867] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.771888] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.771908] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.771912] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.771960] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.771980] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.771991] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.775863] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.775882] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe977c00 [ 0.788028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.788236] hub 1-0:1.0: USB hub found [ 0.788241] hub 1-0:1.0: 8 ports detected [ 0.788331] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.788346] uhci_hcd: USB Universal Host Controller Interface driver [ 0.788369] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.788377] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.788381] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.788430] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.788453] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c880 [ 0.788589] hub 2-0:1.0: USB hub found [ 0.788594] hub 2-0:1.0: 2 ports detected [ 0.788665] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.788673] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.788676] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.788723] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.788746] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800 [ 0.788889] hub 3-0:1.0: USB hub found [ 0.788894] hub 3-0:1.0: 2 ports detected [ 0.788963] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.788971] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.788974] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.789024] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.789056] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480 [ 0.789191] hub 4-0:1.0: USB hub found [ 0.789195] hub 4-0:1.0: 2 ports detected [ 0.789264] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.789271] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.789275] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.789323] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.789357] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c400 [ 0.789492] hub 5-0:1.0: USB hub found [ 0.789496] hub 5-0:1.0: 2 ports detected [ 0.789614] usbcore: registered new interface driver libusual [ 0.789682] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.792148] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.792156] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.792310] mousedev: PS/2 mouse device common for all mice [ 0.792483] rtc_cmos 00:03: RTC can wake from S4 [ 0.792592] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.792616] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.792684] device-mapper: uevent: version 1.0.3 [ 0.792767] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.792812] EISA: Probing bus 0 at eisa.0 [ 0.792816] EISA: Cannot allocate resource for mainboard [ 0.792819] Cannot allocate resource for EISA slot 1 [ 0.792821] Cannot allocate resource for EISA slot 2 [ 0.792823] Cannot allocate resource for EISA slot 3 [ 0.792825] Cannot allocate resource for EISA slot 4 [ 0.792827] Cannot allocate resource for EISA slot 5 [ 0.792829] Cannot allocate resource for EISA slot 6 [ 0.792831] Cannot allocate resource for EISA slot 7 [ 0.792833] Cannot allocate resource for EISA slot 8 [ 0.792835] EISA: Detected 0 cards. [ 0.792845] cpufreq-nforce2: No nForce2 chipset. [ 0.792847] cpuidle: using governor ladder [ 0.792849] cpuidle: using governor menu [ 0.792851] EFI Variables Facility v0.08 2004-May-17 [ 0.793140] TCP cubic registered [ 0.793274] NET: Registered protocol family 10 [ 0.793894] NET: Registered protocol family 17 [ 0.793912] Registering the dns_resolver key type [ 0.793936] Using IPI No-Shortcut mode [ 0.794050] PM: Hibernation image not present or could not be loaded. [ 0.794063] registered taskstats version 1 [ 0.806287] Magic number: 12:34:978 [ 0.806384] rtc_cmos 00:03: setting system clock to 2012-05-10 08:57:11 UTC (1336640231) [ 0.806407] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.806409] EDD information not available. [ 0.948311] ata1.00: ATAPI: SONY DVD RW DRU-830A, SS20, max UDMA/66 [ 0.948316] ata1.00: limited to UDMA/33 due to 40-wire cable [ 0.964204] ata1.00: configured for UDMA/33 [ 0.965618] scsi 0:0:0:0: CD-ROM SONY DVD RW DRU-830A SS20 PQ: 0 ANSI: 5 [ 0.971071] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 0.971077] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 0.971266] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 0.971394] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 0.984502] ata3.00: ATA-7: ST3160815AS, 4.AAB, max UDMA/133 [ 0.984509] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.051134] ata3.00: configured for UDMA/133 [ 1.051298] scsi 2:0:0:0: Direct-Access ATA ST3160815AS 4.AA PQ: 0 ANSI: 5 [ 1.051433] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.051467] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.051487] sd 2:0:0:0: [sda] Write Protect is off [ 1.051490] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.051516] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.146551] sda: sda1 sda2 < sda5 sda6 > [ 1.147023] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.147097] Freeing unused kernel memory: 740k freed [ 1.147389] Write protecting the kernel text: 5828k [ 1.147409] Write protecting the kernel read-only data: 2376k [ 1.147411] NX-protecting the kernel data: 4412k [ 1.167070] udevd[94]: starting version 175 [ 1.228032] Refined TSC clocksource calibration: 2218.174 MHz. [ 1.228039] Switching to clocksource tsc [ 1.233810] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.233836] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.233871] r8169 0000:02:00.0: setting latency timer to 64 [ 1.233947] r8169 0000:02:00.0: irq 42 for MSI/MSI-X [ 1.234671] r8169 0000:02:00.0: eth0: RTL8101e at 0xf8420000, 00:21:85:64:3c:64, XID 94200000 IRQ 42 [ 1.234702] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.234720] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.234744] r8169 0000:03:00.0: (unregistered net_device): not PCI Express [ 1.235892] r8169 0000:03:00.0: eth1: RTL8169sb/8110sb at 0xf8422c00, 00:21:91:0b:91:54, XID 10000000 IRQ 16 [ 1.235896] r8169 0000:03:00.0: eth1: jumbo features [frames: 7152 bytes, tx checksumming: ok] [ 1.340036] usb 2-2: new low-speed USB device number 2 using uhci_hcd [ 1.517042] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2 [ 1.517157] generic-usb 0003:04F3:0103.0001: input,hidraw0: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-0000:00:1d.0-2/input0 [ 1.539665] input: HID 04f3:0103 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3 [ 1.539761] generic-usb 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Device [HID 04f3:0103] on usb-0000:00:1d.0-2/input1 [ 1.539782] usbcore: registered new interface driver usbhid [ 1.539784] usbhid: USB HID core driver [ 1.625908] EXT4-fs (sda5): INFO: recovery required on readonly filesystem [ 1.625912] EXT4-fs (sda5): write access will be enabled during recovery [ 1.740063] usb 3-2: new low-speed USB device number 2 using uhci_hcd [ 1.927119] EXT4-fs (sda5): recovery complete [ 1.929870] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 1.942369] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4 [ 1.942525] generic-usb 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:1d.1-2/input0 [ 10.987390] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 10.987401] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 11.008689] udevd[308]: starting version 175 [ 11.067680] lp: driver loaded but no devices found [ 11.068606] [drm] Initialized drm 1.1.0 20060810 [ 11.085639] Adding 3134460k swap on /dev/sda6. Priority:-1 extents:1 across:3134460k [ 11.089839] intel_rng: FWH not detected [ 11.107263] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.107270] i915 0000:00:02.0: setting latency timer to 64 [ 11.114425] leds_ss4200: no LED devices found [ 11.148901] i915 0000:00:02.0: irq 43 for MSI/MSI-X [ 11.148909] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 11.148911] [drm] Driver supports precise vblank timestamp query. [ 11.189157] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 11.195436] [drm] initialized overlay support [ 11.304842] type=1400 audit(1336633041.995:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=489 comm="apparmor_parser" [ 11.305293] type=1400 audit(1336633041.995:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=489 comm="apparmor_parser" [ 11.305540] type=1400 audit(1336633041.995:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=489 comm="apparmor_parser" [ 11.315921] fbcon: inteldrmfb (fb0) is primary device [ 11.319191] Console: switching to colour frame buffer device 180x56 [ 11.319227] fb0: inteldrmfb frame buffer device [ 11.319229] drm: registered panic notifier [ 11.319246] No ACPI video bus found [ 11.319338] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 11.338116] Linux video capture interface: v2.00 [ 11.366683] parport_pc 00:0d: reported by Plug and Play ACPI [ 11.366730] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 11.422934] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.422998] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 11.423028] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 11.461665] lp0: using parport0 (interrupt-driven). [ 11.467967] hda_codec: ALC888: BIOS auto-probing. [ 11.531054] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 11.531580] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 11.531765] IR NEC protocol handler initialized [ 11.531994] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 11.534182] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 11.534534] input: HDA Intel Line-Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 11.576487] IR RC5(x) protocol handler initialized [ 11.594805] saa7130/34: v4l2 driver version 0, 2, 17 loaded [ 11.594860] saa7134 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.594866] saa7133[0]: found at 0000:03:01.0, rev: 209, irq: 17, latency: 64, mmio: 0xfebff000 [ 11.594873] saa7133[0]: subsystem: 0070:6707, board: Hauppauge WinTV-HVR1120 DVB-T/Hybrid [card=156,autodetected] [ 11.594893] saa7133[0]: board init: gpio is 40000 [ 11.628927] ppdev: user-space parallel port driver [ 11.656146] Registered IR keymap rc-hauppauge [ 11.656398] input: saa7134 IR (Hauppauge WinTV-HVR as /devices/pci0000:00/0000:00:1e.0/0000:03:01.0/rc/rc0/input10 [ 11.656495] rc0: saa7134 IR (Hauppauge WinTV-HVR as /devices/pci0000:00/0000:00:1e.0/0000:03:01.0/rc/rc0 [ 11.720369] IR RC6 protocol handler initialized [ 11.808048] saa7133[0]: i2c eeprom 00: 70 00 07 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 11.808062] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff [ 11.808073] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 b0 ff ff ff ff [ 11.808085] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 11.808097] saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 06 32 97 04 00 20 00 ff ff ff [ 11.808108] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.808120] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.808131] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.808143] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 b8 fa 6c f0 73 05 29 00 [ 11.808154] saa7133[0]: i2c eeprom 90: 84 08 00 06 89 06 01 00 95 39 8d 72 07 70 73 09 [ 11.808166] saa7133[0]: i2c eeprom a0: 23 5f 73 0a f4 9b 72 0b 2f 72 0e 01 72 0f 45 72 [ 11.808178] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 73 13 a2 69 79 77 00 00 00 00 00 [ 11.808189] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.808200] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.808212] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.808223] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 11.808240] tveeprom 14-0050: Hauppauge model 67209, rev C3F5, serial# 7142072 [ 11.808243] tveeprom 14-0050: MAC address is 00:0d:fe:6c:fa:b8 [ 11.808246] tveeprom 14-0050: tuner model is NXP 18271C2 (idx 155, type 54) [ 11.808249] tveeprom 14-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) [ 11.808253] tveeprom 14-0050: audio processor is SAA7131 (idx 41) [ 11.808255] tveeprom 14-0050: decoder processor is SAA7131 (idx 35) [ 11.808257] tveeprom 14-0050: has radio, has IR receiver, has no IR transmitter [ 11.808260] saa7133[0]: hauppauge eeprom: model=67209 [ 11.812515] IR JVC protocol handler initialized [ 11.845541] IR Sony protocol handler initialized [ 11.845694] i2c-core: driver [tuner] using legacy suspend method [ 11.845697] i2c-core: driver [tuner] using legacy resume method [ 11.847092] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro [ 11.901407] input: MCE IR Keyboard/Mouse (saa7134) as /devices/virtual/input/input11 [ 11.902425] IR MCE Keyboard/mouse protocol handler initialized [ 11.946854] lirc_dev: IR Remote Control driver registered, major 250 [ 11.948158] rc rc0: lirc_dev: driver ir-lirc-codec (saa7134) registered at minor = 0 [ 11.948161] IR LIRC bridge handler initialized [ 11.964039] tuner 14-004b: Tuner -1 found with type(s) Radio TV. [ 12.044026] tda829x 14-004b: setting tuner address to 60 [ 12.204253] tda18271 14-0060: creating new instance [ 12.252032] TDA18271HD/C2 detected @ 14-0060 [ 12.281154] init: failsafe main process (730) killed by TERM signal [ 12.403128] Bluetooth: Core ver 2.16 [ 12.403186] NET: Registered protocol family 31 [ 12.403189] Bluetooth: HCI device and connection manager initialized [ 12.403193] Bluetooth: HCI socket layer initialized [ 12.403195] Bluetooth: L2CAP socket layer initialized [ 12.403436] Bluetooth: SCO socket layer initialized [ 12.409578] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 12.409582] Bluetooth: BNEP filters: protocol multicast [ 12.515329] type=1400 audit(1336633043.203:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=804 comm="apparmor_parser" [ 12.515872] type=1400 audit(1336633043.203:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=804 comm="apparmor_parser" [ 12.516874] Bluetooth: RFCOMM TTY layer initialized [ 12.516881] Bluetooth: RFCOMM socket layer initialized [ 12.516883] Bluetooth: RFCOMM ver 1.11 [ 12.554234] type=1400 audit(1336633043.243:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=825 comm="apparmor_parser" [ 12.556240] type=1400 audit(1336633043.247:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=826 comm="apparmor_parser" [ 12.556700] type=1400 audit(1336633043.247:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=826 comm="apparmor_parser" [ 12.558431] type=1400 audit(1336633043.247:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=826 comm="apparmor_parser" [ 12.574299] type=1400 audit(1336633043.263:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=830 comm="apparmor_parser" [ 12.714682] r8169 0000:02:00.0: eth0: link down [ 12.714853] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.715237] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.769468] r8169 0000:03:00.0: eth1: link down [ 12.769476] r8169 0000:03:00.0: eth1: link down [ 12.769956] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 12.770566] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 13.592019] tda18271: performing RF tracking filter calibration [ 13.805315] init: plymouth-stop pre-start process (1156) terminated with status 1 [ 15.212173] r8169 0000:03:00.0: eth1: link up [ 15.212334] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 26.096019] eth1: no IPv6 routers present [ 31.804028] tda18271: RF tracking filter calibration complete [ 31.860024] tda829x 14-004b: type set to tda8290+18271 [ 36.604249] saa7133[0]: dsp access error [ 36.604252] saa7133[0]: dsp access error [ 36.604277] saa7133[0]: dsp access error [ 36.604279] saa7133[0]: dsp access error [ 36.668243] saa7133[0]: registered device video0 [v4l2] [ 36.668296] saa7133[0]: registered device vbi0 [ 36.668337] saa7133[0]: registered device radio0 [ 36.710020] saa7134 ALSA driver for DMA sound loaded [ 36.710055] saa7133[0]/alsa: saa7133[0] at 0xfebff000 irq 17 registered as card -2 [ 36.715407] dvb_init() allocating 1 frontend [ 37.048028] tda829x 14-004b: type set to tda8290 [ 37.096035] tda18271 14-0060: attaching existing instance [ 37.096044] DVB: registering new adapter (saa7133[0]) [ 37.096050] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)... [ 37.632022] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 37.655933] tda10048_firmware_upload: Upload failed. (file not found?) [ 38.896029] tda18271_write_regs: [14-0060|M] ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 38.896035] tda18271_init: [14-0060|M] error -5 on line 831 [ 38.896041] tda18271_tune: [14-0060|M] error -5 on line 909 [ 38.896044] tda18271_set_analog_params: [14-0060|M] error -5 on line 1050 [ 63.044499] audit_printk_skb: 36 callbacks suppressed [ 63.044504] type=1400 audit(1336633094.346:24): apparmor="DENIED" operation="open" parent=1 profile="/usr/lib/telepathy/mission-control-5" name="/usr/share/gvfs/remote-volume-monitors/" pid=1866 comm="mission-control" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0

lsmod

Module Size Used by tda10048 18426 1 saa7134_dvb 33449 0 saa7134_alsa 18172 1 videobuf_dvb 13867 1 saa7134_dvb dvb_core 94814 1 videobuf_dvb rfcomm 38139 0 bnep 17830 2 bluetooth 158438 10 rfcomm,bnep tda18271 41188 2 ir_lirc_codec 12739 0 lirc_dev 18700 1 ir_lirc_codec tda8290 22216 2 ir_mce_kbd_decoder 12681 0 tuner 26836 1 ir_sony_decoder 12462 0 ir_jvc_decoder 12459 0 ir_rc6_decoder 12459 0 rc_hauppauge 12484 0 ppdev 12849 0 saa7134 153846 2 saa7134_dvb,saa7134_alsa ir_rc5_decoder 12459 0 ir_nec_decoder 12459 0 snd_hda_codec_realtek 174055 1 rc_core 21263 10 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,rc_hauppauge,saa7134,ir_rc5_decoder,ir_nec_decoder snd_hda_intel 32765 3 snd_hda_codec 109562 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 3 saa7134_alsa,snd_hda_intel,snd_hda_codec videobuf_dma_sg 18786 3 saa7134_dvb,saa7134_alsa,saa7134 videobuf_core 25409 3 videobuf_dvb,saa7134,videobuf_dma_sg snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi v4l2_common 15793 2 tuner,saa7134 snd_seq_midi_event 14475 1 snd_seq_midi psmouse 72846 0 joydev 17393 0 parport_pc 32114 1 snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event videodev 86588 3 tuner,saa7134,v4l2_common snd_timer 28931 2 snd_pcm,snd_seq tveeprom 17009 1 saa7134 snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq mac_hid 13077 0 serio_raw 13027 0 snd 62064 18 saa7134_alsa,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd snd_page_alloc 14108 2 snd_hda_intel,snd_pcm i915 414603 3 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 lp 17455 0 parport 40930 3 ppdev,parport_pc,lp usbhid 41906 0 hid 77367 1 usbhid r8169 56321 0

link: http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1110

mrdominuzq commented 12 years ago

if you are using the lastest the firmware should already be there.

https://github.com/OpenELEC/dvb-firmware/commit/e101575fdb76ac0e92eebd01184ffbedcb23549f

d0v1k commented 12 years ago

am using the latest generic lspci show

03:01.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)

but tv headend doent dectect the card dmesg does not show the card is registered.

d0v1k commented 12 years ago

I see saa7134 is not set in linux.i386.conf

CONFIG_VIDEO_SAA7134 is not set

dmesg | grep saa7134 [ 11.594860] saa7134 0000:03:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.656398] input: saa7134 IR (Hauppauge WinTV-HVR as /devices/pci0000:00/0000:00:1e.0/0000:03:01.0/rc/rc0/input10 [ 11.656495] rc0: saa7134 IR (Hauppauge WinTV-HVR as /devices/pci0000:00/0000:00:1e.0/0000:03:01.0/rc/rc0 [ 11.901407] input: MCE IR Keyboard/Mouse (saa7134) as /devices/virtual/input/input11 [ 11.948158] rc rc0: lirc_dev: driver ir-lirc-codec (saa7134) registered at minor = 0 [ 36.710020] saa7134 ALSA driver for DMA sound loaded

mrdominuzq commented 12 years ago

its related to #163.

bibinne commented 12 years ago

there is another "bug" with this card. The firmware is long to load and so there is a race competition with tvheadend if tvheadend is launched too early at boot. To solve it i have had a "sleep 5" in /etc.rc.d/tvheadend.

I saw that Sraue solved it by a better way ^^ in Openelectvheadendservice :

"https://github.com/OpenELEC/OpenELEC.tv/commit/97da95def965264ad759c7a020db33d942d2f9f8#-P0" but i think it should be merge in Tvheadend master, but my login in tvheadendforum doesn't work anymore and don't have time to recreate one ^^.